PDA

View Full Version : Toyota Rav4 2013 Key



MilanToyota2
23rd April, 2015, 04:39 PM
Hello brothers, someone has already programmed the key to this Toyota Rav4 2013. It uses the chip H someone how to read these ImmoBox case?

Siham
23rd April, 2015, 10:38 PM
Solutions for you :

-Master Gwee
-AVDI with tn005
-TK prog
-Get one new immobox

:)

MilanToyota2
24th April, 2015, 07:26 AM
Thank you my brother, I already TN005 the software I can not get the chip programmed H

MilanToyota2
24th April, 2015, 07:29 AM
This is the software TN005

wd bau
24th April, 2015, 08:36 AM
hi
is this lost key situation OR adding key ? for adding keys TIS can do it, if lost i did not think AVDI can reset immo.

rex89
24th April, 2015, 08:42 AM
hi guys , i try on toyota rav4 year 2014 X100+ with option G chip reset and add H chip without problem after 20 min for reset immo , car start.

MilanToyota2
24th April, 2015, 09:23 AM
salut mon fr?re, je ai le X-100 + je ai essay? sans succ?s:hmmmm2:

MilanToyota2
24th April, 2015, 04:52 PM
person of the forum is to start this 2013 Toyota Rav4 has lost all keys brothers:hmpf:

PCF
24th April, 2015, 10:08 PM
mmm i have same problem and i think Master Gwee is the one that he can solve it
thanks

abvayani
25th April, 2015, 03:14 AM
Master Gwee Is Best. i learn soo many thing From Master Gwee.

ray-ray
25th April, 2015, 06:08 AM
Did you test the chip on the board for it mode? 8bit or 16bit was pin 7 grounded to pin 5 that make it 8bit mode to read. Did you get a read from the dump?

Siham
25th April, 2015, 07:44 AM
What kind of chips it is ?
Seams we need to solder a c86 to read it.....but for rewrite it ??....
MilanToyota if you have original AVDI ask help to AVDI support.

MilanToyota2
25th April, 2015, 08:36 AM
Thank you my brothers, I ask for help has AVDI he is telling me to buy a new ImmoBox that the product can reset it by model

PCF
25th April, 2015, 09:08 AM
i have same problem and i order new immo box yesterday cuz no answer till now and i should deliver the car

MilanToyota2
25th April, 2015, 09:36 AM
You bought a new key box and you could not solve your problem with the original AVDI?

PCF
25th April, 2015, 09:56 AM
no i order it but didnt get it yet i have avdi but dont have yhe function TN005 but i think even x-100 or ck-100 can add it if its new box

MilanToyota2
25th April, 2015, 10:00 AM
I have the TN005 and or you place the order of the immobilizer box?

ray-ray
25th April, 2015, 02:41 PM
IC4 you desoldier that chip (56r) 93c56 ?

MilanToyota2
25th April, 2015, 05:13 PM
Gwee you have solution for this Rav4?

PremierD
25th April, 2015, 05:29 PM
Gwee you have solution for this Rav4?


What do you think mate ?............lol

MilanToyota2
25th April, 2015, 06:25 PM
what is the solution bosses?

ray-ray
25th April, 2015, 08:56 PM
Does anyone see the 56r chip that has been remove and is sitting to the left of the plug in. Look at it did that come off ic4.

Siham
25th April, 2015, 10:56 PM
Yes good eyes Ray Ray :) ,did not see this detail.
MilanToyota did you desoldered thi one?

PCF
26th April, 2015, 12:22 AM
there is no chip 56r on the location ic4 it came empty :(

Siham
26th April, 2015, 01:43 AM
Yes IC4 come empty,but if we solder an c86/66/46 and reconnect the immobox in the car and you can record anything switching ignition on :positive: ,immo data are stored in C10 the big mcu.
But i do not know what kind of chip it is. :)

Siham
26th April, 2015, 02:03 AM
No,I never came accross an toyota with H keys . :)
Just refering about what i read in this post http://www.digital-kaos.co.uk/forums/showthread.php/397827-TOYOTA-RAV4-YEAR-2013-ALL-KEYS-LOST?highlight=toyota+rav4+year+2013
:02.47-tranquillity:

Siham
26th April, 2015, 02:13 AM
So what to do Master ?

ray-ray
26th April, 2015, 05:35 AM
Gwen, my first time seeing pcb board and there is empty ic4 pad and loose 56r chip by the plug in (fact). Moving on,a closer look at the board you can see that pin 1 & 4 is label and pin 7 is tied to 5 making it 8 bit mode 93series EEPROM that can be used. 48pin mcu that has dual eeprom function (internal & exteral).
pin47=brown
pin46=red
pin45=orange
pin44=yellow
Pin4=VCC (blue pin6 is tied to pin8 on the eeprom)

maybe these immo. get use on a Subaru with the external eeprom attach.

Siham
26th April, 2015, 05:52 AM
Gwen, my first time seeing pcb board and there is empty ic4 pad and loose 56r chip by the plug in (fact). Moving on,a closer look at the board you can see that pin 1 & 4 is label and pin 7 is tied to 5 making it 8 bit mode 93series EEPROM that can be used. 48pin mcu that has dual eeprom function (internal & exteral).
pin47=brown
pin46=red
pin45=orange
pin44=yellow
Pin4=VCC (blue pin6 is tied to pin8 on the eeprom)

maybe these immo. get use on a Subaru with the external eeprom attach.

I was thinking about this dual eeprom fonctions ,that it will be possible to read and write the big mcu using an eeprom 93xx but it seams that it will not work .
Ray-ray the colors that you are refering is for what kind of programmer?What do you mean by ''pin 1 and 4 is label ''?
Will try to ask to someone that i know what procedure he use with his TK-Prog IF he updated it with latest version.
But problem it will be How to reset it to registration state??:stung:
Maked a litle research an found this :http://www.holtek.com.tw/english/docum/8bit_Flash_MCU/66F0187.htm

MilanToyota2
26th April, 2015, 08:36 AM
Gwee sending the immobilizer map on this Rav4 what would you do to read it? what solution you can bring to us has helped find the solution

Siham
26th April, 2015, 08:57 AM
MilanToyota what i do not understand is why you do not do it with your AVDI or request help from ABRITES :dontknow::dontknow::dontknow:
, look here http://www.abrites.com/products/abrites-diagnostics/for-toyota-lexus-scion
diagnostic reset of latest generation Immobilizers (without eeprom) produced while 2014

You will also need the tag tool Version 7.http://www.abrites.com/products/transponder-programmer

MilanToyota2
26th April, 2015, 09:06 AM
Siham I have already asked for help has AVDI he answered me to find another new immobilizer

Siham
26th April, 2015, 09:17 AM
If that ,Abrites lie on some fonctions :) !!!! Spoke with them and they confirmed that it will be no problem for all toyota models even with H chips.
Also they wrote in their website that it work,bad peoples.......
And i was ready to order it case that i get one case with H chips.
My friend only solution for you now is to order new immobox,i saw in youtube that achacha solved many case with H key ,but how ??:dontknow:

MilanToyota2
26th April, 2015, 09:21 AM
can you give me link

PremierD
26th April, 2015, 09:21 AM
",Abrites are really big cheatters !!!! ".........................:eek: I'm shocked and astounded mate .... lol

Siham
26th April, 2015, 09:38 AM
",Abrites are really big cheatters !!!! ".........................:eek: I'm shocked and astounded mate .... lol

Sorry , I mean why they say they can do when it cannot ?
They wrote it on their website and when customer ask for support he get a S***** answer .when workshop invest money in expensive tool like AVDI you will expect that it do what they (abrite) claimed.
We are speaking about original tool not clone or chinese or whatever .
Sorry Premier if I shocked , will modify my post. :)

PremierD
26th April, 2015, 09:39 AM
:roflmao: ...... :top:

Siham
26th April, 2015, 09:42 AM
:witless:Happy to make you laughing .:excitement:
LOOL!!

Siham
26th April, 2015, 09:53 AM
can you give me link

https://www.youtube.com/watch?v=kZJX7NZdW0c

MilanToyota2
26th April, 2015, 09:54 AM
AVDI not tell the truth

ray-ray
26th April, 2015, 02:53 PM
Silk screen on the pcb board pin 1&4 and you can see the trance on 7tied to 5 making it 8bit mode. The color was for 93series read.
1=br.(CI)2=red(CLK)3=orange(DI)4=yellow(DO)5=green (VSS)6=blue(ORG)7=violet(NU)=grey(VCC)
if you pin out the mcu then you can try to match the mask or learn more about it boot.

so where would they use these immo.
Toyota>>Subaru>>Daihatsu>>mitsubishi

PCF
27th April, 2015, 09:35 PM
hello friends i solvemy problem before getting the new immo i put the immo of a rav4 2010 G-type and connect the ring of the old model also by wiring to the immo cuz ring of 2013 cant read the g type key and i did reset 5 and 13 and them start the car
thanks

MilanToyota2
12th May, 2015, 09:12 AM
hello brothers, the Toyota Rav4 2014 I spent ImmoBox control. I'll tell the resulta after programming

alhengary
18th May, 2015, 10:54 PM
we waiting you for result

MilanToyota2
2nd June, 2015, 09:15 AM
Hello brothers, the new immobilizer box arrived on AVDI still can by programmed key. to my knowledge I believe that we need a master key to open the security

MilanToyota2
2nd June, 2015, 10:26 AM
someone could give me the link of the website

(Tis Techstream)

tqnata83
2nd June, 2015, 01:21 PM
http://blog.uobd2.net/toyota-tis-techstream-9-30-002-software-download/

MilanToyota2
2nd June, 2015, 03:20 PM
Said my brother is the original?

vanos batam
2nd June, 2015, 03:25 PM
You can use kkl usb vag com

MilanToyota2
2nd June, 2015, 03:28 PM
gave me the link please brother

MilanToyota2
2nd June, 2015, 03:31 PM
vag com usb kkl can program the toyota rav4?

MilanToyota2
4th June, 2015, 07:03 PM
Hello brothers, thank you to you and the Toyota Rav4 2014 end start:rock::rock::rock:

alhengary
5th June, 2015, 09:44 AM
how you started it

MilanToyota2
5th June, 2015, 02:23 PM
No boss with what tool I can do this reset:) AVDI can not reset

Niaz
5th June, 2015, 05:42 PM
AVDI can not reset
Hmm i know & there (or dealer) attitude is 70% & Gwee attitude only 10% but works every time 1000% & he never want a single penny i think is better than ever ...... Great job mate i learn many from you .. :)