View Full Version : Audi A4 95 Immo Off
ayala
23rd April, 2015, 08:44 PM
Hi, i have this Audi ECU:
A4 1995
ECU 261 203 938/939
B58283 - 24c02
310723
Can someone please help me Immo Off, because Immo Box is not working at all
Thanks in advance for your help
daniersms
24th April, 2015, 05:55 AM
This file is super ok just remove immo box and bridge 2 wires for comms with ecu
ayala
24th April, 2015, 09:05 AM
This file is super ok just remove immo box and bridge 2 wires for comms with ecu
Thank you so much
One more favor, can you please show me a picture to know which wires I have to bridge?
Thanks in advance
daniersms
24th April, 2015, 12:40 PM
Ok just bridge green/red and green/black for comms with ecu
ayala
24th April, 2015, 07:44 PM
Unfortunately the file didn?t work
Can someone please help me with another Immo Off file?
Thanks again
OFFIMO
24th April, 2015, 09:29 PM
this vehicle has a 28F010 32PLCC
Shmortz
26th April, 2015, 05:52 PM
try and report
fanos
27th April, 2015, 04:49 PM
Try this and cut immobox: 311161
ayala
28th April, 2015, 01:24 AM
try and report
Thanks Shmortz, but the dump you sent me is the same as the original dump I posted, I just compared them
ayala
29th April, 2015, 02:56 AM
Try this and cut immobox: 311161
Thank you so much fanos, dump is perfect and car is running now :D
fanos
29th April, 2015, 03:46 AM
.............. :elefant: ............
ayala
30th April, 2015, 02:23 PM
It is really strange but the car doesn't run and immobilizer code appears again 'Engine blocked by immobilizer'.
Do I have to do something else on the car?
fanos
30th April, 2015, 04:25 PM
Remove the immobox, rewrite 24C02 with the code, lift 7pin and put it over 8pin and ready.
ayala
3rd May, 2015, 04:17 PM
Remove the immobox, rewrite 24C02 with the code, lift 7pin and put it over 8pin and ready.
Pin 7 is empty on the immobox connector, can you please tell me the colors of the cables I have to bridge?
Thanks in advance
crisgsm
4th May, 2015, 10:03 AM
Pin 7 is empty on the immobox connector, can you please tell me the colors of the cables I have to bridge?
Thanks in advance
pin 7 over pin 8 on 24c02
crisgsm
4th May, 2015, 10:09 AM
remove immo box and bridge 2 wires, w and k
w is pin 9 and k is 10
zdzicho1233
4th May, 2015, 10:12 AM
Lift 7pin and put it over 8pin in eprom no in immobox
regards
Shmortz
4th May, 2015, 05:56 PM
Thanks Shmortz, but the dump you sent me is the same as the original dump I posted, I just compared them
sorry I made mistake, now dump is OK (same pass), write it and start car, no need to lift any pin on 24C02...
autochei
5th May, 2015, 10:18 AM
immo come back after u disconect batery
ayala
6th May, 2015, 05:19 AM
and what will happen when u disconnect battery ? lol
The car starts one time only, after that it is immobilized again, even if i disconnect the battery
Shmortz
8th May, 2015, 09:23 AM
Never had any problem after disconnecting battery with that solution, tested on many cars!
Sent from my LG-D855 using Tapatalk
KFZ
8th June, 2015, 09:09 PM
Thank you so much fanos, dump is perfect and car is running now :D
Hi
I have got the same car and same ecu
will you send me the password for Mr.fanos dump please ?
Regards
Shmortz
12th June, 2015, 06:34 AM
here is dump working with all petrol ECU with 24C02 without pass...
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.