PDA

View Full Version : corsa 2015



raf0468
24th April, 2015, 08:57 PM
Hi anybody know whats inside this car can odometer be done yet thanks...

nadger
24th April, 2015, 09:11 PM
I asked the same question about a month ago, im still no wiser im afraid. I cannot seem to find any info

smartymarti
25th April, 2015, 09:38 AM
try it as a mokka obd should go if not astra probably same logg in

drpeter
5th July, 2015, 08:11 PM
try it as a mokka obd should go if not astra probably same logg in I get the same car soon anyone tested a corsa 2015 meanwhile?

lupu_sandu
6th July, 2015, 12:02 AM
I bet that will be a new BCM with 95320 or NEC (as Meriva), same algo as old one.

dave11674
6th July, 2015, 12:05 AM
nadger did one of these recently guys

he used smok using the astra/insignia software :)

dave

drpeter
6th July, 2015, 08:24 PM
nadger did one of these recently guys

he used smok using the astra/insignia software :)

daveDone this car today, acces denied with several tools, removed bcu was 24c16 20 minutes job. Need to buy a update.

captain crackers
7th July, 2015, 12:00 AM
drpeter, where is the bcu? Do you have any pics of it in the car? Arthur.

drpeter
7th July, 2015, 09:31 AM
drpeter, where is the bcu? Do you have any pics of it in the car? Arthur.

No pictures sorry, bcu is located driver side lower panel, very easy to remove. Remove 1 trox lower panel remove panel just pull, bcu is clipped in holder, remove connectors there is plenty of room, cables are long.

dave11674
7th July, 2015, 09:47 PM
my guy nadger said he did it with smok insignia program

dave

drpeter
7th July, 2015, 10:20 PM
Yes new insignia soft must work but the old versions not. Tried with fvdi and digiprog. But manually isn' t difficult.

dave11674
8th July, 2015, 12:30 AM
no the bcm's are easy to do :)

dave

nadger
9th July, 2015, 09:58 PM
My Girls corsa was brand new registered in UK 28.03.2015,

I used Smok Opel and Astra/insignia CAN option, it said security access failed but still read in KM, I wrote it back in KM too, I reckon the whole job via OBD takes no more than 1 minute (yes 60 seconds)

nadger
9th July, 2015, 10:03 PM
forgot to say.....


you must remove keys for a few seconds for the new miles to be displayed