View Full Version : Renault megane 2.0t 180hp ecu continental EMS3110 how to read by galletto
mellon
28th April, 2015, 07:25 AM
Hi,
I need read/write ecu from megane 2010year Continental EMS3110. Did you have connection on bench or maybe works by obd. Car is far away from me.
Best regards
Adam
ABD ERRAHMANE
28th April, 2015, 09:31 AM
galletto is not compatible to continental ecu
wiseman
28th April, 2015, 09:57 AM
You can read/write Obd E.g MPPS
258
1st May, 2015, 10:04 AM
Kess read/write fine ,you need first coolant temp below 40 C, and diagnostic mode
Renault Megane III, Scenic III and Laguna III the ignition mode is:
How to start diagnostic mode:
1) close the door and wait 10 sec
2) open the door
3) insert the card
4) engage first gear
5) don't press any pedal
6) press and hold the start button until you see "remove the card" message
7) don't remove the card
8) it's now possible to read/write
mellon
17th May, 2015, 06:10 AM
I don't have this car but very big thanks!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.