View Full Version : Ford 6000cd M-series Carprog connections
czaderx
28th April, 2015, 12:45 PM
hi all,
I have ford 6000 cd M-series radio. Its locked now. I would like to use carprog to reset counter and get a code but can't get communication with radio using CARPROG and cable a10 and connection as per picture.
Can you upload correct pins connections, please?
clydey
28th April, 2015, 12:49 PM
locked 10 or locked 13?
not using carprog but m series codes can be done by serial.
Mezz_cro
28th April, 2015, 12:51 PM
Hello
If is locked10 you can turn on radio and press button(number) 6 for a 10 seconds and he must give you another chance to enter code and with carprog you can calculate code for him because it s M series.
Regards
czaderx
28th April, 2015, 12:52 PM
M059502 not sure if is locked10 or 13
clydey
28th April, 2015, 12:55 PM
try 7407 cheers
RadioChiP
28th April, 2015, 12:55 PM
6000CD ???
6000CD RDS EON???
Part number?
czaderx
28th April, 2015, 01:07 PM
4M5T-18C815AC
SINGLE 6000 CD
how to connect carprog?
RadioChiP
28th April, 2015, 01:24 PM
eeprom is Locked
czaderx
28th April, 2015, 01:51 PM
so in this case how to unlock it?
Mezz_cro
28th April, 2015, 02:37 PM
Hello
Still you didn t answer on question,it s LOCKED 10 or LOCKED 13 ?
Regards
czaderx
3rd May, 2015, 11:12 AM
Radio now ok just needs to hold 6 for few sec and put right pincode.thanks all for help
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.