Vag com K1 shot to +12

[Liteace]

Hi all have a look at the screen shot, Ive checked the aftermarket radio problem and its not that. I have also traced the data wires from the ODB socket to the relay block and they are ok, I have also unplugged the wires from the relay block & check to make sure they have no power or been hacked and they are fine. Any idea's anyone ??

Thanks
Steve

[vares]

Probably K line driver is dead.Put here 2 good quality fotos from adaptor insides.

[Liteace]

Probably K line driver is dead.Put here 2 good quality fotos from adaptor insides.


Photo's of what ?? The vag-com dongle

[vares]

Yep,on the photos will be seen what drivers are used.
Do a simple test on the table - Bring 12v to pin 16-plus and 4,5-minus and do the test adapter in VagCom options.

[Liteace]

Yep,on the photos will be seen what drivers are used.
Do a simple test on the table - Bring 12v to pin 16-plus and 4,5-minus and do the test adapter in VagCom options.

Hi I have done that and am still getting the same problem, so the problem is the dongle what can be checked ??

Thanks
Steve

[vares]

I think that you have a Chinese interface and nobody knows what he maded in this case. Drivers can be performed on the transistors or two SI9241 chips.

[vares]

Take this for help.

[dylan54]

thank you very much

[hmc]

what vw did you try it on buddy ,as voltage regulators have done this to interfaces in the past & thats what spiked the dongle interface ,resistors can go dodgey also

[Algol]

Take this for help.

This file is now inacessible:bawling:

[robertk]

Its not working...

[hegice]

Broken link

[autocargo]

Hi all have a look at the screen shot, Ive checked the aftermarket radio problem and its not that. I have also traced the data wires from the ODB socket to the relay block and they are ok, I have also unplugged the wires from the relay block & check to make sure they have no power or been hacked and they are fine. Any idea's anyone ??

Thanks
Steve

Hello Liteace have you found the problem with your cable? I've got one with exactly the same problem. Have you or anybody else a solution to this problem?

[Liteace]

Hello Liteace have you found the problem with your cable? I've got one with exactly the same problem. Have you or anybody else a solution to this problem?


I sent it back to the guy i got it from in the UK, he sent me another working but older cable, I sold it and got myself a genuine Ross-tech cable I cant be pi**ing about unreliable rubbish

[autocargo]

OK,thanks m8. Anybody else has any ideas?