PDA

View Full Version : Connect Emulator Which is W-LINE? 036906034CB



DJairbag
10th May, 2015, 12:19 PM
Hello,

i have Skoda Fabie which has problems with IMMO. So friend of mine told me with emulator without can it is possible to start car. I could figure out this connections:

3 +12V
4 ACC
1,2 ground
43 Diagnosis


Bit to connect Emulator i Need W Line / Kline.

Does someone know for this ecu the Wline, thanks very much!!!

Shmortz
10th May, 2015, 12:47 PM
if immo is not CAN based, code must be transmited via K-line, in this case diagnosis pin43, try to cut pin43 wire, connect emulator and try to start, but I think that car is with immo3, afaik emulators work only on immo1/2 based systems...

autofan1965
10th May, 2015, 01:06 PM
Your ecu is 2002 year its immo3 and emulator work till immo2 generation.

simaservis1108
10th May, 2015, 01:38 PM
Not possible immo off or the emulator for this ECU.
Find problem and fix it.

DJairbag
10th May, 2015, 02:23 PM
Hello,

problem is that car is very far from me. So i can not work on car. I can just work on ecu. So does mean it is not possible to make this car running?
And no emulator on markt avaibable for immo 3?