PDA

View Full Version : sid206 regeneration after dpf off



yeager
11th May, 2015, 08:19 PM
hi, i turn off dpf whit volta on mondeo sid206. one month car work without problem but yesterday customer call me, while car make regeneration. i write back original file make dpf reset, turn off again dpf but not help, same problem, can anyone help me whit this?

LaraVAG
11th May, 2015, 08:31 PM
read by bdm, I can help.

robert54
11th May, 2015, 08:57 PM
Volta is no good!!!! Manual Solution.

yeager
11th May, 2015, 09:12 PM
other way not exist?

edit: i think possible turn off only in bdm read?

LaraVAG
11th May, 2015, 10:15 PM
In bdm read it''s more easy.

yeager
12th May, 2015, 09:10 AM
thx for all helper, problem solved now ...

yeager
8th July, 2015, 01:51 PM
problem not solved, i try more files but after 3-4 weeks, regeneration turn on ... :(
not exist working solution for it?

ecutuners
8th July, 2015, 03:20 PM
Manual solution work perfect no regeneration ever again.

yeager
8th July, 2015, 07:06 PM
it work on obd read? or only on BDM?

gitko
8th July, 2015, 08:30 PM
Doesn't matter

majsterx
9th July, 2015, 08:27 AM
Can OBD dump, no needed BDM, but only manual solution for it. Never try use "free" distributed tool.

imcumen
11th July, 2015, 04:04 AM
here you are dpf_off
pass in pm

sanderman
4th June, 2016, 09:44 PM
I've removed dpf and egr but my car, a mondeo 2000 tdci 103kw with sid 206, after some weeks start regeneration again. I've read this thread and also if it is one year old I wonder if in the end with the incumen file resolves the problem ?

hcwc
4th June, 2016, 11:52 PM
Volta software is a crap, don't use it if you don't want to make a 'ghost car'

Post your dump and maybe someone will do dpf and egr off for you. You're a new member so wait patiently

sanderman
5th June, 2016, 08:29 AM
Volta software is a crap, don't use it if you don't want to make a 'ghost car'

Post your dump and maybe someone will do dpf and egr off for you. You're a new member so wait patiently

I thought that the file was identical for all Mondeo with that unit?? I must open a new thread for my dump!

overs0ull
5th June, 2016, 10:37 AM
BDm read and manual solution for that Ecu and never more regeneration ,maked lot of them.

CustomCars
5th June, 2016, 10:48 AM
SID is ok by OBD too, but not all DTC can be removed, anyway for DPF enough

furnata
5th June, 2016, 10:52 AM
And new swiftech solution work ok

sanderman
5th June, 2016, 03:34 PM
Thanks to everyone who have interest to support my problem. The files posted by Incumen is working? It has already been tested by someone?

morgano
5th June, 2016, 05:38 PM
As general rule if @incumen uploads a file for someone it is working fine.

sanderman
10th June, 2016, 11:31 PM
As general rule if @incumen uploads a file for someone it is working fine.

But someone has already tested the file?
You must follow a specific procedure before the flash?
I can do via obd?
Thank you!!

yeager
11th June, 2016, 05:54 AM
hi
i try on this car 4-5 version, noone work ... customer buy a new dpf and i write him back original file ... but it was one year before

overs0ull
11th June, 2016, 06:38 PM
Obd not enough for 100% dpf off! If you want all to be OK and car never come back BDm and manual solution and bye .