PDA

View Full Version : HOW TO READ MPC562MZP56 - IVECO 0281012193 WITH FGTECH GALLETTO 4?



leandroks
15th May, 2015, 03:53 PM
Could any1 get me the pinout to read that ecu using galetto???
Thanks in advance...



http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=313657&stc=1

hcwc
15th May, 2015, 04:38 PM
You have BDM points, read galletto manual :burnout:

leandroks
15th May, 2015, 04:41 PM
don?t have this ECU

nexusjose
15th May, 2015, 05:47 PM
Look a EDC16c39 is you ECU

mbtun
15th May, 2015, 07:14 PM
in your picture pin 1 is to the left. just use bosch probe and read as any other edc16

mario38
16th May, 2015, 06:44 AM
Could any1 get me the pinout to read that ecu using galetto???
Thanks in advance...



http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=313657&stc=1

read this type is very simple ..
bdm100 or you can use a more modern atrezzo fgtech2 .. look at the picture to see the basic connection .. if you have bdm100 fgtech2 or you can follow the instructions in the file documents, looks down my attached photo

leandroks
18th May, 2015, 02:24 PM
i have FGTECH4 and i can?t read... what cable i use in FGTECH4 ?

Fantomisback
18th May, 2015, 02:48 PM
u have all instruction in FgTech Documents