View Full Version : DSG transmission DQ200 and DQ250 programer
yugo45
16th May, 2015, 08:20 PM
Anyone has any feed back for this tool:
http://www.cardiag.co.uk/mini-dsg-reader-dq200-dq250-for-vw-audi.html
Or if anyone can reccomend where toy buy good programer for DSG transmission on VAG cars.
Thanks
koyot
16th May, 2015, 10:43 PM
nemislis valjda fleshovat dsg ssa ovim
tiguan
16th May, 2015, 10:46 PM
I have this tool works well
yugo45
16th May, 2015, 11:19 PM
nemislis valjda fleshovat dsg ssa ovim
If you know better solution , please let me know.
yugo45
13th September, 2015, 03:53 AM
Anyone can recommend where to buy good programmer for DSG transmission on VAG cars ???
Thanks in advance
ominimicu
13th September, 2015, 11:33 AM
why not use kESS!
Dobermann
15th September, 2015, 12:54 AM
why not use kESS!
because Kess will not work on many DSG ! I testet many Cars and on older one DSG Kess dont work ! the newer one with tricore work OK for me !
cawadany
15th September, 2015, 08:06 AM
Mini dsg reader no problem on old DSG DQ250 Cxx.
Dobermann
15th September, 2015, 11:59 AM
Mini dsg reader no problem on old DSG DQ250 Cxx.
Read and write ??? or only Read?
ominimicu
15th September, 2015, 12:07 PM
have u tried good quality kess? or just china normal one?
i never tested i m curious to know!
ecutuners
15th September, 2015, 12:17 PM
With direct cable (not obd2) DQ200 and DQ250 read and write perfect with good quality Kess, my Kess also support DQ500 read and write. I did all 3 of these TCU successfully
ominimicu
15th September, 2015, 12:28 PM
i knew it :D thanks danny!
atomiczen
15th September, 2015, 01:53 PM
made dq200 obd with kess clone 2.08
read and write ok
Dobermann
15th September, 2015, 06:54 PM
have u tried good quality kess? or just china normal one?
i never tested i m curious to know!
Yes i have ! i have 3 Kess Clones China reworked , blue EU und Red CP ! on all clones the same problem with older one dsg ! a friend of me have Kess original and its same problem with original kess !
i tryed many cars ! Only Golf 6 R 2010 with tricore r/w OK
cawadany
15th September, 2015, 09:13 PM
Read and write ??? or only Read?
Read and write. Tested directly on tcu.
djollie
18th September, 2015, 04:22 AM
With direct cable (not obd2) DQ200 and DQ250 read and write perfect with good quality Kess, my Kess also support DQ500 read and write. I did all 3 of these TCU successfully
can you contact me i'm need to speak to you regarding the ktag you sold me
erdilmen
14th December, 2015, 09:24 PM
With direct cable (not obd2) DQ200 and DQ250 read and write perfect with good quality Kess, my Kess also support DQ500 read and write. I did all 3 of these TCU successfully
with which version of clone kess ? and is ur cable resistor on can lines?
Sent from my iPhone using Tapatalk
nike1975
15th December, 2015, 01:53 PM
i use and work ok...
erdilmen
16th December, 2015, 08:09 PM
made dq200 obd with kess clone 2.08
read and write ok
is it chinesee or europe clone?
Whats is your firmware?
CustomCars
16th December, 2015, 10:06 PM
is it chinesee or europe clone?
Whats is your firmware?
Reworked, newest avalible fw, software 2.10 and will be work.
erdilmen
17th December, 2015, 10:26 AM
Reworked, newest avalible fw, software 2.10 and will be work.
how can i update my firmware same as yours? can u help me please?
Sent from my iPhone using Tapatalk
DR Race
18th February, 2018, 03:22 PM
Hi guys i tried yesterday to read one Dsg gearbox from.passat 2011 with ori CMD, reading till 100% then conect to FLASHTEC server and come up File not found in server , has somebody manage to read this file with kess eu over OBD???https://uploads.tapatalk-cdn.com/20180218/7a262f96afc1689eb8adcd06765f6e4e.jpg
Trimis de pe al meu SM-G930F folosind Tapatalk
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.