Corsa D Z12XEP KEYS

[rog3rio]

hi car is opel corsa d 1.2 2008
any know if erase all keys with opcom and put used bcm and make reset.
then program all in car with original pin from car,old remotes and key work?

[jakesman]

it should work , the immo and ecu stay the same , i change a lot of used ecu with immo and matcing to opel and use the old bcm so i can not see why it would not work other way around , give it a go just make note of the coding from the old bcm and recode the "new" one the same after reset just on some u also have to do reset on instrument , i normally reset everything and recode all

[Bllinda]

committing reset b.cm will be needed to handle the e.cu, i.pc, a.cm.

[rog3rio]

Thanks I try ,I think have a problem in my original ecu try read
Pin with carprog and say me yyyy,and have other ecu and pin is ok
,when try match pin in BCM to ecu accept ,but in ecu same erro wrong id from BCM. I try with my other ecu
Thanks

[jakesman]

ok now i ask for help lol
i have a 1.7 diesel corsa 2005 they swaped the ecu (only the ecu) i normaly use opel gold software withh the galleto 1260 cable it works good....normaly but on this one i do not get the pin for the ecu to reset it it also have a 120min security lock time , my carprog it fried so no help there , any other way to get the pin from the scrapyard ecu ?

[Bllinda]

Pin can find u.ec d.is and if there is r.ec.


committing reset b.cm will be needed to handle the e.cu, i.pc, a.cm.

[jakesman]

ecu is used one from scrap yard , took the vin number from it and asked the stealership to have pass for vin
gave to me no problem now i just have to wait out security lock time