PDA

View Full Version : Siemens SID803A BDM connection for XPROG



omglol
22nd May, 2015, 04:34 PM
Hi!

Does someone have connection diagram for SID803A? I need to read Motorola via BDM. Many thanks!

omglol
23rd May, 2015, 10:16 AM
OK, I got the wiring diagram and I have read the ECU successfully.

However, I get stuck at writing at 13%. Does anyone know why? Does anyone know if Piasini can write this ECU?

2xded
23rd May, 2015, 10:56 AM
Try to connect as

bugarcek
23rd May, 2015, 01:41 PM
Here you go.

http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=314798&stc=1

omglol
23rd May, 2015, 02:35 PM
Thank you, I found that, as I said the reading process was successful. Now I am stuck at 13% when writing ...

omglol
24th May, 2015, 09:09 PM
Just in case someone faces the same problem ... you must erase external flash (just press "Erase"), then the programming will proceed without problems.

Music73
24th May, 2015, 09:33 PM
Yeah you are right... I came up against the same situation but forgot that was what was the problem.. Also applies to Bosch, denso & visteon units when writing full dump...