PDA

View Full Version : dashboard africa twing



aprilia40
24th May, 2015, 06:55 PM
Hi friends, anyone can help me with this dashboard twing africa.

the km no progress and I need the pinout, thank you very much.http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=314918&stc=1http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=314919&stc=1sorry for my bad English.

sergei5005
25th May, 2015, 12:35 AM
Hello friend Im see this dashboard in last time. Im not have pin code,but is easy identifier the source wires. And only have an few wires. You can find on board the Ground and power source. Have 2 poweer source,one directly batery and other ignition swicht .Not remember,but verify 2 grounds pins. Polarity capacitances help you an identifier power sources. The speedometer sensor identifier is you dificulty. See board y ~~~~ize conection.

aprilia40
25th May, 2015, 09:27 AM
thanks for answering , but that no progress km ?

JanBorsheim
25th May, 2015, 10:57 AM
Hi!

If you open it up you will see it written on the PCB.

http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=314958&stc=1

And here is the user manual for Tripmaster : 314959

sergei5005
25th May, 2015, 09:13 PM
Not progress Km for speedometer sensor posible not found. Speedometer in ~~~~ogic dashboard is mechanical,but you other digital board have one hall sensor in mechanical couple. Tested hall sensor. And verifi one for one SMD resistors in the speedometer sensor input,compare print values with multimeter. One easy test is Source power on 12v,and one square signal 5vpp with signal generator for speedometer sensor input,and wait any time,the km is progress.

aprilia40
26th May, 2015, 01:32 PM
thanks,very very thanks