PDA

View Full Version : using VVDI 2.8.2


KFZ
24th May, 2015, 07:08 PM
Hi
Will you help me please ,
I have ordered chinese VVDI 2.8.2 for VAG.it works fine but when all keys lost in vag with Eeprom in dash 24c64 I got proplem how to do it ,with 24c32 in dash board there was no problem, the problem will be when the eeprom 24c64 in dashboard,,
any help,
Thank you
will you help me in procedures please
whiskeyman
24th May, 2015, 08:11 PM
think you need to state which car year etc
KFZ
24th May, 2015, 08:53 PM
think you need to state which car year etc
Hi
car skoda 2012 with diesel engine CAYC manual
Maartinj
24th May, 2015, 09:11 PM
Hi
car skoda 2012 with diesel engine CAYC manual
what is a cluster number ?
no matter engine code
KFZ
25th May, 2015, 12:27 AM
what is a cluster number ?
no matter engine code
Hi
I didnt read the cluster number .All I knew that the eeprom inside is 24c64.that is it
Regards
yugo45
25th May, 2015, 03:10 AM
2012 should not be a problem.
When you have all key lost you need to prepare eeprom with service mode. So 24c64 need to read with programer first. Prepare it with service mode , then after that is possible to read it OBD.
Once you read it with obd you need to write original eeprom back with obd .
After that you DO NOT EXIT , you stay in program and read immo block ,
When you read immo block you can add key , there will be option for it.

After all done , press reset dash .
Maartinj
25th May, 2015, 08:52 AM
Hi
I didnt read the cluster number .All I knew that the eeprom inside is 24c64.that is it
Regards

seems you also did not look on the forum to get a info
KFZ
25th May, 2015, 10:55 PM
seems you also did not look on the forum to get a info
Hi
Sorry,I have looked on some posts but I didnt found solutions, do you have some posts talking about how to solve my problem ?
Regards
Samic
26th May, 2015, 04:24 AM
Hi
Sorry,I have looked on some posts but I didnt found solutions, do you have some posts talking about how to solve my problem ?
Regards

mate,you can refer to yugo45 steps.if still cannot slove it,send your skype PM me.
yugo45
26th May, 2015, 04:25 AM
Hi
Sorry,I have looked on some posts but I didnt found solutions, do you have some posts talking about how to solve my problem ?
Regards

I just told you in post #6.
KFZ
27th May, 2015, 05:31 PM
Hi
Thank you All it fave been done and thanks for you ALL