View Full Version : DCM 3.4 Peugeot 508 DPF off
Carsoft2003
26th May, 2015, 07:52 PM
Hi friend I need to remove Fap for my car peugeot 508 with ecu delphi DCM3.4 , I have read ecu with kess2 originale via obd
Ref ecu HW: 9666375980 SW: 9666375980
Thanks in advance.
gitko
26th May, 2015, 10:10 PM
read it again is not good file
Carsoft2003
27th May, 2015, 06:37 AM
Hi the file is good I have read it via OBD2 with kess v2 originale
18mep
27th May, 2015, 07:28 AM
File not good, read again.
Carsoft2003
27th May, 2015, 08:27 AM
Hi read it again
Tes1a
27th May, 2015, 08:47 AM
no good again file must be 1MB
Carsoft2003
27th May, 2015, 09:16 AM
Format Kess V2 not 1M
Tes1a
27th May, 2015, 09:32 AM
ok if u say that but file is no good,is your ori tool slave or master?
Carsoft2003
27th May, 2015, 09:49 AM
My originale Kess V2 is slave is not master , I have try with fgtech v54 clone no read it
morgano
27th May, 2015, 10:34 AM
Slave file can only decrypt your master (officially). Ask him to clear the file for you. Or open ecu and read with fgtech v54.
Carsoft2003
27th May, 2015, 11:02 AM
I have try with my clone fgtech v54 but no ok
Carsoft2003
27th May, 2015, 12:02 PM
Slave file can only decrypt your master (officially). Ask him to clear the file for you. Or open ecu and read with fgtech v54.
Probleme solved I have send file to alientech support and send me the DPF off now the car is ok
Thanks to any one try to help me .:)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.