golf 6 nec 95320

[antibisic]

Hi want to buy this soft for smelecom does anybody tryed is it working or not?Thanks

[Tachodiag]

smelecom and smok work for sure on golf 6 with nec but only on solder points...

[antibisic]

smelecom and smok work for sure on golf 6 with nec but only on solder points...


there is not option for solder points only obd

[VendoCuadros]

Hi want to buy this soft for smelecom does anybody tryed is it working or not?Thanks

95320 is Magneti Marelli dash...

As far as i know nobody makes it by OBD2.

Enigmatool with C47 cable...

Tip:

24c32 and 24c64 have NEC processor also...but its VDO.

[antibisic]

95320 is Magneti Marelli dash...

As far as i know nobody makes it by OBD2.

Enigmatool with C47 cable...



Tip:

24c32 and 24c64 have NEC processor also...but its VDO.


It has option obd but if go wrong than need to restore flash

[chriskross]

avdi do it via obd

[autofan1965]

Its possible to do with obd2 but more faster and secure is with soldering points.

[javyb]

Smelecom can do obd as it's same dash as new beetle

[XmoDDeR]

yup yup...................

[cokolo]

avdi do it via obd
Avdi can't do also Carprog can't I try 3 different dashboard. Read old km ok write new km "ok" but odometer not change. Try to disconnect battery same thing.
Dp3 work 45-50min read-writte flash and after that dashboard look like death ☺ you must open dashboard read eprom "pin verification " and job done (1 hour approx )
From my experience ☺

[javyb]

Smelecom can do in 10 mins

[chriskross]

Avdi can't do also Carprog can't I try 3 different dashboard. Read old km ok write new km "ok" but odometer not change. Try to disconnect battery same thing.
Dp3 work 45-50min read-writte flash and after that dashboard look like death ☺ you must open dashboard read eprom "pin verification " and job done (1 hour approx )
From my experience ☺
you are right m8 it was motorolla with 95320 i made...

[antibisic]

Smelecom can do in 10 mins


I think smelecom need about 50 min like dp3,you done with smelecom?

[javyb]

I think smelecom need about 50 min like dp3,you done with smelecom?
Not anymore it don't as they bought out codebox diag which does a lot quicker

[antibisic]

Not anymore it don't as they bought out codebox diag which does a lot quicker


I think box is only for security reason not to make job more quickly and box is out not sell anymore now is little spcb

[javyb]

I think box is only for security reason not to make job more quickly and box is out not sell anymore now is little spcb
I know what I'm talking about. I supply goods for then and know what works look at your golf 6 menu you will have see I put pic for you

http://images.tapatalk-cdn.com/15/06/04/15ec81fa1e0078870d45a8dee71c6079.jpg

[antibisic]

I am talking about code box hardware not software