p206 cc after immo off dont work the a/c

[d.zio]

hello to all.i have a p206 in my garage.the client bought it before one month and brought to me because the aircondition didnt work.after a search i found that the problem was from the ecu that was immo off...if i will actuate the a/c clutch from the bsi with diagnostic the clutch works..to the engine ecu parameters i see that the a/c commnd is off..the ecu is me 7.4.4 0261207477
is there any immo off file with a/c command on?
what else can i do?

[Zmann]

That dump many people include me are looking for too.

Just thought to emulate such signal from ECU sent to BSI, possibily on one wire and and just the logic hi/lo, not tested.

[roman_auto]

Check coniguration in the ecu, you wipe out to many areas

[Zmann]

Check coniguration in the ecu, you wipe out to many areas

Tried, config is not a concern. Some CAN data was interrupted, check vehicle speed in ECU para_Driving then will see.

[darrenhyland]

Def configuration................use pp2000 to tell ecu it has a/c ................ immo off dump was probably a dump from another car and didn't have a/c..............had this problem before on several pugs.

[Zmann]

Good to look at this

http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=316503&stc=1

[d.zio]

i checked and other two immo off solutions but no ac again.....i did and config with planet ang again nothing.
i left the flash with immo off and did the eeprom virgin and configurated with planet and again nothing
i saw that the bsi is and this changed but i think this is not a problem

[youk]

hi, send me your ori file

[denisho7gr]

Did you find the solution? I have the same problem...

[GEORGE GR]

hello to all ...the file immo of flash 29 f.... and eeprom... ecu 7.4.4 we have a problem not worgin clima after immo of file.. I upgraded software but nothing [oringinal servise] the proplem is the file some gate [ffff or adff] kept closed tomorow i post some file ..i have same ecu 7.4,4 immo of but clima not worgin ,,,,,,,,not its the problem simple air or clima
many efforts serviceable nothing some idea

[gkogkolos]

Start your engine bro..or anyone else who need it ;-)

No need to cut any pin or something, no problems with the fans, temp, etc.

Just flash the files and voila. It will never lock again, immo off total.

Press Reputation +1 = Password in PM

regards

[timlesssuceess]

can i have pass please rep sent

[timlesssuceess]

pass please :-)



Start your engine bro..or anyone else who need it ;-)

No need to cut any pin or something, no problems with the fans, temp, etc.

Just flash the files and voila. It will never lock again, immo off total.

Press Reputation +1 = Password in PM

regards

[tawfeg]

passs plz

Start your engine bro..or anyone else who need it ;-)

No need to cut any pin or something, no problems with the fans, temp, etc.

Just flash the files and voila. It will never lock again, immo off total.

Press Reputation +1 = Password in PM

regards

[/QUOTE]

[ElectroRadar]

Someone who pass me the password please Gkogkolos does not answer

[leosmrt]

Start your engine bro..or anyone else who need it ;-)

No need to cut any pin or something, no problems with the fans, temp, etc.

Just flash the files and voila. It will never lock again, immo off total.

Press Reputation +1 = Password in PM

regards




hello
more than 7 days tried fix my brother car citroen c2 , we changed enguine-had 1.4 hdi diesel, bought from ebay kit for diesel car ,paid 160$ but not work
after bought the gasoline enguine 1.6 with full kit-ecu bsi bcm key wires but not work -no communication between bsi and ecu,
make immo off but car now start and drive in economy mode (Me7.4.4, m29b400 and eeprom 95160 )


I have launch, xtool, orange5, ktag, vvdi prog, cgpro, I have enought programmed for read / write files


please help me friend , please please

[d.zio]

any tested solution?
only gkogkolos file worked...
now i have car same like this but i dont have gkogkolos dump saved...and his inbox is full
thanks in advance