***** Quickly 4C/4D/46/48 Code Reader ******

[autoTkey]

Looks like it's just an CN/ND900 with batteries. But is it a clone or it's made again by Tjecu?

[Weasel3]

Would this one fit also to the new cloner? http://www.uobd2.net/wholesale/id46-decoder-box-id46-copy-box-nd900-key-programmer.html

[paul_12345]

cn900 clone cannot copy id46, this can

it is just a cn900 clone with newer firmware.

If those with a clone cn900 paid the extra ~200 usd more they would have no need for this :), although the battery option is better (although not hard to add a battery for the cn900+cloner boes)

Guess the saying is sometimes true.. buy cheap buy twice!

[ray-ray]

Gwee did you test the unit with cn1,2,3, chips is it stable? Is there any kind software that can be run with a pc? Or can it program chip via dump. Maybe you can offer and we can help post dumps with keys.

[Automat]

.......................

[ray-ray]

My source say it's a factory in China with Chinese version only for a long time,now English version. (not a clone of cn900 Tjecu)

[strat]

seen this popping up lately also.. must be full english version now as Qinuo sent me a pdf about it nearly 1yr ago telling me its coming out soon... nearly purchased it a few weeks ago but went for the CN900... battery powered for quick access is good for the portability of it... Might still grab one later just to have another tool :biggrin:

Need more info who makes it etc..

[shitad]

I have locksmith in my country who has one for 3 months now and he clone Honda 46 without using the decoder so I can't wait to see if anyone else can confirm that.

[strat]

so apart from being battery powered and cheaper anything else to buy over the CN900 ?

[shitad]

Gwee can you confirm if it clone 46 without decoder ?

[strat]

Did this come in a case which looks like the keydiy case to store it in?


Sent from my iPhone using Tapatalk

[autoTkey]

need 46 decoder

Better stick with the TS888 then. Just my opinion. But for almost the same price you can clone a lot more. Except unlocking CN2 80-bit :rofl:

[autoTkey]

Well TS888 cloned everything I have thrown at it - 4C, 4D, 46, 48 + it doesn't need cloners and has frequent updates. Much better than this Quickly clone...

[bigkey]

need 46 decoder
Hi Gwee, what sort of decoder is it? Can it use decoder from TRS5000 ? Thanks

[ray-ray]

I do not see a dc plug for wall plug power. Battery power and USB power

[paul_12345]

looks quite good but should have done a 4d/46 decoder built in option.

Also feel a bit sorry for cn900 hope they still do some development and maybe even offer a clone->original license for those that were tricked into buying the clone or those that buy this.

[totalkey]

looks quite good but should have done a 4d/46 decoder built in option.

Also feel a bit sorry for cn900 hope they still do some development and maybe even offer a clone->original license for those that were tricked into buying the clone or those that buy this.
In their website advertising show g type cloning

Sent from my ASUS_T00J using Tapatalk

[ray-ray]

I made a switch that combines the 4D & 46 together, and fit them both in one box. Now who sells the boxs at a low rate? My best price is $400.00 for both.

[totalkey]

...................no they didn't
Its was nd900 maybe

Sent from my ASUS_T00J using Tapatalk

[autoTkey]

nothing can clone g chip yet

My source promised ND/CN900 will be able to clone Toyota G ..but only said SOON. We will see in the next few months.... Said Tjecu are working on it currently. And also promised there will be no updates on the Quckly clone :girl~~~~:

About the decoder boxes - I can also confirm they are all the same no matter the color and the writings on them. Only the originals have different PCB design but work in absolutely the same way.

[ray-ray]

I have cn900 & works very good, upgrades over the years have been perfect. There web site has a lot of info. To help with you with cn900. Does the quickly cloner have a site to upgrade the unit in the future? The price on there unit is great , better if there future updates at no charge.

[autoTkey]

There will be no updates as far as I'm aware.

[strat]

Who told you this?

I don't think they would release something and not issue updates.. It's a clone of the CN900 once that gets updates in pretty sure this would also get a update.

They are targeting the CN900 potential buyer with the lower price.


Sent from my iPhone using Tapatalk

[ray-ray]

If it is a true clone of the cn900 then the pc version of cn900 will work with the quickly cloner. PC version can control the cn900 and do all the function as the stone alone unit. PC can make ready to start off dump. "G" can you look into run quickly cloner via PC running CN900 ?

[autoTkey]

Who told you this?
... Info is from my source at the Tjecu company. And I remember that other clones of the CN/ND900 were not able to update too, so it's not likely that one will receive any official updates.

[austingreen]

My source is Quickly cloner would also get a update via files, when the newest version is released, they send to the users to update. Quickly cloner is newly released tool, so they will collect users' feedback to do their best.

[austingreen]

nothing can clone g chip yet

Master Gwee, can you verify Quickly cloner can work well with CN1, 2, 3?

[ray-ray]

"G" can you confirm you can control the quickly cloner with these software?
http://www.digital-kaos.co.uk/forums/showthread.php/443242-cn900?highlight=Cn900
if you don't have the time no worries, my unit will be here on Friday. Also I have seen 2 different colors
Version red and the White I hear the White is best quality.

[ray-ray]

It would be nice for quickly cloner to develop a pc program for ready to start by dump. So we could put zed bull>> EFFI to sleep.

[autoTkey]

Finally "figured" it out about unlocking the 80 bit CN2. Sorry Gwee for arguing with you but seems I was prejudiced because my suppliers were also convincing me the 80-bit CN2 were not able to unlock. I tried with ND900 and chinese zed-bull too and it works. Only TS888 can't unlock yet.

For YS-01 it was enough to just write over the old info but with the new CN2 it's a bit different. You need to read with the PC software, remove the mark from the box which indicates the page is locked and press write. Works for page 1, 2 and 4. For page 3 you can't remove the lock but you can write over it anyway.

[cjawahir]

Finally "figured" it out about unlocking the 80 bit CN2. Sorry Gwee for arguing with you but seems I was prejudiced because my suppliers were also convincing me the 80-bit CN2 were not able to unlock. I tried with ND900 and chinese zed-bull too and it works. Only TS888 can't unlock yet.

For YS-01 it was enough to just write over the old info but with the new CN2 it's a bit different. You need to read with the PC software, remove the mark from the box which indicates the page is locked and press write. Works for page 1, 2 and 4. For page 3 you can't remove the lock but you can write over it anyway.

bro now u know that the sales person know very little about what they sell ,

engineer makes cars but they need a real driver to put that car to the test , only the word from the driver can tell u how well the car manage on the road .

click the thanks button is nice too

cj : )

[insomnia2009]

going to order one tonight seems to be ticking all boxes for me

[austingreen]

going to order one tonight seems to be ticking all boxes for me
Pls report what you can do?

[ray-ray]

I order 3 unit from uobd2.net and the remote frequency is not working does no matter where you place it. Going to test 4D/46 next.

[labase]

Hi,
I oder one pc, it is work perfectly. copy 4c/4d rapidly.
thks.

[ray-ray]

I got the remote section to work with most remote but fail on new style GMC.

[mikajna]

Hi guys, I never had ID46 cloner...did all 46 cloners, can clone all ID46 keys? Or almost?
And is there any difference in covering models between Quickly 4C/4D/46/48, ND900, CN900, TS888...etc or all can work same?

[mikajna]

Is this very hard question, or nobody have time to answer :(

[autoTkey]

Time is a relative. The ND900(CN900) and TS888 work the same for crypto transponders. I don't have Quickly in hand to confirm for it too, but there shouldn't be any differences. Usually if it clones 4D it clones like all the rest(most of the time - because there are always exceptions) and the same goes for ID46.

[godfathertre]

does anybody have a full list of transponder chips that can be used with the quickly i already know cn1 /cn2 /and cn3/ chips and 4d 64 chips any other chips that can be cloned a full list would be grateful thank you .

[HeXeN]

My Quickly for example cannot read Astra H ID46 pcf7941, and cannot detect its remote 433mhz.
Zed bull read this key fine, my other frequency tester reads also 433 ok.

[estate]

be careful reading virgin id46, it can lock them ;)

[godfathertre]

can somebody explain why reading virgin id 46 the device can lock them, and also what chip is needed for cn3 to sniff data is a tx4 chip needed and could please somebody post a

full list of chips that can be bought for the quicky programmer thank you .

[ray-ray]

Cn1=4C Cn2=4D (need decorder box) Cn3=46 (need 46 decorder box & TPX4 for sniffing) Cn4=48
Cn5=4D72"G" (need 128bit decorder box) pfc7935=41,42,43,44 (hitag) 4D60blank=60,61,62,63,65,67,68 (use for TP Production) T5=11,12,13,14,20

[ray-ray]

Good point, also don't need the 4D box if you can store the 7cd disk into your PC.

[P&D]

virgin 46 u mean 7936 blank?

so far read many, never give problem :)


He means Astra H keys ID46 with 7941 chip in Hitag2
reading them can change the config pages making them unprogramable

[estate]

What he said ^^^^ :D

[H.Wessel]

He means Astra H keys ID46 with 7941 chip in Hitag2
reading them can change the config pages making them unprogramable

You can make it again working fine with tag key tool

[kevfield]

You can make it again working fine with tag key tool

Can you explane how ??? does tag key tool have precode for astra H key 7941??? if so did you test it working??

Thanks kev

[H.Wessel]

Can you explane how ??? does tag key tool have precode for astra H key 7941??? if so did you test it working??

Thanks kev
Yes, it has pre-code. I can not be sure but if I dont remember bad I used last year once and program key fine.
Yes, astra H/corsa D remote key.
I used fvdi

Regards

[kevfield]

So u pre coded with fvdi new 7941 or a 7941 that u damaged trying to read it?

Sent from my GT-I9192 using Tapatalk

[paul_12345]

So u pre coded with fvdi new 7941 or a 7941 that u damaged trying to read it?

Sent from my GT-I9192 using Tapatalk

he means if you corrupt the remote bytes then tagtool can restore the virgin remote data of the corrupted key.

it can not program the remote coding of a new chip

[lidons]

interesting, as it can corrupt the bytes of a PCF blocked?
He was reading or attempting to clone?

[HeXeN]

The pcf7941 was already programmed to a car. I was just testing if "Quickly" can detect type of transponder.
It didn't. "no transponder" message.
Please check with yours with opel pcf7941 and tell me if detected well.

question: Cn3 needs TPX4 for sniffing - but can TPX4 be used many times after again for sniff or only once?

[ray-ray]

Tpx4 can be reuse over and over so perfect for sniffing. Also did you read my post the CN900 PC version will run and connect with the quickly cloner. (TESTED) you can also rewrite over a CN2 &CN5 using the PC version with the quickly.

[strat]

What's quickly official website?? Do they have one??


Sent from my iPhone using Tapatalk

[austingreen]

News! 4D Decoder Box for Quickly is released.
It works with Quickly to directly copy 4D Chips, and no need connect Quickly with laptop.
347560

347561

[strat]

How this new my CN900 4D box one works fine?


Sent from my iPhone using Tapatalk

[autoTkey]

I don't think there will be at all functional difference with the cloners we already have...

[HeXeN]

What is firmware number in your tool? v2.14.8.16 ? System version: 1.00
Its not updateable?
What is serial number, it starts from 05D7... and ends with ...5342 ?