View Full Version : HOW TO REPAİR DEAD FLUANCE DASH
saitinam
12th June, 2015, 10:32 AM
When I chance km in fuance with x-tool dash dead
how can ı repair this dash
http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=317776&stc=1http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=317780&stc=1http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=317777&stc=1http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=317778&stc=1http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=317779&stc=1
hacko12
12th June, 2015, 10:43 AM
Read eeprom st95160 and post hire..
n599fbm
12th June, 2015, 10:52 AM
try this,
then, inform the results
good luck !
newgeniehex
12th June, 2015, 11:18 AM
hello
if you have a backup of the flash of abs module you can repair via obd and after the dash will repaired!
regard
saitinam
12th June, 2015, 11:39 AM
ı have got buckup but ı try write dash didnt work
my backup here
317789
andy99
12th June, 2015, 11:45 AM
you can read/write this cpu with Beprog+
but you need good dump
Vitya
12th June, 2015, 11:47 AM
i have the same prblem with fluence
When I chance km in fuance with x-tool dash dead
2011 1.6i AT
cluster 250 450 043R
FLASH MB96F386R
antibisic
12th June, 2015, 12:43 PM
hello
if you have a backup of the flash of abs module you can repair via obd and after the dash will repaired!
regard
Here is dash problem not abs
Vitya
12th June, 2015, 01:06 PM
my backup file
saitinam
12th June, 2015, 04:10 PM
have sameone pin out for dis mcu with beeprog ?
Vitya
12th June, 2015, 04:36 PM
have sameone pin out for dis mcu with beeprog ?
try this pinout
Apolo29
12th June, 2015, 06:33 PM
Xtool only change km in 4 needles dashboard, not 2 needles dash
saitinam
12th June, 2015, 06:34 PM
have someone working flash?
Vitya
2nd July, 2015, 10:46 AM
Hi friend i solved my problem with dash .
But now is not correctly shows the fuel gauge.
And no fault in cluster.
How to calibrate the fuel gauge ?
Thanks
iProg-carradio
2nd July, 2015, 03:45 PM
Vitya - Vi chto bomg ??? :chuncky:
saitinam
4th July, 2015, 12:00 AM
Hi friend i solved my problem with dash .
But now is not correctly shows the fuel gauge.
And no fault in cluster.
How to calibrate the fuel gauge ?
Thanks
how to solve your problem
ı solve with clip reprog but you have got one authority
when ı try to chance km with x-tool it kill the dash again
ı cant reprog it
saitinam
20th January, 2016, 12:45 AM
???????????++++++++++
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.