Steering column lock

[sathicham]

hello

I have Virginise a Steering column lock and when I want to program it with the clip it say : condition non satisfaite .
please someone know what is problem

[sathicham]

no body have a dump hc9s12 mask 1L15Y from bsi of laguna3 with dump 24c04 of steering colum ?
thank you

[bangreno]

I think you can put FF in 24C04 , synchro is automatic.
I got a laguna set of card , BSI and ECU.
I filled FF in 24C04 of steering colum , and it worked , no needed to program.

[sathicham]

hello
I already put FF on 24c04 but it doesn't work and it say like in the picture

[sathicham]

no body has a help for me?

[boukad]

hello
all dump 2404 ff ff

[sathicham]

all dump FF doesn't work

[sathicham]

any help from laguna3 ?

[simon77]

your problem else were fff in steering lock is correct automatic sync when you pug it in. did you remove the anti tamper pin when you opened the lock if not it will be permanently in lock position and wont work
regards

[sathicham]

ff doesn't work with laguna3

[rideon]

Laguna 3 esl doesn't synk without diag,ff will not work, you need virgin dump then code with clip...

[albertros]

Hi,
ff etc def not work.
I am sure its obvious to you but have you tried copying the old eeprom contents?

I have managed a simular problem on Megane 3 but my notes are not good.

Have you any dumps from the old or replacement lock?

[sathicham]

I have the old dump but dosn't work

[rideon]

What's the problem with the car ?
Are u sure that the lock is faulty?

[albertros]

Hi,
post the dump and I,ll have a go at it for you

[sathicham]

319344

this my file

[albertros]

HI,
plug lock power in don't mount lock on column, good luck, please report back.

https://dl.dropboxusercontent.com/u/4682342/laguna3att1.bin

[sathicham]

it doesn't work also

[dell66]

Attach? est vide megane megane 2 et 3 sur le dossier d'origine identiques nouveau boulon de montage pour laguna 3