1992 buick park avenue

[totalkey]

Costumer got key but security light flashing also when ign off, how do I fix it or bypass it?
Thanks

Sent from my ASUS_T00J using Tapatalk

[ray-ray]

The black pill on the key is a resistor there only 15 value. The ignition has a orange cable with 2 white wire inside it runs from the ears to the firewall. The wire breaks check by putting key in the ignition and test the resistance down below. Remember there is a 4 minute wait after you turn the ignition for it to reset. Bypass the system by adding the resistances down below near the firewall.

[totalkey]

The black pill on the key is a resistor there only 15 value. The ignition has a orange cable with 2 white wire inside it runs from the ears to the firewall. The wire breaks check by putting key in the ignition and test the resistance down below. Remember there is a 4 minute wait after you turn the ignition for it to reset. Bypass the system by adding the resistances down below near the firewall.
Ok I will do it thanks, no bypass without adding resistors?

Sent from my ASUS_T00J using Tapatalk

[ray-ray]

Check with ohm meter the pill on the key then just solder the same value down below. Once the resistor is soldier to the firewall you have bypass the system.

[clusters]

Costumer got key but security light flashing also when ign off, how do I fix it or bypass it?
Thanks

Sent from my ASUS_T00J using Tapatalk

If it starts don't worry about it. The security light is supposed to flash with key off.

If there was a problem with that passkey system it wouldn't crank.

[totalkey]

What is mean that also when key outside ignition the security light also flashing?

Sent from my ASUS_T00J using Tapatalk