View Full Version : Dcu 102 dtc remove pls..
rapkopat
16th June, 2015, 06:03 PM
hi all friend .
i have citroen jumper 2.2 hdi 2008 car is running no anyting problem bu engine check lamb blink .
I connected the fault diagnotic device citroen lexia
p1304 dtc code have. I made the necessary actions and could not erase the fault
i need a this fault code remove in ecu. anyone can do it for me ?
i'm read xprog. thank in advance.
tunertool
16th June, 2015, 06:21 PM
System: Subsystem: P1304 - (Manufacturer Specific)
DTC Description: Exhaust Gas Recirculation (EGR) Calibration High
EGR is ok?
boukad
16th June, 2015, 06:26 PM
hello
dump virgin not dtc
rapkopat
16th June, 2015, 09:32 PM
No egr..
P1304 injector learn fault
rapkopat
16th June, 2015, 09:36 PM
İm try virgin file and decoding but not succesfully
rapkopat
17th June, 2015, 11:20 AM
Problem solved. thanks for info pm..
npepo
17th November, 2016, 11:00 AM
Problem solved. thanks for info pm..
Hi
could you please tell us how did you sort out the P1304 fault?
Thank you
IchBins
28th February, 2017, 09:58 AM
Hello friends,
I have the same problem with a jumper 2008.
We have installed 4 new injectors, no improvement.
Now we have renewed the ECU for € 1000, no improvement.
Always the same problem, P1304 injector learn fault, correction values too high.
Does anyone have a solution to this problem?
Many thanks in advance
phara0n
7th October, 2017, 10:51 AM
if any info will be fine thx
tiugrikas
7th October, 2017, 11:49 AM
try recalibrate injection pump with lexia
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.