DPF OFF PSA SID803A DOUBT

[GolfmkI]

Hello I have this car that made DPF OFF.
All seems to work ok.
I modded myself dump (trying to learn everyday ;)

Car starts and all seems ok, but have a couple of errors that customer said they arent before, so check engine ligths....

p0089 Inlet temperature sensor open circuit
pxxxx Clutch sensor, position not valid ( perhaps these could be even sensor that had left out from housing,causing ecu to read always clutch pressed/depressed).

Can Anyone with more Knowledges than me check my manual solution???
Perhaps it is not ok.


SIEMENS SID803A
5WS40264F-T
SV CMMD SID803ACEM00
SW9662272880
HW9655534080

Really thanked beforehand!!!

I Know checking a dump work could be even worst than creating a new one.

Really sorry

[tunertool]

DPF off is not correct. See attached. Pass PM

[tehnosoftex]

Hi, I have a peugeot 407 and need to make dpf off. It has sid803a, try several solutions, volta, swiftec but nothing work. Please can anyone manually remove the dpf?
Thank you

[tehnosoftex]

Can anyone help me with sid803a dpf off?
Thank you

[GolfmkI]

Hello Tunertool:

Your file works

But as with mine, check engine is on with error

P0098 INLET temperature sensor

I will try to directly delete error but do you think it is caused by a not 100% good mod??

Thanks beforehand

[morgano]

If error was not present before dpf off, then it most likely is something wrong after phisically remove filter, or wrong mod. No more options.

Another thing is if your are not sure car was clean of DTCs before you even put your screwdriver to take the ecu apart ;) Then you may start to feel your ass like Japaneese flag by a "clever" customer, that exsist, believe me.

[Bricobay]

Hello I have this car that made DPF OFF.
All seems to work ok.
I modded myself dump (trying to learn everyday ;)

Car starts and all seems ok, but have a couple of errors that customer said they arent before, so check engine ligths....

p0089 Inlet temperature sensor open circuit
pxxxx Clutch sensor, position not valid ( perhaps these could be even sensor that had left out from housing,causing ecu to read always clutch pressed/depressed).

Can Anyone with more Knowledges than me check my manual solution???
Perhaps it is not ok.


SIEMENS SID803A
5WS40264F-T
SV CMMD SID803ACEM00
SW9662272880
HW9655534080

Really thanked beforehand!!!

I Know checking a dump work could be even worst than creating a new one.

Really sorry


Hello
I cannot download your file, could you please re-upload it or send it to me? I have the same ecu and need to compare the files and see if mine is fine. Thanks!!
Have a nice day!

[kennyash1]

i wish to try and download your backups

[tugishrugish]

Yor file
You must disable dpf serbatorio in bsa with lexia