View Full Version : original file vag golf VII GTD EDC17c64
caillou
23rd June, 2015, 11:49 PM
hi
request the original file if possible this ecu
if someone can help connect would be appreciated
https://wiki.obdtuning.de/index.php?title=Datei:VAG_EDC17C64_Pin_layout.jpg (https://wiki.obdtuning.de/index.php?title=Datei:VAG_EDC17C64_Pin_layout.jpg)
http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=319476&stc=1
mastaflex
24th June, 2015, 01:08 AM
i don't think you can put another dump from same ecu number due to OTP area and protection
kospoz
24th June, 2015, 06:39 AM
The picture shows pin 43 but in the text says pin 44
Maartinj
24th June, 2015, 07:08 AM
What SW is inside ? You sticker only show a HW number which is for most 04L type engine
atomiczen
24th June, 2015, 11:47 PM
What SW is inside ? You sticker only show a HW number which is for most 04L type engine
sw 1039S57279
i'm not a magician, i read the label
caillou
25th June, 2015, 12:08 AM
hello
then what you think I should do ?
bridge pin 44 to pin 59 with 120ohm resistor ?
https://wiki.obdtuning.de/images/thumb/c/c1/VAG_EDC17C64_Pin_layout.jpg/800px-VAG_EDC17C64_Pin_layout.jpg
Maartinj
25th June, 2015, 04:49 AM
sw 1039S57279
i'm not a magician, i read the label
Read ECU via VCDS and find a genuine ODIS file.
What is a problem.
caillou
25th June, 2015, 08:05 AM
to read the ecu is necessary vcds ?
or you refier for sw?
regards
atomiczen
25th June, 2015, 08:41 AM
stay away from this ecu if you don't know what you are doing
for read use ori updated ktag and use istruction you'll find
there's some wire to connect on the pcb and some other on connectors
caillou
26th June, 2015, 09:18 AM
hello
k -tag will use the original
thanks
carmageddon
26th June, 2015, 01:29 PM
sw 1039S57279
i'm not a magician, i read the label
not magician but wrong...you can not read SW number bosch on label because SW number start always with 1 037 XXX XXX.
you can read right SW number only via obd with vcds-vagcom-vas or chiptuning tools.
atomiczen
26th June, 2015, 11:18 PM
you are right
software could be
1037541670 or 7591
CUNA engine 184hp
Maartinj
27th June, 2015, 04:50 AM
not magician but wrong...you can not read SW number bosch on label because SW number start always with 1 037 XXX XXX.
you can read right SW number only via obd with vcds-vagcom-vas or chiptuning tools.
this is what I said
caillou
27th June, 2015, 11:17 AM
Thanks chiptuner will connect tool for SW
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.