View Full Version : Ford Fiesta 2013 info read infineon
sasy90
24th June, 2015, 01:23 PM
Hi to all ,
i'va a ford fiesta VII 2013 year , with ecu airbag C1BT-14B321-CD with indice a Infineon XC2361A-72F .
I must read it for clear dump crash.
I've upa-s , but when i try to read give me a error. With upa you try 2 solution two read this infineon... with one give me this error:
-"General error"
with other give me :
?error invalid device ID:FFFFFFF?
have a solution to read this processor?
Thanks319552
LockBit
24th June, 2015, 02:20 PM
Try by carprotool programmer , work 100% correct with all infineon xc2xxx cpu
Regards
sasy90
24th June, 2015, 02:22 PM
I HAVEN'T CARPROTOOL ! i've upa-s!
LockBit
24th June, 2015, 02:26 PM
ahhh ... I see now .
Sorry but we work on carprotool and its work great with all infineon.
I dont know upa programmer.
Regards
Johnner
24th June, 2015, 02:32 PM
Try by carprotool programmer , work 100% correct with all infineon xc2xxx cpu
Regards
This wouldn't be the programmer that you SELL,would it ??
sasy90
24th June, 2015, 02:38 PM
somebody can help me ??
slick_dick
24th June, 2015, 04:34 PM
try and find some with ford ids
sasy90
24th June, 2015, 05:06 PM
I can read flash with ford ids??
anastudio1
24th June, 2015, 09:26 PM
upa not good for infinion
sasy90
25th June, 2015, 04:20 PM
upa-s not good?? i bought now to do this infineon .... ( with upa-s you can do new MAC and SPC ).... you say that upa-s not good ???
credoline
25th June, 2015, 04:28 PM
Try this: Not suplly MCU VDD trough +5V of UPA, then suplly to the modul +12V and MCU will get +5V where he is need it
sasy90
25th June, 2015, 05:05 PM
Try this: Not suplly MCU VDD trough +5V of UPA, then suplly to the modul +12V and MCU will get +5V where he is need it
i try but not work... always the same problem... "error invalid devide ID " ....
how to solve this problem?
sasy90
25th June, 2015, 06:34 PM
Thanks to all , I managed to read the micro of another ecu to study my problem and i solved. This ecu have an infineon XC2361A-56F ( number ecu is C1BT-14B321-CE ) . The file is correct ...64kb , anyone can help me to clear file?
Thanks
ALVARES
25th June, 2015, 11:25 PM
try this file
319816
sasy90
26th June, 2015, 07:31 AM
try this file
319816
this solution is tested 100%?
I don't have the car in my workshop , and I must be sure 100% to work correctly....
Thanks
ykizak
26th June, 2015, 08:49 AM
Thanks to all , I managed to read the micro of another ecu to study my problem and i solved. This ecu have an infineon XC2361A-56F ( number ecu is C1BT-14B321-CE ) . The file is correct ...64kb , anyone can help me to clear file?
Thanks
Hi here a tested solution for your module. Check PM for password.
Please note that you will have to clear DTC. That's all cheers. :single_eye:
sasy90
26th June, 2015, 09:04 AM
thanks .... this is my second ecu that my client sent me to study.... now i managed to read the infineon of this thread.... is C1BT-14B321-CD inside a infineon XC2361A-72F .... can you help me with this file? is the same car with crash .... this is the ecu ori that i must do repair... can youhelp me?
You're the best I see...
In attachment the file crash. Thanks
ykizak
26th June, 2015, 09:42 AM
thanks .... this is my second ecu that my client sent me to study.... now i managed to read the infineon of this thread.... is C1BT-14B321-CD inside a infineon XC2361A-72F .... can you help me with this file? is the same car with crash .... this is the ecu ori that i must do repair... can youhelp me?
You're the best I see...
In attachment the file crash. Thanks
Hi here your file is cleared. Check PM for pass.
Good luck my friend.
sasy90
26th June, 2015, 03:41 PM
thank's my friend workkkkkk
ykizak
26th June, 2015, 06:41 PM
Great news, glad could help. Thanks for reporting.
sasy90
1st July, 2015, 10:53 AM
With this ecu I read that infineon with upa-s with this schematic....
http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=320613&stc=1
evergreen94
4th July, 2015, 01:13 PM
Hi here a tested solution for your module. Check PM for password.
Please note that you will have to clear DTC. That's all cheers. :single_eye:
pass please
hafido1983
6th October, 2015, 12:05 AM
HI guys
i need pinout this ecu by xprog-m
thanks in advance
hafido1983
6th October, 2015, 08:07 AM
any help pleae
thank
hafido1983
6th October, 2015, 09:21 PM
any help please
centrohifi
3rd February, 2017, 09:04 AM
read and written .. Perfectly with UPA-S Ori.
:)
autocargo
10th December, 2017, 08:13 PM
Hello. I got same airbag calculator... Could someone check my one if is cleared properly? If it's not please clear it properly... Thanks.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.