Daihatsu Charade 2003 lost keys

[yusef]

Attached immo dump

Can somebody please let me know the key data to prepare a transponder, i think its a 4D 67

Thanks

[yusef]

Is this dump read ok or got error ?

[Recoder]

Hi mate i ran it thru Effi and came back as 4c (write to tpx1 or eh2).
Year 1998-2000 ???.
So dump auto id as above?..
HTH

[yusef]

Thanks Recoder

Same thing with zedBull came as 4c, programmed onto tpx1 but no good

immo 89780-b2020 tokai rika bar code DD680F37000985, understand that 2003 4d 67

Please check following if i was to manually write transponder, using DST Texas function, need more info to write and which parts of the transponder should be locked before prog keys ??

first key
password 72 52
ID AF
serial no A4 26 CD 04 (not sure about 04)
secret key dont know- any ideas ??????????

similarly second key
52
56
7B 12 B3 04 ?????
secret key dont know- any ideas ??????????

So put virgin dump , prog above keys by shorting 4 & 13, ???


any help / advice appreciated

thanks

[iamfooser]

Yes. This is 4D. Look back at my post and use the file and transponder. Lock all pages.

[Recoder]

Just a thought did you leave connected pins 4&13 connected for 30+mins with the first key you did?
Seem to remember this from somwhere ?
worth a try.

[yusef]

iamfooser couldnt find your orig file , found attached file


Used the file and transponder data, immo light goes out but not start and immo fault codes

Think key matching to dump, hence immo light off. Maybe not matching with ecu ?

Is it possible to give me key data for my original dump or modified dump to write keys ??

Thanks recoder, Tried with virgin file and short pins left ign on 30 min, immo flashing 2-3 when shorted,
after flashing 2-1. Any idease what this flash code means

thanks

[Bllinda]

Maybe keys is written differently .... do you know exactly ....



first key
password 72 52
ID AF
serial no A4 26 CD 04 (not sure about 04)
secret key dont know- any ideas ??????????

similarly second key
52
56
7B 12 B3 04 ?????
secret key dont know- any ideas ??????????


thanks

[bram380]

iamfooser couldnt find your orig file , found attached file


Used the file and transponder data, immo light goes out but not start and immo fault codes

Think key matching to dump, hence immo light off. Maybe not matching with ecu ?

Is it possible to give me key data for my original dump or modified dump to write keys ??

Thanks recoder, Tried with virgin file and short pins left ign on 30 min, immo flashing 2-3 when shorted,
after flashing 2-1. Any idease what this flash code means

thanks

This dump contain two keys but have same code for page1.
You need different code page1.

[bram380]

try this dump (if car still won't start, please post here ecu dump):

[bram380]

Attached immo dump

Can somebody please let me know the key data to prepare a transponder, i think its a 4D 67

Thanks
clear your inbox

[yusef]

Cleared inbox now, Pass Please

Ramadhan Mubarak

[yusef]

Is it possible to have key data, to prep transponder ready to start

[yusef]

Hi Bram380

Tried above file with key data sent and immo light flashes at the same rate like no key

[bram380]

I need to know last files from ecu + immo after failed.