focus edc16c34 u0118

[atomiczen]

i need help remove u0118 dtc
i have made dpf off on a ford focus 1.6 tdci with swiftec and disconnect a faulty facm additive ecu, but i have a mil with u0118 for disconnect facm ecu
could someone remove this dtc?
319933

[blazej1200]

1C6E8D change in address to 00

[atomiczen]

1C6E8D change in address to 00
thanks blazej, your info is good, but i found the real problem in other dtc
car have from the beginning a p1187 wrong variant that i clear, but make mil lamp on also with dtc disabled

[insomnia2009]

i thought its not possible too turn of ucode its communication code from engine ecu to other modules

[morgano]

Guess to solve P1187 you need to load again good calibration files with VCM and IDS, then make DPF off via BDM. Or if you have BDM backup before the P1187 would be good too.

I faced that one time and only way was take car to original state by bdm and then make dpf off on bdm file. Doing it OBD decalibrated eeprom and P1187 appeared.

[atomiczen]

Guess to solve P1187 you need to load again good calibration files with VCM and IDS, then make DPF off via BDM. Or if you have BDM backup before the P1187 would be good too.

I faced that one time and only way was take car to original state by bdm and then make dpf off on bdm file. Doing it OBD decalibrated eeprom and P1187 appeared.

definitely a eeprom problem, i don't have bdm backup, beacuse car still have this error the first time i saw the car
i have a flash backup of same ecu from another car and flash is the same, only different vin, so problem is on eeprom for sure
i read that could be solved also with an injectors recoding, or for sure with a software upgrade from Ford dealer.

[pinotec]

This problem is easily solved

[Hondata]

Hi guys and for this software 1037395209 does anybody have a solution same DCT U0118 ???
Thanks in advance