View Full Version : Volvo Chks error
chriskross
1st July, 2015, 08:13 PM
Hello!
as i hear in Volvo is always Problem that after making a remap in DTC will come CHEKSUM error.
i had this this error in Siemens SID 803 ecu, will this fault also come in Bosch EDC16 after remapping??
thanks
mislav88
1st July, 2015, 08:34 PM
yes it will, problem is that ecu checksum is stored also in CEM, and if they dont match you get this error.
darius89
1st July, 2015, 09:27 PM
So, nothing possible to do?
mislav88
1st July, 2015, 09:43 PM
not sure, never went deeper into it, you would need to modify ECU checksum stored in CEM but dont know is it possible
i just say to my customers deal with it or drive away
taurius
1st July, 2015, 10:01 PM
Or you can simply delete the error in the ecu flash :)
CEM will still store an error, but at least the ECU wont show anything.
So far I have seen it in all volvo ecus - sid803, sid803a, edc16c34 and edc16c31
GolfmkI
2nd July, 2015, 09:26 PM
If you want you could match again Ecu .
Post here dump from Bcu inside( MCU 9S12 I THINK) and Ecu dump(SIMPLE EEPROM.
Ill make match for you.
chriskross
3rd July, 2015, 11:54 AM
If you want you could match again Ecu .
Post here dump from Bcu inside( MCU 9S12 I THINK) and Ecu dump(SIMPLE EEPROM.
Ill make match for you.
this will sync the chksum in cem with ecm? the codecard tool?
as i hear the only person who can calc checks in cem is the polstar racing team.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.