View Full Version : VW Crafter edc17c54 speed limit
gitko
1st July, 2015, 08:48 PM
hi to all
can someone help me and remove speed limit on this crafter now is on 92 km/h
Can we do on 120km/h
thanks in advance
teerak2uk
1st July, 2015, 08:52 PM
Use vcds also check maybe aftermarket limiter install on throttle body or pedal
gitko
1st July, 2015, 10:01 PM
I check but can only set lower speed
insomnia2009
2nd July, 2015, 12:59 PM
speed limiter off
icezero2010
2nd July, 2015, 03:05 PM
hi to all
can someone help me and remove speed limit on this crafter now is on 92 km/h
Can we do on 120km/h
thanks in advance
c17cc set to 0
gitko
2nd July, 2015, 08:46 PM
thanks to all but with this file car raise more then 130km\h.
I set also and several addresses down for max speed but without resultant and on address F9504
Without success only vmax is out not set
icezero2010
2nd July, 2015, 11:40 PM
thanks to all but with this file car raise more then 130km\h.
I set also and several addresses down for max speed but without resultant and on address F9504
Without success only vmax is out not set
you can test
C1804,c1806,c1808 set to 12000 dezimal
and set c17cc set to 0
gitko
3rd July, 2015, 07:19 AM
you can test
C1804,c1806,c1808 set to 12000 dezimal
and set c17cc set to 0
I set it this but without resultant
chli1976
3rd July, 2015, 01:54 PM
Set C17F6 and C17F8 to you speed limit wish.
Please post result
Is it not possible to set speed limit with VCDS ?
Pzolee
14th September, 2015, 08:01 AM
Hello boys.
What 100% working solution crfter speed limit? oR MODIFY or Off :)
furburger
26th February, 2016, 01:27 PM
you can test
C1804,c1806,c1808 set to 12000 dezimal
and set c17cc set to 0
Attached from a CTKB 109ps
icezero2010
26th February, 2016, 04:03 PM
Attached from a CTKB 109ps
2c1354 to 0
furburger
26th February, 2016, 04:59 PM
2c1354 to 0
I tried that & it didn't work....hence why I posted here... I didn't road test it though... I just used cruise control stalk to set limit before driving.. & limit of 58mph still showed as maximum selectable speed ... on Sprinter you can use the Cruise Control stalk to test limiter removal job without having to road test..
I assumed its the same on Crafter ?
icezero2010
26th February, 2016, 05:35 PM
I tried that & it didn't work....hence why I posted here... I didn't road test it though... I just used cruise control stalk to set limit before driving.. & limit of 58mph still showed as maximum selectable speed ... on Sprinter you can use the Cruise Control stalk to test limiter removal job without having to road test..
I assumed its the same on Crafter ?
this is another think max speedlimiter on cruisecontrol its a seperate value .
the speedlimiter must be off
furburger
26th February, 2016, 07:07 PM
Ok..thanks , if i get another one in I'll road test it before declaring it a fail ;)
Do you know what TROT version is used for that soft version / ecu?
Sent from my SM-G900F using Tapatalk
icezero2010
28th February, 2016, 11:12 AM
i?m not 100 % sure but i think it is tp v10 all files i have this tp if you read the ecu in boot you can search for tprot in 8 bit text
Moldovan1
12th March, 2018, 10:27 PM
Today i rise speed limiter (set by user, not by law) with VCDS 17.1.3 from 120 to 160 on EDC17c54, 2012 (UDS). All work fine!
abv007
25th May, 2019, 11:02 AM
Hi!
Please, remove speed limiter...
Ori dump in attach...
Thanks...
named
26th June, 2019, 08:29 AM
i'd like to rise speed limiter from 90 to 130 on EDC17c54 (set by user)
have you tested solution? plz help me
Kayhan 17#
8th September, 2019, 07:44 PM
you can test
C1804,c1806,c1808 set to 12000 dezimal
and set c17cc set to 0
doesnt work for me, car doesnt start =(
icezero2010
9th September, 2019, 12:01 PM
doesnt work for me, car doesnt start =(
hace u exactly same file ?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.