chevy malibu 2010

[hani key]

hi to all i want to know lcation of odo in chevy malibu 2010 this is bcm of car and cant open i want info of location |

many thx :)

[neospeedo]

On the other side (opposite side seen from your picture), you'll see two holes. You have to drill the metal rivets off. Inside you should find a 95xxx chip in there. I would suggest removing from board to be safe. If you need any further help, post your dump.

[qubits]

Or you can cut a 2" square right below the plastic mold marking >PA66-GF13<
A grinder will cut this fast!