PEUGEOT 207 2011 BSI CHANGE

[holbi1]

Costumer change BSI ,cause car don't have airco so everything must be diferent,
The question is how to program remote control ? that we have only one mechanical key just to open by hand.

What do I need pin? ,If I buy new key or used must be precoded

I got non experience with this example and I will Appreciate it if someone can enlightened my brain. MVP or Lexia can do it ?

[roman_auto]

You need pincode, and new remote and them from pps code the key and in the and learn the key.

[didi_du_93000]

Firstly.
Have you got original key from second hand BSI?
If yes: best choice is open BSI and read pin, write this pin in ecu. Job done

If no: open bsi and change pin with the same pin than your car. After you MUST learn new keys. Joe done
Remote key for this car is 15$ on China website.

With Tapatalk

[obdsystems]

i dont advise you to use china keys tho -
better job to pay for originals

I've done older BSI by transfering eeprom accros to new unit.
then go into AVDI or plannet and program pin & then finially keys as some info store on main cpu eeprom.

[holbi1]

What If I try to read it PIN with Mvp on 26 juli Advanced Diagnostic will make update on this car .I got old keys with remote can I program it to the new bsi ? or must be new one? .Because I am afraid to read on table 9s12 one time x prog m kill motorolla .Do I can turst r 270 for future friend? or buy smok programmer.Thanks for replay

[didi_du_93000]

Firstly: This bsi have eeprom inside and not mcu moto.

Best choice is Virgin bsi and learn it using pp2000 or diagbox.

You must know the pin of the car.
(Read it from old bsi or from ecu, or ask Peugeot garage).


Good luck friend


With Tapatalk