help convert xprog pinouts to upa pinout

[stalonerambo]

xprog pinouts (gnd = what on upa), xprog( b0= what on upa0), xprog(b2= what on upa), xprog(b3=what on upa),xprog(b4=what on upa)., xprog(b5=what on upa), xprog (b5=what on upa) , xprog(b6=what on upa),xprog(b7=what on upa)., xprog(vcc=what on upa). xprog (vpp=what on upa), thanks guys,

[autodigitec]

Not compatible like that.. the only fixed pins are probably gnd and vcc/vdd.

[stalonerambo]

i found something, can you check for me if i am right, i can send for your email,if you want

[stalonerambo]

Not compatible like that.. the only fixed pins are probably gnd and vcc/vdd. here what i found, check for me please, (xprog vppr= upa irq), (xprog vcc= upa vdd),(xprog b6=upa pc2),(xprog b2= upa pb1), (b7=upa pin 4),(b5=upa reset),(b3=upa pbo), (b1= upa pc3),(gnd= upa vss), first is xprog name and second is upa prog m,,,,

[PierreTheron]

M8

you will need to learn to use datasheets .. Wait till you need to go to rotated pins on these ..

sometimes on airbag units you will find rotaded pin ic'''''s and you will make a living for you if you solve it as no one else can do them ....