kawasaki ZX6R

[kevfield]

Hi all can anyone check this file see if tango added key right
i have a none starter , by looking at the dump looks like key 1 is added correct
but bike still not start !!

could be fault on bike .....

page 1 FF
page 2 05
page 3 35 82 44 17

kawasaki zx6r 2006

93c66


Thanks kev

[Fallen]

Try and add it to position 2, i had a similar problem.

[oeyek]

Hi guys

I have a ZX600P
I believe it's the same as ZX6P or ZX6R

ECU 21175-0109
No transponder, but with key.

I used the file "Ecu denso 21175-0109 112100-5260 12v 93c66x16.rar" from the previous thread in 2011. I made the 3 keys with tango using 4D62 chips.

I read the chips in a cloner, it says Chip 6A (Kawasaki Bikes)

After I put back the chip in the ECU still not working.

I then rewrite the file in a NEW 93C66, put back into the ECU, still not working.

I try to virgin the file or immo-off the file, using Universal IMMO decoding 3.2, still not working.

Any insights will help! Thanks a lot!

[HeXeN]

Do you have picture where tu cut a hole?