FVDI EWS 3 Reading

[garabounga]

Hallo Guys,

I have a FVDI wich have done every thing i asked so far ,only one thing i dont understand i had een issue with ews 3 bmw X5 i could read the data of the ews no problem i wil post here what i could read so yo can check guys if its ok . i wanted to write the same data to ews it stays like 10 minutes in working then i disconnect maybe i had to wait more ?!!

i uploaded the same file to keyproduction keytag to make an a 7935 transponder it keeps saying file is not the right size?!!!!!!!!!!!!!!!!

did some one had this problem before?

[garabounga]

No one? 40 vieuws so far

[gentiabazi]

You need to reas ews with external programmer like AK90, xprog....

[xtech]

I try make key from EWS 2 dump with Tagtool and dont working error transponder writing ,EFfi working but is key number problem ,zedbul is good working.

[garabounga]

Ahh ok i wul try with xprog about de zedbull can i do it with zedbull mini ?

[PierreTheron]

ZEDbull mini is same ... S o yes

[garabounga]

Thanx guys for the ansewrs im gone do the following try to read with xprog with adapter if 046j upload file to fvdi and try otherwise i will try to do it with zedbull wil let u khnow :)

[AUTODIAGNOZA]

Does matter what type of pcf7935 is used to write for bmw? I have 5 blank transponders pcf7935 and when i read it with zed mini, i get "mit volvo etc...". I can't write dump from ews to any chip.

[garabounga]

Does matter what type of pcf7935 is used to write for bmw? I have 5 blank transponders pcf7935 and when i read it with zed mini, i get "mit volvo etc...". I can't write dump from ews to any chip.

did you prepared the chip?

[xtech]

for zedbul ,effi ...no need prepared and you can clire used pcf7935

[garabounga]

Hallo guys i pulled the ews uit and read ews with xprog went very smooth and fast i uploaded the file to fvdi keytag and this tjme he accepted the file wich was a nice surprise fvdi asks if i want to program elm or 7935 i deed had 7935 some where but i couldnt find it tomorow i go to the locksmith and get one and try to program i hope it works :)i let you khnow the outcome .....

[AUTODIAGNOZA]

How to clear an used pcf7935?

[garabounga]

hallo hier is my feedback i get a pcf7935 and i wanted to make key the keytag keep popping up cant write session do you khnow what does it mean ?
thanx gays

[xtech]

How to clear an used pcf7935?
Effi -PCF7935-clear

[xtech]

Hallo guys i pulled the ews uit and read ews with xprog went very smooth and fast i uploaded the file to fvdi keytag and this tjme he accepted the file wich was a nice surprise fvdi asks if i want to program elm or 7935 i deed had 7935 some where but i couldnt find it tomorow i go to the locksmith and get one and try to program i hope it works :)i let you khnow the outcome .....
My FVDI tag accepted file too but error writhe problem

[garabounga]

Any solution xtech?

[garabounga]

If some body has a wotking solution it wil be nice so far i could only read and write 4c and read 4d toyota , some DK members said you have to chanche the capacitor in coil and some say in the tag module it self itis really a usefull tool if some one can share his/her experince with it wil be great thank to all

[xtech]

i think FVDI is not good cracking and is software problem : this transponder is good reading and writing as preparing but writing new key is not working ,use zedbul program

[garabounga]

Ok i just orferd zedbull 508 wil it be ok?

[xtech]

first try with FVDI maby your clon is beter then my .Zedbul 508 is ok for this job

[garabounga]

Ok thanx xtech i wil try

[garabounga]

thanx xtech itis all ok the car started perfect :)