PDA

View Full Version : EDC16C34 Galletto v54 & Error SilentKeyLettura



svvag2000
25th July, 2015, 12:15 PM
Today i try to read an Citroen C5 1.6HDI without success.I could only get ID.

After that when i try to read get this
READING ECU
Start reading...error SK1
Error SilentKeyLettura

323931



Do you have any idea?the ecu is old and i dont think have tprot so do you think the problem is hardware or there is any solution?

CustomCars
25th July, 2015, 12:27 PM
Thats is security access problem, ecu possible is locked. But for confirm that needed check better tool
1.6HDi no problem to read via OBD.

Or better idea BDM!

svvag2000
25th July, 2015, 12:43 PM
...earlier ECU device read and wrote.

BDM works, but it would be desirable to understand why the Galletto doesn't work.

morgano
25th July, 2015, 01:06 PM
Maybe ecu already tuned :(

svvag2000
25th July, 2015, 01:09 PM
what does it mean?

...there is a restriction on number of programming???

morgano
25th July, 2015, 01:11 PM
It is possible someone "tuned" the ecu before you and protected it changing the SK

svvag2000
25th July, 2015, 01:16 PM
...and what to do?
how to remove protection?

morgano
25th July, 2015, 01:18 PM
Upload fresh original via bdm


Regards,

svvag2000
25th July, 2015, 03:16 PM
...ori upload via BDM, no result.

I suspect that a problem in Galletto.

morgano
25th July, 2015, 04:39 PM
Mpps or other tools read it obd with no problem?


Regards,

pulsar2000
25th July, 2015, 06:08 PM
sure you dont need this ?
http://www.dhgate.com/store/product/s-1279-module-of-pps2000-lexia-3-citroen/169521028.html#sb1-20-1b|657757480
remember trouble reading a nemo once, and used a interface and read all ok

Babos
26th July, 2015, 07:47 AM
sure you dont need this ?
http://www.dhgate.com/store/product/s-1279-module-of-pps2000-lexia-3-citroen/169521028.html#sb1-20-1b|657757480
remember trouble reading a nemo once, and used a interface and read all ok

Mate that is for Bepper and Boxer adapter.
Do you try use driver from EDC16c3?
I do lot PSA cars via OBD and use FGtech2 and all be fine.
From my experience: i get Opel vivaro 1.9dci 2006 year car owner want tuning.
I conect fgtech2 and get id all ok when i try to read i get problem software close or something like this.
I think problem is car temperature she must be less 50C for remap in that car.
I that day be very heat and we wait 3 houers, but car cant remap and car owner take car and go a way.
He come back after few day and i try again and car temperature be 30c but still cant read flash i use drivers from Opel/Renault(EDC16xxx) but not work.
After i take out ecu and start do via BDM i conectc ecu with BDM100 and cant conecting with ecu!!! I check all conections all wires and feeding all ok i take fgtech2 conect to ecu same result!!!
Do you know what i see after? :D
I look to procesor and see that is INFINEON..... he he he, that be old ecu in 2006 year car EDC15xxx.