clio II uch cloning

[ecumix]

Hello i need cloning uch n2 clio 2 2004 year

When i read and write 93c56 to secondhand module car start with all configuration ?

[topclef]

yes , if original is the same N2
you can write 93C66 all will be ok

[ecumix]

ok thank my friend

[xpto]

if they have the same components inside you can just swap the eprom

[dadal]

Hi Mates
I have same UCH but part numbers are different , ori uch from clio 1.6 benzin, donor from clio 1.5 dci
I want to all data of ori uch complete kopie to donor ( not only key data/eprom )..
how to do this ???

[Cr4nky]

Just transfer data from eeprom. Will be fine as long as new module is same n number or newer.

[dadal]

Just transfer data from eeprom. Will be fine as long as new module is same n number or newer.
thanks mate,
both UCH's have different numbers,,( both are N2 ) . I want to transfer all data, I think I need to swap MCU+eprom
someone has done this jop in the past ??? can give more info pls ??

[ludabrown]

Just eeprom is fine. I have done many.

[Cr4nky]

thanks mate,
both UCH's have different numbers,,( both are N2 ) . I want to transfer all data, I think I need to swap MCU+eprom
someone has done this jop in the past ??? can give more info pls ??Why do you want to swap mcu? Pointless. All key data, vin, and coding is in eeprom. Partnumber doesn't matter. If original is n2 you can use n2 or n3 no problems. If original is n3, you can't use n2 because lights wont work properly, even if you change it to n2 in the coding.

[omarino]

Hi
I confirme, swap just eeprom and the car will star.
BTW, befor swapping save your original data in your laptop
Regards


Envoyé de mon iPhone en utilisant Tapatalk

[toximatic]

Only eeprom is needed to swap to start the car .. for sure .. post result

[dadal]

Thanks Mates,
I do know for immo eprom is enough, donor uch is from 1.5 dci,,
I have checked diagram , I thought an relay be controlled by UCH ( diesel injection ECU supply (983)or injection locking relay )...That is why I wanted to all ori data swap to donor UCH ( because ori car dont have diesel injection,,it is gasoline).. and to be sure all functions will works like original ( lights in out side, door, windows, ,,,,)
car is far a way, I will swap first eprom,,and see what happend :)
thanks for interest

[dadal]

I confirm uch N3 does work ,, N2 is replaced by N3,,just swap eprom
Thanks All Mates for support