Ford Fiesta FoMoCo 8v51-14b321-bg DDJ8A airbag clear needed

[S54B32]

Hello members,

I have a Ford Fiesta with airbag module FoMoCo_8v51-14b321-bg-DDJ8A and have tried to clear the crah data with ECUVonix and tried to clear it with a cleared solution from someone here but didn't succeed to clear the error.

The following 3 error codes are stored and not erasable


================================================== ===============================
Code Description
================================================== ===============================
U3000-42 Unknown fault code
8A
---------------------------------------------------------------------------------
U3000-47 Unknown fault code
8A
---------------------------------------------------------------------------------
U3000-53 Unknown fault code
8A
================================================== ===============================

Can anybody be of assistance to help me?


324191

[FxShaw]

Those are not crash codes...you will most likely need a new module.

[S54B32]

I Will put back original file and see if the same are stored.


Sent from my iPhone using Tapatalk

[vlaki electric]

try this and if not working change the modul... 324228

[S54B32]

Thank you both for your replies.
@vlaki, I adjusted the file just as you posted!

I loaded back the original content of the E2P and I get one error code


================================================== ===============================
Code Description
================================================== ===============================
B1193-00 Unknown fault code
8A
---------------------------------------------------------------------------------

Which means the crash data is stored and not erasable.
I did not mention, but I had issues connecting the serial eprom to my programmer, it would check the pin states and sometimes not all pins were connected. I will try a new 95320 and report back to you!

Thanks so far.

[S54B32]

Bought a new SEPROM and loaded the file from Vlaki and no error codes anymore!

Thank you!