View Full Version : Need Help with my MPPS software and Kess V2 chinese master
ScotiaKris
27th July, 2015, 10:41 PM
I have purchased Kess V2 master and uploaded software and not updated but wont lift a read off a 2006 saab 93 1.9 tid 120bhp
I also have MPPS V13.02 which software is only doing a 37.0kb reading from the car
Can anyone help ?
teamtuner
27th July, 2015, 10:50 PM
what ecu mate?
ScotiaKris
27th July, 2015, 10:52 PM
Bosch one its 6c9
mbtun
27th July, 2015, 10:56 PM
if mpps read only 37kb file from edc16c9 you have a NOREAD file in the ecu (already modified)
there is a NOREAD patch for mppsv12 floating around the net, that's what you need.
ScotiaKris
27th July, 2015, 10:58 PM
Where could i find this patch ? and would it work on my MPPS V13.02 ?
mbtun
27th July, 2015, 11:01 PM
google for "MppsV12_NOREAD_Bypass_NOHW"
ScotiaKris
27th July, 2015, 11:04 PM
could only find one result and page is down
mbtun
27th July, 2015, 11:10 PM
http://www.filedropper.com/mppsv12noreadbypassnohw
see the link above ...
ScotiaKris
27th July, 2015, 11:36 PM
Getting a "ini file error" once downloaded
bobolin4o
28th July, 2015, 06:27 AM
Getting a "ini file error" once downloaded
Put that file in the MPPS directory and then use it...
ominimicu
28th July, 2015, 11:25 AM
still i wouldnt flash taht ecu with mpps...
warrio67
28th July, 2015, 01:41 PM
read it BDM
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.