MED17/EDC17 adaptation with AVDI

[NogaroB5S4]

Genuine AVDI users.. Has anyone successfully adapted (transfer immo data) 2nd hand EDC17/MED17 ECU with AVDI by OBD2? I have the Bootmode option, which works great. I was wondering if also possible by OBD2 and what the limitations were. I'm considering the OBD2 option so I don't have to open the ECU, but wondering what the success rate is and if waste of $. Thank you for any advice you can provide.

[autofan1965]

When you already own old data then it should be possible. In my opinion better spend less and have same/better equipment. Or you need spend additional 500eur for reading it.

[NogaroB5S4]

Was just wondering if it worked.. sometimes there is a benefit to not opening the ECU for boot mode read/write (void dealer warranty, etc).

[chriskross]

You mean to read cs pin etc, yes ist working fine. But you need to connect direct to ecu not obd. If you have immo data you can adapt via obd if the pc is the same.

[autofan1965]

I cant tell you about avdi but for sure same procedure work in smok uhds and same activation contain reading data without opening ecu. Whole immo package from smok is cheaper as an053 from avdi and work fully offline.

[Weasel3]

I cant tell you about avdi but for sure same procedure work in smok uhds and same activation contain reading data without opening ecu. Whole immo package from smok is cheaper as an053 from avdi and work fully offline.

OBD universal pinout - To 01- ECU working on the bench?

[NogaroB5S4]

You mean to read cs pin etc, yes ist working fine. But you need to connect direct to ecu not obd. If you have immo data you can adapt via obd if the pc is the same.

I have AN053 (ImmoV adaptation) and AN54 (MED17/EDC17 Read/Write Boot mode), but can't test/use AN053 for ECU because I don't have AN048 (MED17/EDC17 by OBD2). This is why I'm asking, because if immo data adaptation works by OBD2 (in car or even on bench via direct CANpowertrain connection), then it makes things a bit easier to adapt second hand ECU without opening (which voids warranty and risks ECU damage).

[NogaroB5S4]

I cant tell you about avdi but for sure same procedure work in smok uhds and same activation contain reading data without opening ecu. Whole immo package from smok is cheaper as an053 from avdi and work fully offline.

I also have Smok UHDS, but did not know SMOK offered VAG MED17/EDC17 options.

[autofan1965]

OBD universal pinout - To 01- ECU working on the bench?

Adaptation must be made with immo/cluster connected and can be made on car. Read need be made with bypass of gateway. Smok already have new option in test stage but it should be available for all soon.

[NogaroB5S4]

Adaptation must be made with immo/cluster connected and can be made on car. Read need be made with bypass of gateway. Smok already have new option in test stage but it should be available for all soon.

I checked SMOK reseller website, but don't see options for VAG ECU.. See other ECU versions for other brands, but nothing on VAG. Maybe I'll contact Grzegorz (developer) directly to inquire. Curious why I was not aware of Smok UHDS ECU options for VAG if they in fact exist.

[Weasel3]

I checked SMOK reseller website, but don't see options for VAG ECU.. See other ECU versions for other brands, but nothing on VAG. Maybe I'll contact Grzegorz (developer) directly to inquire. Curious why I was not aware of Smok UHDS ECU options for VAG if they in fact exist.

It used to have CAN EDC15/16 earlier.
Something extra is on its way.
It is very new. Not official yet. Plug your tool in the computer. Don't need to connect to vehicle. It asks for update. And you will see some new nice options. Your gone smile when you see them.

[NogaroB5S4]

It used to have CAN EDC15/16 earlier.
Something extra is on its way.
It is very new. Not official yet. Plug your tool in the computer. Don't need to connect to vehicle. It asks for update. And you will see some new nice options. Your gone smile when you see them.

I'm smiling already :) Haven't connected UHDS in a while.

[joemajdalani]

Genuine AVDI users.. Has anyone successfully adapted (transfer immo data) 2nd hand EDC17/MED17 ECU with AVDI by OBD2? I have the Bootmode option, which works great. I was wondering if also possible by OBD2 and what the limitations were. I'm considering the OBD2 option so I don't have to open the ECU, but wondering what the success rate is and if waste of $. Thank you for any advice you can provide.

Immo. parts adaptation works 100% via OBD,personally done many

[autofan1965]

Why chriskross is banned?

[masterb]

why you all smiling now ? can to smok edc17 mileage ... ?

[sunlocksmith]

can some one make a video of this med17 .5.6 i have a 2013 jetta key is learned but i mistake damage the ecu can i get a used ecu and with the immo can i ad a us ecu? data an car will star ? how about maching vin number to a use ecu please helps thanks im having a crazy weeks everynthing is a mess

[NogaroB5S4]

You can only clone/edit/update immo data in donor ECU with Boot mode. I don't think its possible via OBD2 on 2013 with TProt (only by dealer). How did you damage the original ECU?

[sunlocksmith]

Ok some i gess boot cable touch ground. pop some i heald it. Bu w else is in the ecu i have k tag can you help with r diagram do i have to code abs yo ecu? I have immo data

Sent from my LGMS345 using Tapatalk

[sunlocksmith]

sorry for late reply but this VW DEALER they charge 3,500.us they say they will be able to program a us ecu bu they change story once the car was there can't trust this dealer they say yes bring the used ecu then no we only use new id so new ecu new cluster 3,500 us

[LuisSabi21]

HI,fvdi fr EDC17cp20 by Obd2 does it, i try but show ERROR: Power class not find. someone to solved it. thankyou.