RANGE ROVER MSA11 IMMO OFF

[makura]

Hallo
I need a tested solution to the 1998 range rover p38 diesel with bosch ecu 0281001272.Which eeprom should be read,the one facing the ribbon cable or facing away from the cable?which wire do i cut after?any 1 with a good pair of eeproms,mine just read FF right through on both of them.
Regards

[autodigitec]

I'm exactly trying to sort immo off in the same ecu. About to go test all the solutions I can find in the next hours.
By the way, my ECU has smd eeproms.

[makura]

Pain in the wrong places for sure

[autodigitec]

The car I have here with original eeprom data is working, but only cranks if I unlock the vehicle with the remote. Or else it says in the dashboard, something like "Unlock with remote. Motor inhibited.".

I tried with both eeproms removed and unplugged key coil and it still only works after I unlock with remote.

I'm wondering if I need to cut any pin that is inhibiting the motor.

[autodigitec]

Bump, I'll pay for tested solution of immo off in this car if necessary.

[makura]

I got mine running by removing the eeprom facing the ribbon cables,started without it.

[autodigitec]

Are your remotes working?

I haven't opened the key to see if it has transponder or only a pcb.

[makura]

lost key so no remote just a ordinary key im using

[totalkey]

I did one last week , just remove eeprom, if you don't have remote you Need to bypass starter

Sent from my VOYAGER2 DG310 using Tapatalk

[PCF]

hello friends pls i have same ecu what eprom i have to remove there is 2 eproms facing the ribbon cable
thanks in advance

[PCF]

attached the photo of the ecu help pls

[atomiczen]

attached the photo of the ecu help pls
eeprom near yellow capacitor

[baltazar3]

Hallo
I need a tested solution to the 1998 range rover p38 diesel with bosch ecu 0281001272.Which eeprom should be read,the one facing the ribbon cable or facing away from the cable?which wire do i cut after?any 1 with a good pair of eeproms,mine just read FF right through on both of them.
Regards
Here is solution with instructions..not same number but should work....pm

[avid1980]

hi friend,thanks password?

[borracci]

Here is solution with instructions..not same number but should work....pm
hi friend, pass please, thanks....

[nikolov123]

hi pass from post 13 if possible thx

[tomcatrr]

Here is solution with instructions..not same number but should work....pm

Password please @baltazar3

Thank you

[bezdakou]

please resend me with pass....i can't download.

[Brunokeyman]

Hello. i need pass please

[carsandkeys]

Here is solution with instructions..not same number but should work....pm
pass please

[Spiki666]

Program both EEPROM 93C46

remove immo box
hotwire black and yellow wire on immo box connector

[Prisk]

Hi, is possible have password?
Thanks

[rafal]

Hi, is possible have password?
Thanks

post him pm and don't ask here like little boy