PDA

View Full Version : Torque limiter SID 803



linu
1st August, 2015, 06:35 PM
Please I need let the torque limiter address in my car
peugeot 407 hdi 136 hp
ecu Siemens sid 803 324937

Nio
1st August, 2015, 10:25 PM
Trq limiter - 4CDFE

mbtun
1st August, 2015, 11:29 PM
raising the torque limiter will give you almost nothing. there are many others limiters and maps to modify for a decent tuning.

carmageddon
2nd August, 2015, 09:22 AM
the torque limiter are not never only one map but one complete strategy!

4cdfe, 5cbe4, 6213e, 62336, 6253e, 6256e, 6276e, 6277e, 62806,

boomeer
2nd August, 2015, 06:21 PM
raising the torque limiter will give you almost nothing. there are many others limiters and maps to modify for a decent tuning.
I think it's not for tuning his delete error but have limp. ....

Nio
2nd August, 2015, 10:24 PM
I'm courious, can you say us how did you change this strategy? Thanks in advance.

boomeer
2nd August, 2015, 10:37 PM
We don't know exactly for what topic star won't increase limp mode. If we know ..... we have key

Nio
2nd August, 2015, 10:45 PM
6276E - DIAG_EGR_CTL: maximum threshold for activation of EGR-control diagnosis (8x1)6256E - DIAG_EGR_CTL: minimum threshold for activation of EGR-control diagnosis (8x1)



Is this Torque limiter ? I never heard that but maybe i'm wrong... Thanks in advance.

boomeer
2nd August, 2015, 11:35 PM
Why you think that his have limited by egr?

mbtun
3rd August, 2015, 01:15 AM
This is going seriously off topic. The man did not requested for TL limp ... or EGR info, and btw DIAG_EGR_CTL does't mean torque limiter. It's the minimum and maximum value for EGR activation. Out of this range will not work ... Think about it like the area between 2 functions ... F(x) and F(y)

carmageddon
3rd August, 2015, 06:57 AM
6276E - DIAG_EGR_CTL: maximum threshold for activation of EGR-control diagnosis (8x1)6256E - DIAG_EGR_CTL: minimum threshold for activation of EGR-control diagnosis (8x1)



Is this Torque limiter ? I never heard that but maybe i'm wrong... Thanks in advance.

i m wrong because i did the research with conversion value, this 2 controls are not for torque

Nio
3rd August, 2015, 10:37 PM
Problem solved... carmagedon was wrong for that 2 adress. For the rest i think he was correct. Good work. Peace and Love.

Nio
3rd August, 2015, 10:41 PM
i know was out off topic mbtun. It was just to be clear about torque limiter adress. I think we are professionals and adult persons, so if we explain a mistake will not be damage for anyone. Have a good day.