Audi A4 1.8T 163 PS -2005 tuning via OBD?

[beti88]

Hi dk members

Does somebody know if you can read/write through OBD?
The tools I have is MPPS 13.02 and FGTech v54.

Thanks in advance :fat:

[jjas40]

hi
with galleto I have good job

[ominimicu]

its a Me7 ecu it may go OBD yes, but sometimes it needs boot mode pin 24 of flash to ground

[beti88]

hi
with galleto I have good job

Did you do it by OBD?
Galleto v54 or other version?

[ominimicu]

U can do OBD but leave ecu open to make the bridge.
U can use bench too, or KTag!

[scheitan]

hi

mpps do it by obd on bench without problems. no need to immo off or some other methods. just read and write.
or better in car with galletto by obd. never had problems.

rg

[motorsportsz]

I've always managed these via obd. Some cars are fussy and ask for more than 13.5v

[mihaiservice]

its a Me7 ecu it may go OBD yes, but sometimes it needs boot mode pin 24 of flash to ground

Hi
all 163hp from year 2005 are MED9.1 for sure,only 150hp and 180hp before year 2004 are ME7.1 or ME7.5





Mike

[ddillenger84]

2005 1.8t is ME7.5

It can be done via OBD but beware of P1681 with some clone tools after programming.

[TCSTigersClaw]

Mr Daz is right , it is 1000% ME7.5 ultra friendly ECus , most tools do them. With Original Tool you won`t have any problem at all