PDA

View Full Version : Clone EDC17CP14



snatchme
5th August, 2015, 01:59 PM
Hello Friends,


I want to ask if somebody can help me, i need to clone an EDC17CP14.
and i need to have the data swapped in the files.
in the attachment are the 2 data sets, the data from original needs to be swapped to the replacement ECU.
Mind that the SW versions are not the same! but both ECU's are HW:01 versions.
So swapping shut be possible.
Read/write will be done with MAGPRO2 master.

Here are the 2 file sets: 325370

Thanks for your help.

ominimicu
6th August, 2015, 12:27 AM
write flash to new ecu and do immo off

rm23
6th August, 2015, 01:04 AM
your fixed file eeprom !

snatchme
7th August, 2015, 08:16 AM
Thanks,
Gonna test on monday, i will keep you informed.

sjc1
10th August, 2015, 05:33 PM
Did this work?
Could I clone the complete data with Ktag?

otzi
11th August, 2015, 07:59 AM
I m interessing to
+1

overs0ull
11th August, 2015, 07:17 PM
yes you can when you read the hole info on boot mode from the ecu and the hw number is the same just replase the second one ecu with the reading form the dead ecu and make immo off or like the "RM23" make - fix the eeprom and all fine .