PDA

View Full Version : Tacho Universal Sync Error



Pages : [1] 2

MrMike
31st July, 2009, 11:01 AM
Hey guys, just wondering if anyone uses the tacho universal odometer correction tool? and if you have come across the sync error? Mine came with a kit used to reprogram the main unit when this happens however it does not work.

I have just been using the tachosoft mileage calculator which is an absolutely awesome peice of kit. but there is no point having a non working tacho universal. any help would be awesome.

Cheers
Mick:bounce:

sixpack
31st July, 2009, 03:59 PM
Hey guys, just wondering if anyone uses the tacho universal odometer correction tool? and if you have come across the sync error? Mine came with a kit used to reprogram the main unit when this happens however it does not work.

I have just been using the tachosoft mileage calculator which is an absolutely awesome peice of kit. but there is no point having a non working tacho universal. any help would be awesome.

Cheers
Mick:bounce:

use this:

regards

Chadder
31st July, 2009, 10:03 PM
If your tacho universal is newer IE : 2008.3 then use the following software , you need to make you own serial cable but the pin outs are shown on the software .

If the software does not work you can use the option in the pdf. if you need the option in the pdf give me a pm .

RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/262275085/2008updater.rar)

sixpack
31st July, 2009, 10:15 PM
If your tacho universal is newer IE : 2008.3 then use the following software , you need to make you own serial cable but the pin outs are shown on the software .

If the software does not work you can use the option in the pdf. if you need the option in the pdf give me a pm .

RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/262275085/2008updater.rar)

this is the same as my upload

Chadder
31st July, 2009, 10:43 PM
Sorry mate only looked at the pdf you posted the 2.2 updater kit wont work with the 2007 tacho universal as the boards are different .

teerak2uk
1st August, 2009, 08:32 AM
and if im right ater 50 vehile the kit will stop working and ou will need another update kit


We finally resolved the SYNC problem now. Our tacho universal will not get the SYNC problem any more!
Features

Never locking or SYNC even you do over 1000 cars
No delay for starting the machine after testing 50 cars
Manual for anyone that needs it
http://www.autoecutools.com/download/0321-PDFs-01English.rar

http://www.autoecutools.com/download/0321-PDFs-02English.rar

sixpack
1st August, 2009, 08:50 AM
Sorry mate only looked at the pdf you posted the 2.2 updater kit wont work with the 2007 tacho universal as the boards are different .

your are right, i did upload the old pdf file, o... well maybe an member needs it
the exe however is the same

MrMike
9th August, 2009, 06:10 AM
Hi that software that you posted chadder looks like it is worth a shot.... im going to sound like a total noob but how do i make a null modem cable and where on the device does it go?

Chadder
9th August, 2009, 10:39 AM
it goes into the 9 pin d shaped slot on the right hand side .

i think you only have to swap 1 or 2 wires over, if your not confident about making one than get someone local to knock you one up .

Did you not get the mainframe repair kit with you unit ?


Sort of related : there is a new version of the tacho universal called super tacho 2009 it has much larger coverage than the 208.3 and is also you can update the tool really does not lock out the only bad point is that it costs about ?1350.00.

teerak2uk
9th August, 2009, 12:35 PM
there is also this oe on the market but dont know much about it

EDR Electronics Dashcoder Pixelreparatur Tacho Pixel Tachometer (http://www.edrelectronics.de/english/dashcoderen.html)

MrMike
9th August, 2009, 01:54 PM
Hi thanks for your reply....i googled the null modem cable..looks pretty straight foreward to me. and i did get the mainframe repair unit with my tacho universal but it doesn't work. i can program the two main chips no problem. but as soon as it comes to programing the 24c02 eeprom it keeps stuffing up. .. does anyone have a dump of this eeprom that i can load with my normal programmer???

Thanks again guys this site is awesome

marcio1758
9th August, 2009, 03:21 PM
24c02 programming file eerpom filled to 50 cars, just program your pot ready and can work normally ....

Chadder
9th August, 2009, 09:19 PM
there is also this oe on the market but dont know much about it

EDR Electronics Dashcoder Pixelreparatur Tacho Pixel Tachometer (http://www.edrelectronics.de/english/dashcoderen.html)


it is the same as i mention.

bobanv
9th August, 2009, 09:28 PM
it is the same as i mention.
Thanks:proud:

MrMike
10th August, 2009, 12:31 AM
I tried that dump that you sent me and still it turns on normal and i select ok. it says "Update Handheld" and a few seconds later "????SYNC????" and i cant go any further

Its driving me insane now....has anyone else encountered this?

Thanks again guys

Chadder
11th August, 2009, 07:57 PM
it sounds like you have a obd factory one, can you take a picture for me of your repair kit and a picture of the board in the tool, you should not really need to program anything just swap a few parts over but the above shipped alot of incomplete ones .

MrMike
12th August, 2009, 01:21 PM
hey chadder can you pm me an email address and i will send you some pics. thanks again mate.

teerak2uk
12th August, 2009, 01:27 PM
anyone have probs with their 912 dongle cant get my bloomin one to work

amandazhang2001
13th August, 2009, 04:24 AM
Hi Mike,

We understand your tacho odometer problem. Kindly note now we supply Tacho Odometer that without SYNC problem anymore, and the quality is very nice. The Tacho Odometer is not complex machine, and we supply the detail instroction to show how to process it.

If you have any question, or advice, welcome you contact us by mail: amandazhang2001@hotmail.com

Amanda

ant21000
28th August, 2009, 01:46 PM
thanks for the eeprom.bin

ant21000
28th August, 2009, 01:50 PM
24c02 programming file eerpom filled to 50 cars, just program your pot ready and can work normally ....

ok, i go to try, thanks for this man!!

ant21000
28th August, 2009, 01:52 PM
24c02 programming file eerpom filled to 50 cars, just program your pot ready and can work normally ....


HI Marcio, how I can do for download this file?, thanks for all!!

z786
28th August, 2009, 02:36 PM
Here mate, best $47 dollars u'l spend

China ECU Tools Centre (http://www.ecutool.com/productshow.asp?id=999&sortsid=3503&sorts=Odometer%20Correction)

guillermoc
10th October, 2009, 06:09 PM
Hello, it cannot unload, it appears the page in target, you can help, thanks.

guillermoc
10th October, 2009, 06:10 PM
24c02 programming file eerpom filled to 50 cars, just program your pot ready and can work normally ....


Hello, it cannot unload, it appears the page in target, you can help, thanks.

lupu_sandu
10th October, 2009, 10:07 PM
Hy guys,
This dumps are from here: China ECU Tools Centre (http://www.ecutool.com/productshow.asp?id=999&sortsid=3503&sorts=Odometer%20Correction),
but without PIC dump. PIC is encrypted and i cannot read.
But after reprogram 24c02 and both IC with this dumps works OK.
What i see is if you have PIC from this package tacho will start in 2 secons, but if you have another PIC (ex. from DIGA2008, EFICHIP2008, etc) diga will start after 20 sec delay.
For me works OK on 3 tacho machines.

guillermoc
11th October, 2009, 04:52 AM
Hello, it unloads the file and for surprise the data of my 2402 are equal, although it follows without igniting, I do not have to read the IC, the internal LED (green) blinks three times and it goes out, what is my problem?
Thanks.

kaz_1
16th October, 2009, 10:51 PM
there is a program around called fix diag which sorts the synch issue out.

memo
20th October, 2009, 07:56 PM
Hi what i need to unlock my tacho , is version Jan 24 2008.
some type of cable ? or soft ?
please let me know.

asad2077
25th October, 2009, 03:25 PM
Hey guys, just wondering if anyone uses the tacho universal odometer correction tool? and if you have come across the sync error? Mine came with a kit used to reprogram the main unit when this happens however it does not work.

I have just been using the tachosoft mileage calculator which is an absolutely awesome peice of kit. but there is no point having a non working tacho universal. any help would be awesome.

Cheers
Mick:bounce:
hi guys

i recently bought the universal tachometer and i doesnt seem topick up the correct mileage when i input the make and model it gives an error message when i try to change the mileage if anyone can help i would be very grateful!

teerak2uk
25th October, 2009, 08:14 PM
hi guys

i recently bought the universal tachometer and i doesnt seem topick up the correct mileage when i input the make and model it gives an error message when i try to change the mileage if anyone can help i would be very grateful!


what kit are you using
what clip are you using
what adapter are you using

what car
what model
what year

pawlenko
30th October, 2009, 07:23 AM
hi

i have i2c+2xflash which working without pic

if anyone need msg me

rsibiza
31st October, 2009, 12:54 PM
If your tacho universal is newer IE : 2008.3 then use the following software , you need to make you own serial cable but the pin outs are shown on the software .

If the software does not work you can use the option in the pdf. if you need the option in the pdf give me a pm .

RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/262275085/2008updater.rar)


Hi Chadder.

I am using an tachouniversal and saw just your post of updatekit,now i want if possible ask,
if i have to wait 50 cars and appearing ????sync???
display or update earlier to prevent?


In case,what will cost the pdf solution mentionned there.

Kind regards.

butonu
9th November, 2009, 01:41 PM
For me not work dump from Lupu Sandu, i write this dump and the screen is white.I have a clone from China version 01.2008.
Best regards

lupu_sandu
11th November, 2009, 11:18 PM
butonu: (http://www.digital-kaos.co.uk/forums/members/67801-butonu/)
Try to swap IC. For me work OK on 3 tacho.

gsm25
13th November, 2009, 09:21 PM
:vollkommenauf:
it sounds like you have a obd factory one, can you take a picture for me of your repair kit and a picture of the board in the tool, you should not really need to program anything just swap a few parts over but the above shipped alot of incomplete ones .

caveman008
19th November, 2009, 01:26 AM
:stupido3:
:wink:
Hello,
got same problem to sync my Tacho Universal.
Hope get it to work.

amandazhang2001
19th November, 2009, 06:12 AM
I have the 100% working sync software, if you need, I can send it to you.

milanoffracing
19th November, 2009, 09:02 AM
I have the 100% working sync software, if you need, I can send it to you.

Please, upload your sync software if you can. Thank you in advanced.:party:

amandazhang2001
19th November, 2009, 10:10 AM
Can you tell me how to upload it to this forums? or upload it to other website?

teerak2uk
19th November, 2009, 10:12 AM
Here is the sync repair 50 times

milanoffracing
19th November, 2009, 10:42 AM
Can you tell me how to upload it to this forums? or upload it to other website?

Try to attach to your post, or upload to rapidshare and post the link here.:adore:

amandazhang2001
19th November, 2009, 11:05 AM
Hi, the download link is:

RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/309131770/tacho_100__working.rar.html)

MD5: 06F2293F00898E2176F959C80CF80816

Pls read it.

ee28
23rd November, 2009, 01:54 PM
Hi, the download link is:

RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/309131770/tacho_100__working.rar.html)

MD5: 06F2293F00898E2176F959C80CF80816

Pls read it.


please upload again

melcool
23rd November, 2009, 07:15 PM
Hi, the download link is:

RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/309131770/tacho_100__working.rar.html)

MD5: 06F2293F00898E2176F959C80CF80816

Pls read it.

Please reupload

This is the 100% working sync software from amandazhang2001

papovic
30th November, 2009, 12:16 PM
Hello my Tacho Universal Maschine dont start up. I have make a update because he shows me SYNC ... Now when i put it on the show me Efi Chip and then i press ok and then is nothink.



help me please --

what i must do

AEN
30th November, 2009, 01:29 PM
papovic,

I'm affraid you have to buy Tacho Universal repair kit- ICs programmed in advance. It always happened with chinese TUs when pressing "O"- update during start up.

maxduan
30th November, 2009, 08:22 PM
Hello my Tacho Universal Maschine dont start up. I have make a update because he shows me SYNC ... Now when i put it on the show me Efi Chip and then i press ok and then is nothink.



help me please --

what i must do
Salve: mi sono iscritto da poco, e sono Italiano, e ho visto che trattate cose interessanti . Se vi occorrono i file delle 29f40 eeprom 24c02 e PIC12F629 per la riparazione del tacho sino alla versione 2008 posso inviarli a chi servono.

Saluti Max

Hello: I joined recently, and I am Italian, and I saw that cover things interesting. If you need files 29f40 and 24C02 eeprom PIC12F629 to repair the tacho up to the 2008 version I sent to those who serve.


Excuse my English but it is a rusty

karol450
2nd December, 2009, 07:46 AM
Salve: mi sono iscritto da poco, e sono Italiano, e ho visto che trattate cose interessanti . Se vi occorrono i file delle 29f40 eeprom 24c02 e PIC12F629 per la riparazione del tacho sino alla versione 2008 posso inviarli a chi servono.

Saluti Max

Hello: I joined recently, and I am Italian, and I saw that cover things interesting. If you need files 29f40 and 24C02 eeprom PIC12F629 to repair the tacho up to the 2008 version I sent to those who serve.


Excuse my English but it is a rusty


http://www.google.pl/images/cleardot.gifWyświetl tekst transliterowany na alfabet łaciński.
hi.
I need a dump PIC12F629. or you can send me. thanks

maxduan
2nd December, 2009, 09:22 AM
Hello karol450, give me your email address you send the files.

lillov
4th December, 2009, 03:53 AM
prejudice but because I can download perhaps because they are new arrival

pawlenko
4th December, 2009, 08:20 PM
HI

could you send me dumps for tacho universal??



thx



Hello karol450, give me your email address you send the files.

teerak2uk
4th December, 2009, 10:18 PM
Does this program not fix that 50 times sync error?

Tuning Runner
9th December, 2009, 11:28 PM
Salve: mi sono iscritto da poco, e sono Italiano, e ho visto che trattate cose interessanti . Se vi occorrono i file delle 29f40 eeprom 24c02 e PIC12F629 per la riparazione del tacho sino alla versione 2008 posso inviarli a chi servono.

Saluti Max

Hello: I joined recently, and I am Italian, and I saw that cover things interesting. If you need files 29f40 and 24C02 eeprom PIC12F629 to repair the tacho up to the 2008 version I sent to those who serve.


Excuse my English but it is a rusty


MAXDUAN our friend sent me the file,
the pic for Tacho Universal 2008.:burnout:

angeljose1234
13th December, 2009, 07:53 PM
I tried that dump that you sent me and still it turns on normal and i select ok. it says "Update Handheld" and a few seconds later "????SYNC????" and i cant go any further

Its driving me insane now....has anyone else encountered this?

Thanks again guys
yes , i had same problem, there is an update kit and works good , go to www.ecutools.cn:devil:

angeljose1234
13th December, 2009, 08:00 PM
Hi what i need to unlock my tacho , is version Jan 24 2008.
some type of cable ? or soft ?
please let me know.
yes ecutoos sell a kit for 200 dls and works fine:devil:

angeljose1234
13th December, 2009, 08:04 PM
hi, i have a tacho v 2008 but my problem is i dont have the squematic for how to work on expedition 1999, i dont know how to do te conections on the instrument cluster, please hel me some one driving me crazy

ajpds
13th December, 2009, 09:11 PM
use this:

regards

Hi

The link is broken, please help

regards

gegapodoelse
23rd December, 2009, 04:24 AM
:congrats:It(He,She) is what queria, thanks to ... I have byline on NEC (pad associated etc.)

QUOTE=marcio1758;250266]
24c02 programming file eerpom filled to 50 cars, just program your pot ready and can work normally ....[/QUOTE]

boboss80
23rd December, 2009, 08:35 PM
[QUOTE = melcool; 349199] S'il vous pla?t reupload

Cela correspond ? 100% du fonctionnement du logiciel de synchronisation de amandazhang2001 [/ QUOTE]

slt comment je peut telecharger ton kit syncro merci d'avance voici mon mail ou cas (alpina8080@hotmail.com)

gmb45
23rd December, 2009, 08:36 PM
please post in English m8

boboss80
23rd December, 2009, 08:43 PM
bonjour qui peut me dire comment faire pour pouvoir telecharger les fichi merci a tous et toutes

gmb45
23rd December, 2009, 08:46 PM
bonjour qui peut me dire comment faire pour pouvoir telecharger les fichi merci a tous et toutes
this is an English speaking forum m8 , u wont get any help if u dont speak it m8

tiziano
30th December, 2009, 10:35 PM
MAXDUAN our friend sent me the file,
the pic for Tacho Universal 2008.:burnout:
ciao, sono anch'io Italiano e sono a Varese, h? un'officina e h? preso il tacho un. ma con le foto in pdf non ci capisco nulla e poi i cavi non sono come quelli delle foto, se tu non sei della mia zona( in modo che non ti possa fare concorrenza ) ti sarei grato se potessi aitarmi a capire qualcosa di piu, al limite ti mando la mia mail.
grazie in anticipo e auguri di buon anno,Tiziano

sixpack
30th December, 2009, 10:40 PM
ciao, sono anch'io Italiano e sono a Varese, h? un'officina e h? preso il tacho un. ma con le foto in pdf non ci capisco nulla e poi i cavi non sono come quelli delle foto, se tu non sei della mia zona( in modo che non ti possa fare concorrenza ) ti sarei grato se potessi aitarmi a capire qualcosa di piu, al limite ti mando la mia mail.
grazie in anticipo e auguri di buon anno,Tiziano

please post only in english, thanks

tabasco1
11th January, 2010, 01:13 AM
Can you tell me how to upload it to this forums? or upload it to other website?
Please, upload your sync software if you can. Thank you in advanced

tabasco1
11th January, 2010, 01:14 AM
Please, upload your sync software if you can. Thank you in advanced

teerak2uk
12th January, 2010, 11:01 AM
Please, upload your sync software if you can. Thank you in advanced


Pls see file but DONT use update option

robertomdk
21st January, 2010, 01:48 PM
Hello, my name is robert, i have a problem with my tacho 2008, i need to update my tacho 2008 becouse the software is of 2006, how can i do it, can i update with my computer and any kind of software, Thank you very much!

amandazhang2001
21st January, 2010, 02:06 PM
I can send the 2008 software to you, then you try to update it. If not work,that would be hardware problem. Hardware need to update. The software is big file, can you add my messager then I send it to you via messager? ( no addys to be posted )

milanoffracing
21st January, 2010, 02:12 PM
I can send the 2008 software to you, then you try to update it. If not work,that would be hardware problem. Hardware need to update. The software is big file, can you add my messager then I send it to you via messager? ( addy removed )

Hi, can you upload it somewhere for all of us:beer:

amandazhang2001
21st January, 2010, 02:55 PM
ok. please tell me what website can upload big file free? I will upload it there and tell you the link.

milanoffracing
21st January, 2010, 03:01 PM
ok. please tell me what website can upload big file free? I will upload it there and tell you the link.

Rapidshare or Megaupload.:top:

amandazhang2001
21st January, 2010, 03:11 PM
ok. will upload it and tell you the link.

robertomdk
25th January, 2010, 10:39 AM
Hello again, i have a new problem with my tacho 2008, when i'm going to access by diagnostic port never show me the old millage and allwais shows "KEY NOT FOUND", i don't know whats its means!

Thanks!!

cameronsistemas
25th January, 2010, 08:39 PM
Hello fellow
I recently bought a TachoPro2008.1 , but when I turn appears DIGA CONSULT. I think buying a very bad imitation of the device I needed. I know the steps to update my device, because it shows me regularly?? SYNC???? but when you turn it off and continued working. Thanks

justy22
25th January, 2010, 09:33 PM
Anybody intrested in starting a thread on what cars can be done via diagnostic port with tacho universal, I have done the following models via diagnostic port - 52 plater jeep cherokee, 01 beetle, 2000 vectra, 03 VW caravelle,

and the following via solder - 99 impreza, 99 Puma, 03 laguna

anybody who wants to start a tip sharing thread as this is a great machine just very little support for it

amandazhang2001
26th January, 2010, 04:09 PM
ok. will upload it and tell you the link.-----------------hi, the tacho completed software is uploaded to rapidshare. There are 3 files total as the completed file are about 320mb, and rapidshare just allow max200mb one time. The links are:

Download link: http://rapidshare.com/files/341208450/Tacho_completed_software_1.rar (http://rapidshare.com/files/341208450/Tacho_completed_software_1.rar)

Download link: http://rapidshare.com/files/341258974/Tacho_completed_2.rar (http://rapidshare.com/files/341258974/Tacho_completed_2.rar)
Download link: http://rapidshare.com/files/341321297/TACHO_Completed_software_3.rar (http://rapidshare.com/files/341321297/TACHO_Completed_software_3.rar)

Best Regards to all you.

teerak2uk
26th January, 2010, 04:12 PM
The manual will tell you what you need to know

justy22
27th January, 2010, 08:17 PM
How do i use tacho universal to do a Micra 04 Model

juisro
1st February, 2010, 02:52 AM
hi, the link no work
Download link: http://rapidshare.com/files/341208450/Tacho_completed_software_1.rar (http://rapidshare.com/files/341208450/Tacho_completed_software_1.rar)

sarigol45
1st February, 2010, 07:15 AM
tacho 2008 sync problem find
good dumps:rulez:
thanks buton :D

amandazhang2001
1st February, 2010, 02:47 PM
hi, the link no work
Download link: http://rapidshare.com/files/341208450/Tacho_completed_software_1.rar (http://rapidshare.com/files/341208450/Tacho_completed_software_1.rar)
Hi, the first part software is updated upload already. Please check.

amandazhang2001
1st February, 2010, 03:02 PM
hi, the link no work
Download link: http://rapidshare.com/files/341208450/Tacho_completed_software_1.rar (http://rapidshare.com/files/341208450/Tacho_completed_software_1.rar)
Hi, this is updated uploaded of first part software. Please check.

RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/344304631/Tacho_completed_software_1.rar.html)
MD5: 5C868F7C0122EA98535CD472E563C723

hornhunter
2nd February, 2010, 08:00 PM
Here is the 24c02 dump for You guys. It solving the update handheld message. Do not worry the dump is working fine.
Cheers....

fei1758631
5th February, 2010, 11:49 AM
same here.. i came from indonesia n i have a similar problem with u guys.. i try to move 24c02 with a new one but still dont work.. any idea?

ohara
12th February, 2010, 02:45 PM
Hi, i have the same problem with ???SYNC???, any solution,plz?

leon15
12th February, 2010, 07:42 PM
I have the 100% working sync software, if you need, I can send it to you. Please, upload your sync software if you can. Thank you in advanced.

leon15
12th February, 2010, 07:53 PM
Hi, i have the same problem with ???SYNC???, any solution,plz?

timi
16th February, 2010, 03:23 PM
your are right, i did upload the old pdf file, o... well maybe an member needs it
the exe however is the same


HI guy , I have myself a sync problem
I did the sync and now I have nothing on the screen just "start anew" Did anyone get the same on his screen

teerak2uk
17th February, 2010, 12:16 AM
Here are your options check Diga_repair.rar file

RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/351608162/Diga_Repair.rar)





Download hotfile files free

RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/351603457/Downloader.rar)

hartar197
18th February, 2010, 01:18 AM
Many many thanks

BigJ
19th February, 2010, 09:13 AM
[QUOTE=teerak2uk;460705]Here are your options check Diga_repair.rar file

RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/351608162/Diga_Repair.rar)

Teerak2uk, many thanks... solved the problem. swiped a 24c02 off of an old pc133 ram, used the tacho via digasuite to load the 24c02 dump file, took tacho apart and swapped the 24c02's and nearly fell off my chair! It is alive again!The troubleshooter in the pdf made things clear. Many thanks again!

SCRAP THIS PLAN OF MINE; I've done some research into it. See http://www.digital-kaos.co.uk/forums/f104/tacho-universal-update-handheld-sync-fix-how-102933/ for the fix.

jacques71
19th February, 2010, 11:05 AM
thanks a lot guys

panosv75
4th March, 2010, 01:45 PM
thank you very much.

teerak2uk
4th March, 2010, 08:20 PM
[QUOTE=teerak2uk;460705]Here are your options check Diga_repair.rar file

RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/351608162/Diga_Repair.rar)

Teerak2uk, many thanks... solved the problem. swiped a 24c02 off of an old pc133 ram, used the tacho via digasuite to load the 24c02 dump file, took tacho apart and swapped the 24c02's and nearly fell off my chair! It is alive again!The troubleshooter in the pdf made things clear. Many thanks again!


your welcome matey glad you god sorted

Remonter
8th March, 2010, 08:39 PM
Hello, i need damp 24c02 my mail avto_plus@mail.com thanks

BigJ
9th March, 2010, 05:20 AM
[quote=BigJ;464107]


your welcome matey glad you god sorted

dunno about god sorted, but definately a heaven send...:laugh:

Rito
11th March, 2010, 11:04 PM
My diga have a different problem.
Last time I have conect power says "UPDATE HANDEL" and after than not shows anymore display.
I have bay kit repair from ecutools but not work..

I have swap ic?s but not show anything..only have light...

Have solution??
I need reprogram??

Thanks

BigJ
12th March, 2010, 10:08 AM
Put the IC111 and IC112 back. Do like I mentioned above with the 24c02. UPDATE HANDHELD usually means you have reached the 50 car limit. The 24c02 is responsible for that.

Rito
12th March, 2010, 09:57 PM
Put the IC111 and IC112 back. Do like I mentioned above with the 24c02. UPDATE HANDHELD usually means you have reached the 50 car limit. The 24c02 is responsible for that.

But my diga not show anything in display...
I think my bord is damage...

You know how repair?

BigJ
20th March, 2010, 05:59 AM
See attached .pdf

kinetz
30th March, 2010, 09:23 PM
During the upgrade of my Tacho 2008, the software told me to reboot, and now I can not see the menu of the Sync. When you start leaving me on display at the top "USA 137" and if I press the 0 key you just see a white bar. I want to know if someone is so kind as to tell me how many times I have to press the down arrow and how many times the OK button to access the SYNC. Thank you, Fulvio.

kiry
8th April, 2010, 06:08 AM
thanks really good

teerak2uk
8th April, 2010, 08:31 AM
mine says

USA UPDATE 06/03
9S12 TOOLS
912/9S12 UNLOCK
908 TOOLS
NEC
NEC .AU
OPTIONS
UPDATE
SYNC

this is going down from usa bit

cosanostra42
15th April, 2010, 08:24 PM
Hi Guys,
I bought a Tacho Universal 2008 from China, (a Clone from the Diga Consult) it was working fine like described but ,I do a mistake, hit the "0" to Update in the Start Menu, after a while "RESET" is shown in the display and that thing is frozen. Now what..?? After a hour disconnected from the power supply and connected again the Tacho starting up normaly (I was very happy), hit the "OK" button, Software Version is shown in the display and then ""RESET"" that set.
Can somebody help me please..?? I have read the forum for a while and not found some similar...!!!HELP!!! :afraid:

yelkcos
21st April, 2010, 08:20 AM
When I try to use 2008updater always get "response timeout (1,1,0,0)", What is happening?

teerak2uk
21st April, 2010, 10:15 AM
When I try to use 2008updater always get "response timeout (1,1,0,0)", What is happening?


why are you using updater and what is your problem

yelkcos
22nd April, 2010, 09:13 AM
I tried repairing car list empty. I've done flashing with "hornhunted" dump file. Work 100% ok now !!

Which Sofware do I need to transfer eeprom to PC? Where Can I get?

thanks for your answer !!

Best Regards from Spain

kadochi
22nd April, 2010, 07:25 PM
legal muito bom muito mesmo....

24c02 programming file eerpom filled to 50 cars, just program your pot ready and can work normally ....

teerak2uk
22nd April, 2010, 09:55 PM
I tried repairing car list empty. I've done flashing with "hornhunted" dump file. Work 100% ok now !!

Which Sofware do I need to transfer eeprom to PC? Where Can I get?

thanks for your answer !!

Best Regards from Spain
if you mean transfer from tacho to pc and vica versa then use this

z786
22nd April, 2010, 10:45 PM
how do i program the ic111 and ic112?
wat eeprom does it come under?
or can i do it thru DOS??

im kinda stuck here, bort a never lockin kit from ecutool and its in sync, f*ck ar*eholes

yelkcos
23rd April, 2010, 11:38 PM
Tacho dump don't work for me. The program say "not in sync". I use null modem cable on com1.

hcip
24th April, 2010, 01:04 AM
how do i program the ic111 and ic112?
wat eeprom does it come under?
or can i do it thru DOS??

im kinda stuck here, bort a never lockin kit from ecutool and its in sync, f*ck ar*eholes


use Terminal program to do it in DOS

Software DOS (Firmware, drivers, programming examples) - taskit Embedded Systems (http://www.taskit.de/en/support/software.htm)

marcolr
29th April, 2010, 10:06 PM
Hello, I'm new here. Greetings to everyone.
I have a tacho v2008.7 has stopped reading eeprom since I tried to change odometer a Fiat Stilo with 912 cable with no success.
If I reprogram the 24C02 to the dump that are here so I can fix?

Thanks

marcolr
30th April, 2010, 11:40 AM
if you mean transfer from tacho to pc and vica versa then use this

Hi teerak2uk, could you attach this file one more time please? I downloaded it and when I want descomprime it says me "archive or data corrupted".

One more question, Have you a flash and eeprom backup of tacho 2008.7? I have the last tacho version and my board hasn?t PIC or oscillator as board seen in manuals. I need a backup of tacho V2008.7 because I program Ic111 and Ic112 whih the backups of this post and no working well with any.

Thanks

teerak2uk
30th April, 2010, 02:11 PM
Hi teerak2uk, could you attach this file one more time please? I downloaded it and when I want descomprime it says me "archive or data corrupted".

One more question, Have you a flash and eeprom backup of tacho 2008.7? I have the last tacho version and my board hasn?t PIC or oscillator as board seen in manuals. I need a backup of tacho V2008.7 because I program Ic111 and Ic112 whih the backups of this post and no working well with any.

Thanks


if you look at post #111 it is there

marcolr
30th April, 2010, 08:18 PM
if you look at post #111 it is there
Thanks for response. Before posting I had already downloaded the file. But I get an error to decompress. "Damaged Archive"
Anyway in that file is the software to communicate tacho with the PC. I also needed a backup of the ic111, ic112 and the 24C02 of the latest version (July 2008).
Regards

mehdi76
1st May, 2010, 04:41 PM
merci a vous de votre aide pour le tacho universal le mien est bloqu? et je d?sesp?r? de le refaire marcher un jour .

madse
2nd May, 2010, 12:29 PM
Hello,i just bought a Tacho Universal too!How can i know if its a china clone too?Does someone know?

Thanks

hcip
2nd May, 2010, 12:42 PM
Hello,i just bought a Tacho Universal too!How can i know if its a china clone too?Does someone know?

Thanks

you can figured it at its name, its a chinese
Original machine has discontinued

tas_daz
4th May, 2010, 09:01 PM
i want to take the tacho pro 2008.is the same like tacho pro kit?or i can find something like tacho pro 2008 but more cheaper to conect with laptop?thanks

z786
4th May, 2010, 09:03 PM
they are 2 different things, the laptop version is rubbish

tas_daz
4th May, 2010, 09:32 PM
ok thanks i take the tacho pro from china and i told you
.this machine can update for newer version than 2008?

teerak2uk
4th May, 2010, 09:43 PM
2008 is the last version

marcolr
4th May, 2010, 09:47 PM
2008 is the last version

Yes, but 2008/07. Can you let me de dumps of this version for Ic111 Ic112 and 24c02??

Many thanks

teerak2uk
4th May, 2010, 09:50 PM
Yes, but 2008/07. Can you let me de dumps of this version for Ic111 Ic112 and 24c02??

Many thanks


There you go enjoy

marcolr
4th May, 2010, 10:51 PM
I already have this dump, but it is not 2008 / 7, is 2008 / 1. Jan 24 2008 exactly. My tacho is 07.07.2008 but i updated it by error and now the flashes are empty and I don?t get the software that I had

marcolr
6th May, 2010, 11:20 PM
Nobody has a 2008.7 Tacho Pro?
I need a Dump of Ic111, Ic112 and 24c02 Please

http://www.imaxenes.com/mini/1_130309_21fn18hm.jpg (http://www.imaxenes.com/imagen/1_130309_21fn18hm.jpg.html)

Regards

baandit
18th May, 2010, 09:08 PM
Hello, I have Tacho Universal 2008, since one week it has a damage. It looks like it works fine, I mean it doesn't show any errors like "SYNC" or "RESET". But it can't correct any mileage, it seems that the device has no connection to the odometers???

Knows somebody this error and could help me?

marcolr
18th May, 2010, 10:26 PM
Hello, I have Tacho Universal 2008, since one week it has a damage. It looks like it works fine, I mean it doesn't show any errors like "SYNC" or "RESET". But it can't correct any mileage, it seems that the device has no connection to the odometers???

Knows somebody this error and could help me?

Your problem is that the 74HC541 are damaged (burned). You can find this componen in any electronic shop or here: Texas Instruments | Semiconductores | L?gica est?ndar y especializada | Drivers de l?nea y b?fer | Familia 74HC |SN74HC541DWRG4 (http://es.rs-online.com/web/search/searchBrowseAction.html?method=getProduct&R=662-8222)

One time you have the component you must change it, for that: Open the tacho, remove keyboard, remove CPU board, remove display and you can see the 74hc541. Desolder it and solder the new one.
Look the pictures
http://www.imaxenes.com/mini/tacho20081ai098a.jpg (http://www.imaxenes.com/imagen/tacho20081ai098a.jpg.html)http://www.imaxenes.com/mini/tacho20081di82rw.jpg (http://www.imaxenes.com/imagen/tacho20081di82rw.jpg.html)

That?s all, one time make this steps your tacho will be work OK.

Regards

baandit
25th May, 2010, 07:32 PM
Thank you for the answer!
The problem is, I changed this buffers allready, but the situation kept the same...
What components could be damaged, too?

marcolr
26th May, 2010, 05:31 PM
Thank you for the answer!
The problem is, I changed this buffers allready, but the situation kept the same...
What components could be damaged, too?

Hello, usually when you can?t read eeprom the problem is the component that I said. When you turn the tach you can hear the relay?
Your tach is red board? or is it green board? If you have red board, can you read the two flashes Ic111 and Ic112 and eeprom 24C02 with willem eeprom programmer or similar, and can you send me the dumps?
Regards

shogun12
4th June, 2010, 11:39 AM
I had same problem.I could hear the relay but it can't correct any mileage. It didn't show any errors like "SYNC" or "RESET". I have changed 24C02 and now I have 'UPDATE' 'SYNC' problem.I have green board.Any suggestion how to sort this out?

motorsport
4th June, 2010, 12:05 PM
hello every body ihave pb on my diga i have change 74HC04 for fix k line all was ok after finish i try to switch on and don want verry strangly !!! and when i take ouf cpu plug and make power my diga switch on juts screen empty

there is some one can hep me please

marcolr
4th June, 2010, 01:47 PM
I had same problem.I could hear the relay but it can't correct any mileage. It didn't show any errors like "SYNC" or "RESET". I have changed 24C02 and now I have 'UPDATE' 'SYNC' problem.I have green board.Any suggestion how to sort this out?

If you don?t have problems with "SYNC" or "UPDATE" or "RESET" don?t change the eeprom 24C02. Change the Buffer 74HC541, you can see the location on the post 131.
If your PCB is green is situated a little further to the right, but close to the parallel port, you can identify it by reference written on the chip.
Regards

marcolr
4th June, 2010, 01:54 PM
hello every body ihave pb on my diga i have change 74HC04 for fix k line all was ok after finish i try to switch on and don want verry strangly !!! and when i take ouf cpu plug and make power my diga switch on juts screen empty

there is some one can hep me please

Where is the 74HC04? Can you upload a photo?
You made sure that all pins are soldered correctly, you haven?t raised any pad or that there is a short between any pin?

Regards

motorsport
4th June, 2010, 08:11 PM
Where is the 74HC04? Can you upload a photo?
You made sure that all pins are soldered correctly, you haven?t raised any pad or that there is a short between any pin?

Regards

hc7404 upper left under display

vinicio1716
4th June, 2010, 08:59 PM
thank you very much you will still sort tacho

marcolr
6th June, 2010, 12:56 PM
thank you very much you will still sort tacho

What was your tacho problem??

d1fferen7
6th June, 2010, 04:35 PM
This should be very helpful, hanks!

omglol
6th June, 2010, 07:27 PM
I am trying to repair my Tacho Universal for ages. I bought it a year ago and done 1 car and after that it did not work anymore.

I changed 74HC541, but the machine just does not want to read EEPROM ... I am using cable #27 (OBD-VW/Opel) on Golf IV '99 with MotoMeter cluster.

Here is the new 74HC541 I am using (tryed to change 2 of them with no success): http://dl.dropbox.com/u/2523271/diga/06062010300.jpg

And here are some pictures of the PCB. Can anyone notice something wrong? Please help. Thanks!

http://dl.dropbox.com/u/2523271/diga/06062010301.jpg
http://dl.dropbox.com/u/2523271/diga/06062010302.jpg
http://dl.dropbox.com/u/2523271/diga/06062010303.jpg
http://dl.dropbox.com/u/2523271/diga/06062010304.jpg
http://dl.dropbox.com/u/2523271/diga/06062010305.jpg

marcolr
6th June, 2010, 09:10 PM
I am trying to repair my Tacho Universal for ages. I bought it a year ago and done 1 car and after that it did not work anymore.

I changed 74HC541, but the machine just does not want to read EEPROM ... I am using cable #27 (OBD-VW/Opel) on Golf IV '99 with MotoMeter cluster.

Here is the new 74HC541 I am using (tryed to change 2 of them with no success): http://dl.dropbox.com/u/2523271/diga/06062010300.jpg

And here are some pictures of the PCB. Can anyone notice something wrong? Please help. Thanks!

http://dl.dropbox.com/u/2523271/diga/06062010301.jpg
http://dl.dropbox.com/u/2523271/diga/06062010302.jpg
http://dl.dropbox.com/u/2523271/diga/06062010303.jpg
http://dl.dropbox.com/u/2523271/diga/06062010304.jpg
http://dl.dropbox.com/u/2523271/diga/06062010305.jpg


Hello, what chip you've changed? because the tacho board has several 74HC541.
You should change the chip that I marked in a red box in the image.

http://www.imaxenes.com/mini/06062010301__resolucion_de_escritorio_1vt45xp.jpg (http://www.imaxenes.com/imagen/06062010301__resolucion_de_escritorio_1vt45xp.jpg. html)

Try to read any type of EEPROM 93Cxx or 24Cxx directly with the eeprom clip and board, if you have a 93c46 select in the tacho Seat Ibiza for example and look after reading the contents to verify that you have data and not all to 00000 or FFFFF.

omglol
7th June, 2010, 10:44 AM
Yes, that's the one I changed. Twice.

I tried reading 95080 and I get all 00 or all FF.

manit
8th June, 2010, 08:43 PM
If your tacho universal is newer IE : 2008.3 then use the following software , you need to make you own serial cable but the pin outs are shown on the software .

If the software does not work you can use the option in the pdf. if you need the option in the pdf give me a pm .

RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/262275085/2008updater.rar)
chadder m8 trying ta get my head around tacho ver numbers i posted ver numbers of tacho here 2008.01 2008.03 2008.07 and was told its just a way of getting you to buy the product that you think its more newer or upgraded ........:bike:

ghauman
10th June, 2010, 08:26 PM
i have obd factory tool, when i programm renault espace 2003 model v1 the mileage is set to zero and i can not get the correct mileage back, anywhone any idea how to solve this?

drpeter
10th June, 2010, 09:03 PM
Yes, that's the one I changed. Twice.

I tried reading 95080 and I get all 00 or all FF.


The 95xxx board is faulty, add some wires and you can read/write 95xxx chips.

Check schematic in attachment

marincovich
11th June, 2010, 12:14 AM
I have a 2008/07/07 version. When i was trying to do a Chrysler neon with the scorpio cable, suddendly my tacho switched off.Y disconnected scorpio cable and power supply and wanted to switched on again but it doesnt start anymore.The display doesnt work at all.The main board is red and display blue.Someone can help me?Thanks.:giveup:

n599fbm
13th June, 2010, 03:20 AM
Hi Friends !!
I?ve a Thacho Univ.V2008,
Seems me that the 17# cable CRYSLER OBDII functions badly, also the NEC adaptor,
Someone has some counsel to solve this?
Thanks and Rgds !!!

C.

jesper4321
14th June, 2010, 08:31 PM
I give up....
Mine says "reset" and you know I hit the "0", i'm new at this don't know chip nr ex.. chance it what ever..I need a guide with pictures and text..I'm that dumb sorry..

One thing at dn't understand is...only by hiting the "0" button the tache universal v.08 is gone.

I have tryed like the manual says (hit the "0" key to update and start the computer with tacho20081Update)
But all I got was "timeout on comm port"

Maybe we all got fu...d none of them are working...enyone got it to work

Thanks
Jesper from Denmark

Only coats me $600

marcolr
16th June, 2010, 05:20 PM
Yes, that's the one I changed. Twice.

I tried reading 95080 and I get all 00 or all FF.

Well, I don?t know what else might be.
Normally when the tacho v2008 does not read eeprom the reason is that chip.
Try to read a 93Cxx or 24Cxx and post results

marcolr
16th June, 2010, 06:29 PM
I have a 2008/07/07 version. When i was trying to do a Chrysler neon with the scorpio cable, suddendly my tacho switched off.Y disconnected scorpio cable and power supply and wanted to switched on again but it doesnt start anymore.The display doesnt work at all.The main board is red and display blue.Someone can help me?Thanks.:giveup:
Hello, I upload a picture of the board which is a component marked with a green square.
Check if these components are fine.
If you have a power supply 12 v, connect the tacho to it and checks for consumption, may be all that is evil is the screen, but is rare.
When you connect the tacho to 12 vdc hear a relay?
The diode D1 is protective, so check first.
R10 should give continuity as a fuse.
U1 is a voltage regulator, find the datasheet and check that the voltages are correct on each pin, so you must do it with the tach powered to 12 vdc.

http://www.imaxenes.com/mini/tacho20081us16bh.jpg (http://www.imaxenes.com/imagen/tacho20081us16bh.jpg.html)

I would appreciate to send me data of ic112 and ic111 (Flash memory) and also the 24C02 eeprom.
If you have a willem programmer for example, you can easily read and help me with a problem I have with a Tacho v2008

Post results

marcolr
16th June, 2010, 06:40 PM
I have a 2008/07/07 version. When i was trying to do a Chrysler neon with the scorpio cable, suddendly my tacho switched off.Y disconnected scorpio cable and power supply and wanted to switched on again but it doesnt start anymore.The display doesnt work at all.The main board is red and display blue.Someone can help me?Thanks.:giveup:

I forgot to tell you something important.
When the Tacho is connect by OBD port of vehicle you can?t powered it to the cigarette lighter adapter at the same time.
Each time you connect to OBD never use the adapter!!!!

Regards

rodrigonicolas
17th June, 2010, 05:04 AM
graciass, por la ayuda amigos son los mejores !!!!!!!

BeianM
17th June, 2010, 09:45 AM
i have obd factory tool, when i programm renault espace 2003 model v1 the mileage is set to zero and i can not get the correct mileage back, anywhone any idea how to solve this?

Are you using the right program? 2003 is the new shape car.
Earlier cars have two options the difference between v1 & v2 I think v1 is the old jaeger dash board, it does not have a bcu. V2 with bsi. This version will reset the dash to 0mls as the bsu will have the correct mls or you have to prog the bsu to the mls you want.
You are lucky to get as far as you have, I'm trying to do the same job but my tacho just says 'working'!!!!

ghauman
20th June, 2010, 10:39 AM
Are you using the right program? 2003 is the new shape car.
Earlier cars have two options the difference between v1 & v2 I think v1 is the old jaeger dash board, it does not have a bcu. V2 with bsi. This version will reset the dash to 0mls as the bsu will have the correct mls or you have to prog the bsu to the mls you want.
You are lucky to get as far as you have, I'm trying to do the same job but my tacho just says 'working'!!!!


It is newest model espace, as far as i know are the new models from 2003 and 2004 V1 and from 2004 til 2006 V2, i managed to get the mileage changed by desoldering the eeprom an read it out with a programmer change the mileage with tachosoft reprogram the eeprom and soldered it back in again, this works perfectly, i only have the problem that the first time i tried to adjust wit universal tacho the data in the eeprom is damaged so now my dash is set to france language and the boardcomputer does not function anymore, i hope some day to find a clean eepromdump to solve all this.

TimmBot
20th June, 2010, 10:44 AM
Ohhh no waaaay! Wow ...so Cool@Q

blacksea2007
20th June, 2010, 01:43 PM
thanks for the info

devilsadvocate
22nd June, 2010, 06:37 PM
Hope this helps:playingball:

comprare2010
3rd July, 2010, 10:16 AM
hello, how can i connect the tacho universal to PC ??

Thanks you

z786
3rd July, 2010, 03:02 PM
hello, how can i connect the tacho universal to PC ??

Thanks you

SEARCH BEFORE POSTING

boboss80
14th July, 2010, 02:28 PM
bonjour peut tu m'aider car je n'arrive pas a lire mes eprom avec mon tacho 24/01/2008 de quoi ca peut provenir
mais au diag ca fonctionne tres bien merci a toi
mon mail (alpina8080@hotmail.com (alpina8080@hotmail.com))

boboss80
14th July, 2010, 03:01 PM
which has the solution for tacho universsel 01/2008 to read eprom
because I can not read the eprom has a clip
but it works correctly by obd diag and I already change the 74hc541
thank you all for your reply

BigJ
15th July, 2010, 10:25 AM
Move that clip about. Press it, wiggle it,even keep down pressure on it while reading and make sure the pins on both the chip and inside legs of the clip are 100% clean (no varnish/ paint/ etc). Always works for me.:bounce:

agmetraton
17th July, 2010, 06:08 AM
:(My Tacho can read more can not modify the KM. can someone help me?

galu
18th July, 2010, 02:54 PM
Can you let me the dumps of this version for Ic111 Ic112 and 24c02??
Thanks!!!

wejet
26th July, 2010, 03:34 PM
I need Ic111, Ic112 and 24c02
red PCB

wejet
26th July, 2010, 03:49 PM
100% work ver. 07.07.2008 Green PCB!

pinky1970
26th July, 2010, 04:00 PM
i have the Tacho 2008, last month by mistake press update. bad mistake. lucky i had a repair kit with Ic111 and Ic112, told out Ic111 & Ic112 put on reproram board plus reprogram the 24c02, but the verion went back to jan 08, when i brought it , it was on July 08, now it takes around 1 minute to boot up. how can i put it back to July 08 verion 14

nenom
29th July, 2010, 02:18 AM
Mensaje de la venta me diga actualisar sincronizaci?n y despues podria ayudarme ALGUIEN SE agradeceria Los Mucho

tomlib
6th August, 2010, 07:54 AM
I have Tacho 2008/7 red pcb. After plug 12V I have blank screen. I load dump 2008/1 and diga starts but show on the display random characters in the background. I load 2008/7 from forum und FF to 24C02 and blank screen, diga not start, not illumination. Please help and sorry for my language ;)

vyko
23rd August, 2010, 08:59 AM
24c02 programming file eerpom filled to 50 cars, just program your pot ready and can work normally ....
Hi all! Please someone can send this file to vyko@dtiltas.lt

tlozinski
2nd November, 2010, 09:03 AM
hello or ask mugłbym podesłanie PIC12F629 content of the mail tlozinski@wp.pl Thanks Gury

aasass
12th November, 2010, 12:29 AM
hi. any got luck upgrade 01 to 07 version?

Artur_Diag
29th November, 2010, 03:43 PM
If anyone has SYNC problem you can contact me. 100% solution !

aliali456
1st December, 2010, 01:32 AM
how do you know how many cars you have done so far and what does it mean when it says login???

aliali456
1st December, 2010, 01:34 AM
how do i know how many cars have already been done i have a tacho universal 2007 with jan 24 2008 update will mine get locked

cizmo
15th December, 2010, 02:55 AM
Please someone can send this file to lopov@live.fr

SSK2012
15th December, 2010, 01:31 PM
Hi everyone,

I have big problem with my tacho, i try to export dump of car but i use wrong software "TachoRemoteUpdater" i block my tacho good software it is tachodump, when i put tacho on message change "tacho 2008" is disappears now is efichip.com when i press button ok list of vehicule is empty.

i open it My PCB color is red my version is 07.2008.

What solution to repair it ?

SSK2012
15th December, 2010, 01:35 PM
100% work ver. 07.07.2008 Green PCB!

Hi,

What software use to flash tacho.

thanks

marcolr
15th December, 2010, 05:51 PM
Hi,

What software use to flash tacho.

thanks

You can try, but I think this files aren?t Ok for your PCB, you need flash files of red Pcb.
But you can try, may be in luck.
For flash tacho you need a software VTERM or any programmer that support 29f040 memory, i.e. Willem programmer.
The tacho has two pcb, you must separate it and in the small pcb you can see two flashes IC111 and Ic112. This two chips you must reprogramm and you will see the car list.
Look the images attached, in the green square are the chips.

http://www.imaxenes.com/mini/tacho20081im61n9.jpg (http://www.imaxenes.com/imagen/tacho20081im61n9.jpg.html)

http://www.imaxenes.com/mini/tacho20081gr94yl.jpg (http://www.imaxenes.com/imagen/tacho20081gr94yl.jpg.html)

http://www.imaxenes.com/mini/tacho20081an59gb.jpg (http://www.imaxenes.com/imagen/tacho20081an59gb.jpg.html)

Regards

amandazhang2001
16th December, 2010, 11:21 AM
Hi everyone,

I have big problem with my tacho, i try to export dump of car but i use wrong software "TachoRemoteUpdater" i block my tacho good software it is tachodump, when i put tacho on message change "tacho 2008" is disappears now is efichip.com when i press button ok list of vehicule is empty.

i open it My PCB color is red my version is 07.2008.

What solution to repair it ?

the unit has block, have to re-program the unit.

SSK2012
16th December, 2010, 02:22 PM
Thank you marcolr and amandazhang2001 for your quick reply.

but i don't have a programmer to reprogram ic, is possible to reprom ic directly on board by com port on tacho ?

thanks

hcip
16th December, 2010, 03:30 PM
is possible to reprom ic directly on board by com port on tacho ?
thanks
Yesss, use terminal program to do it.

marcolr
16th December, 2010, 05:45 PM
Thank you marcolr and amandazhang2001 for your quick reply.

but i don't have a programmer to reprogram ic, is possible to reprom ic directly on board by com port on tacho ?

thanks

You can reprogramm the tacho by COM port, for this you must use VTERM software.

Check PM

Regards

SSK2012
17th December, 2010, 12:27 AM
Yesss, use terminal program to do it.


What's terminal program ?

marcolr
17th December, 2010, 02:02 AM
What's terminal program ?

It?s the same that VTERM

hcip
17th December, 2010, 06:18 AM
here is the original producer of 386EX card (discontinued) that use by diga,

Software DOS (Firmware, drivers, programming examples) - taskit Embedded Systems (http://www.taskit.de/en/support/software.htm)

you can flash your Tacho Universal with a fresh flash image and load a diga software
all you need is on the site posted

SSK2012
17th December, 2010, 11:57 AM
here is the original producer of 386EX card (discontinued) that use by diga,

Software DOS (Firmware, drivers, programming examples) - taskit Embedded Systems (http://www.taskit.de/en/support/software.htm)

you can flash your Tacho Universal with a fresh flash image and load a diga software
all you need is on the site posted

I dont have a fresh image, when i lunch vterm i told me select com port, but problem is i cant select sync mode on tacho.

http://www.digital-kaos.co.uk/forums/f155/tacho-universal-sync-error-48206/index12.html#post887259

look picture. thanks

hcip
17th December, 2010, 12:31 PM
I dont have a fresh image, when i lunch vterm i told me select com port, but problem is i cant select sync mode on tacho.


no need to shift the Tacho in ???SYNC??? mode to communicate in V-terminal, just activate the bios and use the available command in MS-DOS.

SSK2012
17th December, 2010, 12:57 PM
no need to shift the Tacho in ???SYNC??? mode to communicate in V-terminal, just activate the bios and use the available command in MS-DOS.


About fresh image where is it ?

just activate the bios and use the available command in MS-DOS ???

I never use this software i don't understand sorry i don't understand what you say. :(

ianboyle
17th December, 2010, 06:38 PM
Sorry mate only looked at the pdf you posted the 2.2 updater kit wont work with the 2007 tacho universal as the boards are different .

I have a 2007 Tacho Universal last updated Apr 23 2007, was wondering whats my update options if the 2008 upgrade kit is out or is it possible to use the 2008 upgrade with some tweaks, thanks

marcolr
19th December, 2010, 01:20 AM
About fresh image where is it ?

just activate the bios and use the available command in MS-DOS ???

I never use this software i don't understand sorry i don't understand what you say. :(

Fresh image it?s a good dump of flash memory.
Did you read the instructions about VTERM that I send you?

Regards

hcip
19th December, 2010, 08:47 AM
Fresh image is include in the folder of V-term software
This image only the bios and dos shell that boot the 386EX card, no diga software included so it is fresh
his box was corrupt because he attemp to update in efichip website

SSK2012
19th December, 2010, 01:18 PM
Fresh image it?s a good dump of flash memory.
Did you read the instructions about VTERM that I send you?

Regards

Hi yes i read it, problem is i lunch vterm i select good com port i make diga on is block here :

I cant acess on msdos mode.

hcip
19th December, 2010, 01:35 PM
Hi yes i read it, problem is i lunch vterm i select good com port i make diga on is block here :

I cant acess on msdos mode.

Do you have any alternate programmer that can program the two square chips other than v-term?

SSK2012
19th December, 2010, 01:42 PM
Do you have any alternate programmer that can program the two square chips other than v-term?

Hi, i have only xprog-m but is not possible with this, what better solution buy 2 new chip or programmer ?

i dont find solution with vterm to acess on dos mod.

THANKS

marcolr
19th December, 2010, 05:55 PM
Hi, i have only xprog-m but is not possible with this, what better solution buy 2 new chip or programmer ?

i dont find solution with vterm to acess on dos mod.

THANKS

I'd buy a programmer such as Willem i.e., USB Willem EPROM Programmer BIOS PCB 5 en venta en eBay.es (finaliza el 25-nov-10 21:22:04 H.Esp) (http://cgi.ebay.es/USB-Willem-EPROM-Programmer-BIOS-PCB-5-/260685092236)
you can found many how this in ebay or any webpage, use google.
Or you have something how this:
China ECU Tools Centre (http://www.ecutool.com/productshow.asp?id=999&sortsid=3503&sorts)=
but I don?t recommend you the second option because you have a Red Pcb and this Kit Repair works well with green pcb and version 01/2008, but with your pcb you will have any problems with display.
I am speaking from my experience, I might be wrong and that you will work well, I do not know.

With vterm, when you poweron your tacho press key "S" quickly and you must see another menu in Vterm window.

The procedure that I would do:
Get a Willem, get a backup Ic11 and Ic112 of Tacho red pcb, reprogramming flash and ready. Your Tacho as the first day.

I did hundreds of tests and finally got a good result by doing this I said you.

Regards

hcip
19th December, 2010, 06:09 PM
Hi, i have only xprog-m but is not possible with this, what better solution buy 2 new chip or programmer ?

i dont find solution with vterm to acess on dos mod.

THANKS
I have instruction on vterm but I cannot find it on this computer
contact drpeter and ask about it, I have send him the instruction a month ago

email me if you need a Tachofile that fits with your box

SSK2012
20th December, 2010, 10:22 PM
Thanks a lot for all for your help,

I'll watch with the Chinese vendor of ecotools and if he can get the chips for red pcb version 07/2008, if i can't i buy a williem programmer to program my corrupt chip.

I will keep you informed.

regards

alex1986
15th January, 2011, 10:59 AM
Here is the sync repair 50 times
how to use this file , i also got a problem 'SYS" with my tacho 01.2008 . regards

szuwarik
22nd January, 2011, 09:05 PM
welcome everyone I need good dump with tacho never sync best 2008/07 I pay for good file complet with pic and eeprom

d.zio
22nd January, 2011, 09:56 PM
hello to all..........i have 3 cpu boards green pcb with sync error and i ave ordered an other one.......can i fix any of them??is there any way and solution????thanks in advance

fima5207
26th January, 2011, 07:54 AM
Can you tell me how to upload it to this forums? or upload it to other website?


Does anybody have version 2.3 they can post ?

fima5207
26th January, 2011, 08:35 AM
So i got vterm installed and got bin files downloaded.

What do I do next. How do I load them into Tacho Universal

motorsport
30th January, 2011, 02:24 PM
hello some one can found me cpu 12/2007 ? are dump thanks

SSK2012
31st January, 2011, 08:15 PM
Thanks a lot for all for your help,

I'll watch with the Chinese vendor of ecotools and if he can get the chips for red pcb version 07/2008, if i can't i buy a williem programmer to program my corrupt chip.

I will keep you informed.

regards

hi, i buy 2 chip 07/2008 for my tacho on ecutool i'm not receive it !!! 41 DAYS !!!

marcolr
31st January, 2011, 11:22 PM
hi, i buy 2 chip 07/2008 for my tacho on ecutool i'm not receive it !!! 41 DAYS !!!

If you buy a willem ... now you Tacho would be working.

motorsport
1st February, 2011, 07:54 PM
hello some one have dump cpu diga tacho universal 12/2007
because is beter version before i have one diga 12/2007 but i have sell last year and not found seller have this version

i say you why is better alone this version can unlock after 50 times by serial port and sofware
THANKS

aasass
4th February, 2011, 10:55 PM
Hello, i need inctructions how to use V-Term with tacho. Thank you

marcolr
4th February, 2011, 11:42 PM
Here?s what you ask. Vterm + manual

Regards

SSK2012
14th February, 2011, 06:55 PM
hi, i buy 2 chip 07/2008 for my tacho on ecutool i'm not receive it !!! 41 DAYS !!!


i receive today, new chip, i plug it but the problem change, time to tacho boot is so long and after i can't use it this message appear: "Update Handheld" and a few seconds later "????SYNC????"

aasass
16th February, 2011, 10:25 PM
Here?s what you ask. Vterm + manual

Regards

Diga cannot connect to Vterm. As said in manual i have to change dumps in 29F040 of diga. How to do it without programmer? Can somebody give more detailed instruction, thanks.

pipmen
17th February, 2011, 01:17 PM
Have short question. What is the most recent Software for the Tacho Universal?

Mine has the 24 Jan 2008. I do not have the SYNC-Problem. Are there any updates that can be done?

I have seen 2008.07 in the web, but does it really have a different software?

Autel
19th February, 2011, 06:56 PM
hi guys mine tacho universal takes 1 minute to get on? any sugestions what it could be?

aasass
20th February, 2011, 08:26 PM
hi guys mine tacho universal takes 1 minute to get on? any sugestions what it could be?
I had the same issue, so i reprogrammed it and it works fine now

wiseman
21st February, 2011, 01:00 AM
I had the same issue, so i reprogrammed it and it works fine now

how did you do it, v-term?

aasass
21st February, 2011, 12:21 PM
how did you do it, v-term?
I cannot make v-term to work :( I have used repair tool, which reprogramms ic112, ic112 and 24c02

DATAGENIUS
26th February, 2011, 06:38 PM
Good post my friends....:ciao:

vuno01
28th February, 2011, 05:46 AM
Please arthur
i really need help on this tacho pro with the (SYNC)
problem....
even wen i try to put the ic 111 and the ic 112
and even the 24c02 on the board that was supose to
unlock the machine still doesnt work i just dont know what
else to do
Please if you found a solution to this problem
i would appreciate the help
Thanks a lot:hello:

waylyn
28th February, 2011, 10:21 AM
Had the same problem, with my first clone from ECU.

teerak2uk
28th February, 2011, 04:07 PM
maybe easier just to replace board matey

sterling
11th March, 2011, 08:50 PM
I have a Tacho Universal and a Digimaster Basic and both of these will not work by OBD11 Diagnostic. All of the Eproms seem to read and write ok. Ca anyone offer me a cure for this problem please ?? Thanks

magic2036
15th March, 2011, 07:19 PM
version jul 07 2008 still have sync problems?

gauch
30th March, 2011, 07:05 PM
Hi
I have new TachUniversal from ecutool. TachoDump shows me list of saved eeproms and then "Not in sync" and TU shows something like this on pic.
Should I use repair bins and reprogram TU or this is PC problem (Win XP)

Thanks

http://img824.imageshack.us/img824/9611/capturebv.jpg (http://img824.imageshack.us/i/capturebv.jpg/)

http://img215.imageshack.us/img215/4415/sync2.jpg (http://img215.imageshack.us/i/sync2.jpg/)


http://img215.imageshack.us/i/sync2.jpg/

sterling
31st March, 2011, 12:37 AM
I also have a new one and I notice that it wont work with Tacho Dump

gauch
31st March, 2011, 04:34 AM
It's getting worse :(

I did use updater from efichip.....
do not do that guys.
Updater shows : no update available.
Then, without reset, I did check Tachodump and it works great, and then I did power cycle(off/on) and game over.

I forgot main rule: read before do anything :) Now I have black brick.

I tried v-term but can't get into Flash setup menu. Only thing I can see in console:
Starting ROM-DOS
a:\start.exe

Is there a way to reprogram it with vterm or only option is programmer (willem)?
My TU has red pcb.

Thanks,

gauch
7th April, 2011, 06:48 PM
Hi

I tried all bins (IC111 IC112 and 24c02) from this thread and always have display issues. I have TU 2008.7 with red boards.

Does anyone have dumps that works?

Thanks,

sterling
8th April, 2011, 03:58 AM
I also have a box that wont go by OBD Diag. Has anyone got a cure for this problem ????:manusign:

gauch
9th April, 2011, 10:08 PM
After all fights, I got my tacho back.
With 2008.7 bins - starts in few sec but empty car list
with 2008.1 - starts in 30-50 sec, display is messed up, but works and syncs.

thanks for aasass :)

marcolr
9th April, 2011, 10:30 PM
After all fights, I got my tacho back.
With 2008.7 bins - starts in few sec but empty car list
with 2008.1 - starts in 30-50 sec, display is messed up, but works and syncs.

thanks for aasass :)

Check your private messages. Don?t forget thanks.

Regards

gauch
9th April, 2011, 10:53 PM
marcolr,

thanks thanks thanks thanks

Tcd
10th April, 2011, 08:41 AM
Pleace help me tacho universal 2008/1 Jan erase dump fails from diga Erase "PIN" thanks in advansed?

Tcd
10th April, 2011, 08:42 AM
Any one "PIN" from diga Thanks

marcolr
10th April, 2011, 10:42 AM
Try to erase one by one. Pin must be 000000 or 123456 but in my case Tacho don?t let me erase all dump?s in one time.

Regards

Tcd
10th April, 2011, 10:49 PM
Marcolr? I Tacho Universal 2008 7:07 motherboard is red can you get a dump in the event to appear SYNC I almost bought one or more of her experience, and the pier would help thank in advance?

Tcd
12th April, 2011, 08:41 AM
Pleace help in Dump 7.07 2008 diga china clon ? Thanks in advansed

ACDC
16th May, 2011, 03:31 PM
I need a little help here guys.
I have a Tacho Universal with a 2008.1 software. Is there any way to update it to 2008.7? As I understand that is the latest version.
I wish to update it, because I also have a Keyreader Pro for the Tacho, but it doesn't seem to do much, when I connect them together. I'm guessing an update will help.
Excuse me if this was already explained but I got a bit confused by reading your posts. And also I'm still a newb here :P

Thanks in advance

jkschen
18th May, 2011, 02:40 PM
how to use this file , i also got a problem 'SYS" with my tacho 01.2008 . regards
just reprograme the IC24C02

tomlib
23rd June, 2011, 08:35 PM
I write again... :)

I have Tacho 2008/7 red pcb. After plug 12V I have blank screen. I load dump 2008/1 and diga starts but show on the display random characters in the background. I load 2008/7 from forum und FF to 24C02 and blank screen, diga not start, not illumination.

Could you help me?

kool_mi
28th June, 2011, 04:45 PM
I HAVE THIS MESSAGE IN MY TACHO 2007
SYNCRO
PLZ I NEED HELP

Dylan Chin
8th July, 2011, 09:45 AM
i need help!!!!!!!!!!
my tacho universal 2008 got problem
when i switch on the tacho,i press ok<continue>
it just show...???sgyn???...and dont move again
what can i do,please give me help.
Thanks so much

Dylan Chin
8th July, 2011, 10:46 AM
please help me!!
I got a tacho universal 2008(odometer collection)
when i switch on the power,i press ok<continue>,it just shown ..???sync???...
what can i do,
thanks in advance

chrismoore02
8th July, 2011, 04:18 PM
hello im new to this forum and have a tacho pro 2008 v7

has anyone managed to get the tachodump software to work with these devices?

i keep getting not in sync

mnay thanks

chris

marcolr
8th July, 2011, 09:00 PM
hello im new to this forum and have a tacho pro 2008 v7

has anyone managed to get the tachodump software to work with these devices?

i keep getting not in sync

mnay thanks

chris

1. Start your tacho
2. Go to menu "SYNC"
3. Use the COM cable (n? 83 in cable package tacho, is NOT a normal com cable)
4. Start Tachodump soft
5. Click on Connect button

That?s all

cange
16th July, 2011, 11:57 AM
please help me!!
I got a tacho universal 2008(odometer collection)
when i switch on the power,i press ok<continue>,it just shown ..???sync???...
what can i do,
thanks in advance

jus bay the kit and forget about this problem

Tacho pro / universal repair kit ic112 ic111 and 24c02 on eBay (end time 14-Aug-11 22:31:10 BST) (http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=220814563673&ssPageName=STRK:MESELX:IT)

jkschen
23rd July, 2011, 06:21 AM
please help me!!
I got a tacho universal 2008(odometer collection)
when i switch on the power,i press ok<continue>,it just shown ..???sync???...
what can i do,
thanks in advance


pls let me know your version is 2008.01 or July?

I might to help you, if you pcb board is green and is Jan 2008 version,

because is i just repaired back my Tu few months ago, now work properly and no any other sync, after back to normal , dont press ok instead the IC 24C02 still counter the vehicle list .

jkschen
27th July, 2011, 04:29 PM
1. Start your tacho
2. Go to menu "SYNC"
3. Use the COM cable (n? 83 in cable package tacho, is NOT a normal com cable)
4. Start Tachodump soft
5. Click on Connect button

That?s all

HI, This Com Cable is Null Cable, or The Communication cable? Thanks for advance! Do your have the Dump of red pcb July 2008, i only have the Jan 2008 version dump. Pls Pm to, very appreciate if you can share with me... Many thank, mate.

blacktoy
27th July, 2011, 08:49 PM
Hi Guys,

I have a problem with a TU2008 with red PCB:

- first i get the message "update language"
- i changed the 2 29F040 (IC) with 2 from a repair kit (01/2008)
-then i get the message $$$sync$$$
-i changed the AT24C02
- now it is working but:

need very long too boot (without the typical "klick")
display has some errors

How can i solve this problem?

best regards.

by the way:
why are the IC's damaged so often -> i had aroung 3 TU2008 with IC problems -> one gets damaged during the search for a Logincode at a MM Odometer of a Golf4 (IC's very very warm)

marcolr
28th July, 2011, 12:25 AM
HI, This Com Cable is Null Cable, or The Communication cable? Thanks for advance! Do your have the Dump of red pcb July 2008, i only have the Jan 2008 version dump. Pls Pm to, very appreciate if you can share with me... Many thank, mate.

It?s a null cable.

Check your mp

Regards