PDA

View Full Version : Need P0409 DTC OFF Ford Mondeo 2.0tdci


jjrp255630
13th August, 2015, 10:15 AM
hi, can put this dtc off.

regards

Delphy MPC555 Tdci
-12A650-LC
H5N30H21_96Kw_MM



P0409
jjrp255630
8th September, 2015, 12:18 PM
Up.........................................
LaraVAG
8th September, 2015, 08:48 PM
send e2p from ECU.
psico
8th September, 2015, 11:01 PM
test and report.

pass pm
psico
8th September, 2015, 11:02 PM
friend not possible send pass for you box


The following errors occurred with your submission

jjrp255630 has exceeded their stored private messages quota and cannot accept further messages until they clear some space.
Meat-Head
9th September, 2015, 06:33 PM
Perhaps if you dudnt password everything, which only hinders people and stops people learning, you would not have that problem!
psico
11th September, 2015, 09:34 PM
its ok, without pass
jjrp255630
14th September, 2015, 03:51 PM
i will test and report
xbobcz
15th September, 2015, 10:21 AM
It's only wasting a time with testing this file.
Replacing value 0409 with 0 in rail pressure map can't turn off DTC.
psico
16th September, 2015, 01:58 PM
you are ok, im sorry, this file its ok.
bertus82
16th September, 2015, 02:43 PM
This one is also a wasting of time, place is wrong,
even if you find proper 409 after some tries and you replace it with 0,
diagnostic gives you probably P0000 - unknown error
jjrp255630
17th September, 2015, 10:49 AM
This one is also a wasting of time, place is wrong,
even if you find proper 409 after some tries and you replace it with 0,
diagnostic gives you probably P0000 - unknown error


hi, you can do the right way so?