HOW TO READ EIS W906 SPRINTER 2007

[almagssbe]

Hello
i need help i have R270 , XPROG-M, AK400
all key lost , i need , how to read eis pls

[jakesman]

look in pictures should be something like this
http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=327072&stc=1http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=327073&stc=1

[almagssbe]

how to read mcu or what on xprog, how number mcu this type
thanks

[mercis]

read as 9s12 eeprom,xprogm automatic find it

[jakesman]

and do add 12-15 volt on x-prog sometimes it will give a error if the xprog is not pluged into the power supply

[mercis]

i use xprog only com port,

[AC_SHNITZER]

i use xprog only com port,
Better and safe , usb is only for eeproms desoldered :encouragement:

[jakesman]

Better and safe , usb is only for eeproms desoldered :encouragement:
ok so it is better to use the com port ?
if u have one because new pc's don't have them any more
i have a pci card with com port in my pc and i will for sure give it a try
thanx for this hint cause x-prog is buggy sometimes :top:

[almagssbe]

thanks
i read with xprog
error not read ok
i need digrm with r270 or ak400

[mercis]

xprog work perfect on 9s12

[almagssbe]

xprog work perfect on 9s12
thanks
ok , connected all line good
but stay read long time
How much time does it take

[rob h]

If you own a r270, then you would have the connection diagrams?
http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=327451&stc=1http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=327452&stc=1