PDA

View Full Version : HYUNDAI IX35 Airbag 95910-2Y300 VER.2.1



magdyman
19th August, 2015, 08:16 PM
Hello All
Please i need to clear crash data in my dump

eprom 25lc32

Regards

sawatdee0999
20th August, 2015, 09:03 AM
Try and good luck. Report back please.

327329

magdyman
20th August, 2015, 09:09 PM
Try and good luck. Report back please.

327329

Hello My Dear
I will test and inform you
Regards

Catdaddyfunk
21st August, 2015, 02:01 AM
Its a female?

credoline
21st August, 2015, 11:36 AM
************************************************** *****
:call: For more

sawatdee0999 (http://www.digital-kaos.co.uk/forums/member.php/212136-sawatdee0999) must tell us, its female or male


Its a female?

sawatdee0999
21st August, 2015, 08:44 PM
i'm a girl guy's btw. :)

Johnner
21st August, 2015, 08:47 PM
Please keep it decent people !!


Thank you...

magdyman
30th August, 2015, 06:49 PM
Try and good luck. Report back please.

327329

Hello
sorry for delay to answer, the car was in bodywork
i test but not work
by the scan tool the DTC for crash data is cleared but airbag lamp still on not go off.
Regards

magdyman
31st August, 2015, 04:35 AM
Hello
Is there any solution to clear crash data in my above dump?

Sent from my GT-I9300I using Tapatalk

sawatdee0999
31st August, 2015, 07:13 AM
what codes are left?

magdyman
31st August, 2015, 05:42 PM
what codes are left?
Hello
It is undefined code
After clear it doesn't appears but the lamp still on.

Sent from my GT-I9300I using Tapatalk

sawatdee0999
2nd September, 2015, 02:32 AM
okay, i'll look into it and clear you file this should be the last try.

magdyman
2nd September, 2015, 02:34 AM
i'm sorry, but your file isnt read correctly. the file size should be to 1000. which this isn't. yours stop off 0FF0. I will fix your file size and upload with a clear dump.
Many thanks
I will wait your clear file .
Regards.

Sent from my GT-I9300I using Tapatalk

sawatdee0999
2nd September, 2015, 02:54 AM
it was my mistake didnt look correclty lol. but its fix now i'll send you pass. i did a test on it and check if crash was out. should be gone.
if it is come back and give me a hug. =)


329143

magdyman
2nd September, 2015, 02:58 AM
I will try and report.
Regards.

Sent from my GT-I9300I using Tapatalk

magdyman
3rd September, 2015, 05:38 PM
it was my mistake didnt look correclty lol. but its fix now i'll send you pass. i did a test on it and check if crash was out. should be gone.
if it is come back and give me a hug. =)


329143
Hello
I have try this file
The same result lamp still on.
But new result the ecu can show the right DTC .
Regards

Sent from my GT-I9300I using Tapatalk

sawatdee0999
4th September, 2015, 04:48 AM
what were the dtc problem?

magdyman
4th September, 2015, 05:06 AM
what were the dtc problem?
Undefined DTC found after clear
I found DTC for driver p/t
I fix the driver p/t then clear DTC
Then no DTC found, I try to check again many times I found no DTC but the airbag lamp go off then still on immediately.

Sent from my GT-I9300I using Tapatalk

magdyman
5th September, 2015, 05:49 PM
Hello
is there any solution to get good clear dump?

Sent from my GT-I9300I using Tapatalk

magdyman
6th September, 2015, 10:15 PM
Hello All
Could i have get a good tested clear dump for my crash file?
Regards

magdyman
8th September, 2015, 06:02 AM
Hello
It solved by another clear dump
It is OK.
Regards

Sent from my GT-I9300I using Tapatalk