toyota sequoia add key to dump

[philipcoin]

hello mate,
please need help on toyota sequoia need to add key to dump
key read by zedbull
thank you.
key data
7E2D8AFCD0000000
00D8067E0000



THAN YOU.

[ray-ray]

Grasshopper would like to learn how to do these suv by dump. Gwee can you share ?

[ngakson2002]

Here you go

Best Regards, Serge

[philipcoin]

thanks mate,
test and report.

[Bllinda]

maybe try this ....

[philipcoin]

Here you go

Best Regards, Serge


you file start once and dies immo light blink.
thank you.

[philipcoin]

maybe try this ....


test your file and report.
thank you.

[philipcoin]

maybe try this ....


Hello mate,
Your file did not start.

Need help .......
Thank you

[Bllinda]

Enter the following key data to the E.H-Electronic.Head. If the original.
and check

.... 7E.4C.21.34.D0.00.00.00.00.2F.3F.7E.00.00 ....


Hello mate,
Your file did not start.

Need help .......
Thank you

[ngakson2002]

you file start once and dies immo light blink.
thank you.

Hello Mate,
As Gwee recommended, take the screen shot of the key data and post here.Your key Data here may not be the TIRIS DATA.

Best Regards

[ray-ray]

93c66a X8bit. Mode is how you should be read the EEPROM . I'll say it again if pin 7 is tied to pin 5 ( 8 bit mode is your only choose you to get a proper read.)

[ngakson2002]

Hello Mate,

Sorry made error in dump at my first post and correction has be made in the one attached.Reference to ray-ray solution, test the two dumps attached and if still not work followed Gwee instruction

Best Regards, Serge

[Bllinda]

ngakson2002. (http://www.digital-kaos.co.uk/forums/member.php/110214-ngakson2002)8 and 16 bit damp the same.

[ngakson2002]

ngakson2002. (http://www.digital-kaos.co.uk/forums/member.php/110214-ngakson2002)8 and 16 bit damp the same.


Thanks mate,I also noticed that.Thus based on the ray-ray suggestion i have edited the transponder data differently in the two dumps i posted .
If none of the two dump starts the car, then Gwee is right, asking him to send the screen shot of the transponder reading because he may have sent another data than the TIRIS DATA.

Best Regards

[philipcoin]

Thanks mate
Have post picture

[ngakson2002]

Thanks mate
Have post picture

Hello Mate,

Transponder data displayed is not TIRIS DATA.Connect Zedbull to PC> start the software and Read the transponder via PC.After this take the screen shoot or read the data in the Window name Tiris Data and post.


Best Regards

[ray-ray]

Lets start over as Toyota Sequoia has different system from 2001-02 ecu immo. Or 2003-07 separate immo.

[philipcoin]

Lets start over as Toyota Sequoia has different system from 2001-02 ecu immo. Or 2003-07 separate immo.

Hi Ray-ray,
The sequoia is 2004 and has separate immo box
Thank you.

[philipcoin]

Hello Mate,

Transponder data displayed is not TIRIS DATA.Connect Zedbull to PC> start the software and Read the transponder via PC.After this take the screen shoot or read the data in the Window name Tiris Data and post.


Best Regards


OK mate
Thank you
Will read and post data.
Thank you.

[philipcoin]

[QUOTE=ngakson2002;2582489]Hello Mate,

Sorry made error in dump at my first post and correction has be made in the one attached.Reference to ray-ray solution, test the two dumps attached and if still not work followed Gwee instruction

hello
your file did not work
thank you.

[ngakson2002]

[QUOTE=ngakson2002;2582489]Hello Mate,

Sorry made error in dump at my first post and correction has be made in the one attached.Reference to ray-ray solution, test the two dumps attached and if still not work followed Gwee instruction

hello
your file did not work
thank you.


Hello Mate,
It is normal that the files did not work.Just because of wrong transponder data.Post transponder Tiris data here and everything will be OK

regards

[Bllinda]

Yes you are right .... but could and counting ;). only takes up a lot of time.
Thanks mate,I also noticed that.Thus based on the ray-ray suggestion i have edited the transponder data differently in the two dumps i posted .
If none of the two dump starts the car, then Gwee is right, asking him to send the screen shot of the transponder reading because he may have sent another data than the TIRIS D (http://www.digital-kaos.co.uk/forums/showthread.php/192942-eeprom-data-generate-key-id-13-id-33-4c/#post1002489)ATA.

Best Regards

[Bllinda]

It is simple but was unable to insert a ....


Enter the following key data to the E.H-Electronic.Head. If the original.
and check

.... 7E.4C.21.34.D0.00.00.00.00.2F.3F.7E.00.00 ....

.... ....
key :
xx.2D.8A.FC.D0.00.00.00.00.D8.06.xx.00 00
T.F.
xx.B4.51.3F.0B.00.00.00.00.??.??.xx.00.00

[philipcoin]

Hello mates
Sorry for mine late reply
Thank you.


Please here you are post picture..

[ray-ray]

Gwee have we not gone threw these before? How to make a (4C) fit into a 4D suv? That chip will not fit that system, just like 80bit system and a 40 bit chip key. Solution get the proper key. Soon I will post a few test I made on my own.

[philipcoin]

Gwee have we not gone threw these before? How to make a (4C) fit into a 4D suv? That chip will not fit that system, just like 80bit system and a 40 bit chip key. Solution get the proper key. Soon I will post a few test I made on my own.


sir Ray-ray,
please do you mean the sequoia is 4D not 4C right?
thank you

[ngakson2002]

.................................................. .........

[Bllinda]

What Immo box serial namber?

[philipcoin]

.................................................. .........


test and report.

thank you.

[Bllinda]

The key must be id4.D-6.7 ....

tm.pr0 see how 4.d.

[philipcoin]

What Immo box serial namber?


Hello mate,
Picture of immo box


Thank you.

[geeroam]

This looks like 4d67 box

[Bllinda]

Your key really is 4.d.6.7.. (http://www.digital-kaos.co.uk/forums/showthread.php/484345-Toyota-sequoia-2004year?p=2584261#post2584261)..
Hello mate,
Picture of immo box


Thank you.

[philipcoin]

Your key really is 4.d.6.7.. (http://www.digital-kaos.co.uk/forums/showthread.php/484345-Toyota-sequoia-2004year?p=2584261#post2584261)..



mat,
please should i post 4d67 chip data
or reset with t300
is the dump posted good or corrupted.



thank you

[Bllinda]

Similar to your damp is a good 1.6.bit

[bram380]

the dump is bad.
but post here keys data (id67 32, 52 or 92)
i will try to repair it.

[philipcoin]

the dump is bad.
but post here keys data (id67 32, 52 or 92)
i will try to repair it.

Hello
Thank you will do key data

[philipcoin]

the dump is bad.
but post here keys data (id67 32, 52 or 92)
i will try to repair it.

Hi mates
Please here is the 4d67

Thank you...

[bram380]

Here u go:

[Bllinda]

the car starts up and left .... :)


Hi mates
Please here is the 4d67

Thank you...

[ngakson2002]

Hello mate,
Picture of immo box


Thank you.

Hello mate,
In case Friend Bran380 dump does not work, used your immo Virgin dump attached and learn the key.

1) Program immo with the dump attached
2) Fit immo back to the car; the security light must blink
3) Insert the first key in ignition switch (do not turn) for 2s, the security light will remain solid.
4) Remove and repeat step3 for the other keys.

NB If you have only one key, insert it and when the security light remain solid, Turn the key ON and OF 5 times to close the programming and then start the engine

Best Regards

[ray-ray]

That will not keep the running into you marry immo to ecu
4/13 grounded on the obd2 for 30min.

[philipcoin]

Here u go:



thank you
will test and report..

[bali motor]

THIS DUMP 4D KEY. USE VIRGIN NGAKSON, AND FOLLOW THE STEP.

[ray-ray]

Any Final words from Gwee? So I can put it in my grasshopper bible, where all the truth is written down.

[philipcoin]

Here u go:

hello bram380
your file did not work.

thank you.

[bram380]

ok.
you need to check configuration eeprom while programming, 16bit not same 8bit.
short pin 4 & 13 obd port for syncrone immo-ecu.

[philipcoin]

Hello mate,
In case Friend Bran380 dump does not work, used your immo Virgin dump attached and learn the key.

1) Program immo with the dump attached
2) Fit immo back to the car; the security light must blink
3) Insert the first key in ignition switch (do not turn) for 2s, the security light will remain solid.
4) Remove and repeat step3 for the other keys.

NB If you have only one key, insert it and when the security light remain solid, Turn the key ON and OF 5 times to close the programming and then start the engine

Best Regards



hello mate,
i follow the steps
today try you dump but yet no hope.
car start once and dies.

bridge 4 and for 30mins

thank you.

[philipcoin]

if still no start, post immo part number and will start :)

hello mate,
i post immo part number.

thank you..

[bram380]

you have problem while reading and writing eeprom data.
Read eeprom as 16bit,
and write eeprom as 16bit.

[philipcoin]

thank you mate,
will write as 16bit
use 4d67

thank you.

[ray-ray]

I read as 8bit mode 93c66A (on the chip pin 7 is tied to pin 5 ) on the datasheet that how you determine 8bit or 16bit read. Problem is your EEPROM programmer (upa display 16bit but reads it in 8bit format, scrabble a few chips that way.

[mojomojo]

Did you read on board? There is a problem reading this particular 93cl66 epprom onboard. You need to short the oscillator on this board. I had done this car some years back. Will try to get picture tomorrow, I could confirm this is definitely a 4D67 chip but there is not way of doing quick reset through obd. If you leave info in FFs it goes into auto learn mode in which you can then add the 4d keys by cycling them just as if you just did a "QUICK RESET".

Please add me Rep if this helps...



thank you mate,
will write as 16bit
use 4d67

thank you.