PDA

View Full Version : Peugeot 406 coupe Transponder ID


bangreno
22nd August, 2015, 03:07 PM
Hi, I need to order transponder key for this car
Vf38crfrr80985473
ID45 or 46 is suitable ?
lekingabs
22nd August, 2015, 04:11 PM
id 45 or order pcf7935as
bangreno
22nd August, 2015, 04:45 PM
id 45 or order pcf7935as
Ok. I'll produce ID45 with 7935.
Thanks
bangreno
23rd August, 2015, 08:05 PM
Prepared a 7935 as ID45 like attached pict , but not ok , with T300 in live Data I got 'Transponder : BAD'. 327780
nexusjose
23rd August, 2015, 08:52 PM
I think like 206 from 2001 you must precode and then code with BSI , i make one with Delphi


Enviado desde mi iPhone utilizando Tapatalk
nexusjose
23rd August, 2015, 08:54 PM
Prepared a 7935 as ID45 like attached pict , but not ok , with T300 in live Data I got 'Transponder : BAD'. 327780

Push b and you look your Code for key normally bjbf only 4 words


Enviado desde mi iPhone utilizando Tapatalk
bangreno
24th August, 2015, 03:49 PM
Prepared a 7935 as ID45 like attached pict , but not ok , with T300 in live Data I got 'Transponder : BAD'. 327780327875

But vehicle correct pin is S3LN , and zedbull show A3LN.
This transponder I tried once to program on car
bangreno
24th August, 2015, 03:50 PM
Don't know why transponder pin is different from car correct pin. Your help please. Thanks.
lion0304
25th August, 2015, 01:45 AM
You can read BSI or Immobox and make key buy dump with Effi or
Use pincode with PP2000, never failed. Check coil antenna around ignition lock too.
I remember 1 time i programme a Xsara with PP2000, it showed key not reconised, so i make diagnostic and found antenna bad. After repair or change, programme the key in 5mn.