VW GOL IAW 4BV.FR WITH ST10F280

[araby80]

Hello ....Before i write this post i searched alot over many fourms but i did not find any solution whatever......

I need to immo off vw gol ecu iaw 4bv.fr with st10f280 no eeproms and i need to do immo off for this ecu there is no immobox

Any solution or feedback for this issue?

Thanks all

Sent from my SM-T111 using Tapatalk

[dave11674]

my eyes must be playing up
cos i cant read anything on that label
can you post a clearer pic pls

dave

[araby80]

http://images.tapatalk-cdn.com/15/08/22/380d99b453a549afa9ef3e722de94934.jpghttp://images.tapatalk-cdn.com/15/08/22/dcef9af8a1b3315402c02e76a2f442a5.jpg

Sent from my SM-T111 using Tapatalk

[lekingabs]

remove eprom car star

[araby80]

remove eprom car star
There is no eeprom just mcu st10f275

Sent from my SM-T111 using Tapatalk

[araby80]

Sorry mcu st10f280

Sent from my SM-T111 using Tapatalk

[araby80]

Any body know full pinout for this ecu iaw4bv.fr

Sent from my SM-T111 using Tapatalk

[araby80]

I searched for immo off or verginiz for ecus that working with mcu st10f280 like volks fox iaw4bv and i found some ecu for fait palio which have st10f280 and it,s no iaw 4sf and i found reset dump for this palio ecu the question is cab this dump belong,s to palio iaw 4sf work with fox ecu iaw 4bv or not?

I hope any experts here confirme answer to my question


Thanks all

Sent from my SM-T111 using Tapatalk

[araby80]

Anybody here can share virgin dump for st10f280

Sent from my SM-T111 using Tapatalk

[araby80]

Problem solved with immo off dump

Sent from my SM-T111 using Tapatalk

[soft4ecu]

Hello, have same ecu to make immo off (car was stolen, no keys and no immo box) . Posible to get your off dump ? tried one solution not worked. really urgent. Thanks

[datapage]

do not waste your time, do not have immobilizer off 4bv.

[soft4ecu]

do not waste your time, do not have immobilizer off 4bv.

Ok, i see thanks, problem here many cheap talking people .... like this araby80.

[araby80]

Ok, i see thanks, problem here many cheap talking people .... like this araby80.

hello soft4ecu we are here to help each other and i was away since you send your post so that i just see it reight now when i searched for solution for iaw4bv here in dk nobody help me,,,

some people do help and others do not !

at the end i have to help you because i learened to give support from dk fourm

[Music73]

hello soft4ecu we are here to help each other and i was away since you send your post so that i just see it reight now when i searched for solution for iaw4bv here in dk nobody help me,,,

some people do help and others do not !

at the end i have to help you because i learened to give support from dk fourm

hi

with what device did you manage to read this ECU.. I have tried wth K-tag and Galletto but both without success..

Also could i also get password for immo file for once i have managed to get a read from this ECU.

Cheers

Nik

[araby80]

hi

with what device did you manage to read this ECU.. I have tried wth K-tag and Galletto but both without success..

Also could i also get password for immo file for once i have managed to get a read from this ECU.

Cheers

Nik
You should read it with fgtech i suscess to read flash of st10f280 with fgtech ..and about pass i will send to you as soon as i come back from summer vacation [emoji1] cause i do not remember it
good luck

Sent from my SM-J700H using Tapatalk

[Music73]

Excellent... thanks... will try again with fgtech... cheers nik

Sent from my SM-G935F using Tapatalk

[araby80]

Excellent... thanks... will try again with fgtech... cheers nik

Sent from my SM-G935F using Tapatalk
You have to make jumper with 100 ohm like fgtech instruction image and there is track you have to cut it before you could start reading

Sent from my SM-J700H using Tapatalk

[Music73]

Yeah I did that but still no go... I shall try it with my v50 and see if that makes a difference.. to my v54..

Sent from my SM-G935F using Tapatalk

[mischiatti2]

Hi friend, need file imooff 4bv, please send-me password
Thanks
Mischiatti

[araby80]

Hi friend, need file imooff 4bv, please send-me password
Thanks
Mischiatti

dear friend really I do not remember password I will send you dump when I come back to home

good luck

[araby80]

dear friend really I do not remember password I will send you dump when I come back to home

good luck

iaw4bv.er tested 100% immo off

pass pm

[khalilo_de]

iaw4bv.er tested 100% immo off

pass pm
Pass pleas

Envoy? de mon SM-G930F en utilisant Tapatalk

[araby80]

Pass pleas

Envoy? de mon SM-G930F en utilisant Tapatalk
Pasd send in your inbox
good luck

Sent from my SM-J700H using Tapatalk

[MOHCIN2]

PASS PLEASE MR ARABY80

[a2000]

can i get the pass??? it will be very usefull i have one vw fox with immo mess. thanks !

[SPIDER MAN2]

PASS PLEASE MR ARABY80

[Team dz]

READ IMMO BOX EEPROM 93LC56 PROGRAMME IMMO WITH VCDS

[Team dz]

NO IMMO OFF THIS IS ECU SUPPERTED VIRGIN FILE :applause::applause::applause:

[Mohssine]

thannnnnnnnnnnnnks araby80

[jackeldestripador]

hi friend can you help me with this file for ktag? Thanks for your help!

[jackeldestripador]

see attached orginial file

[Mohssine]

Hello my friend please help me reading the ecu gol iwa4BV.FR programmer galletto wait for your answer and thank you very much

[Mohssine]

You have to make jumper with 100 ohm like fgtech instruction image and there is track you have to cut it before you could start reading

Sent from my SM-J700H using Tapatalk


Hello my friend please help me reading the ecu gol iwa4BV.FR programmer galletto wait for your answer and thank you very much

[iyass]

Thank u bro can u give me the pass please i have same problem

Sent from my SM-N950F using Tapatalk

[krakkamal]

Pass pleas

[TRISIEN]

need file imooff 4bv, please send-me password
Thanks araby 80

[TRISIEN]

sory iaw 4bv.fr

[Fogz]

Hi
Please can you give me the password?
Thank you in advance

[m0dx]

hello soft4ecu we are here to help each other and i was away since you send your post so that i just see it reight now when i searched for solution for iaw4bv here in dk nobody help me,,,

some people do help and others do not !

at the end i have to help you because i learened to give support from dk fourm


hello friend if you could help me I have a VW Gol with ecu IAW 4BV.FR if I could do the immo off I would appreciate it this is the original reading with ktm-100

[diagnancy]

hi
can i have the passwordiaw 4bv.fr off
please

[goranradovicpg]

Hello. I have a problem to read this conputer. How you read? I tray with ktag, galleto but without success. Connect 12v on two pins, ground, but k line is green wire? Thanks in advance

Poslato sa VOG-L29 pomoću Tapatoka

[goranradovicpg]

Connect 100 om and cut linehttps://uploads.tapatalk-cdn.com/20220213/fdb26e5bd61a4cada3a7b9a439b22ea6.jpg

Poslato sa VOG-L29 pomoću Tapatoka

[BANE112]

PLEASE I NEED PASS...I HAWE SAME PROBLEM

[alphamaster]

To read 4bv with ktag, follow the original instructions and add this one. Jump this point marked in the photo to GND. Hug.

1017294

[casued]

Can you send me the pass please?.
Thank you!!!

[Jonny1337]

immo off possible ?